Adds a real, dated section to ch.10 (Hardware and board) covering the
two-independent-flash architecture (neural-network data vs. boot
bitstream), the ESP32<->ECP5 JTAG-only link, and the real CABGA381
ball assignments (JTAG/PROGRAMN/INITN/DONE/CFG[2:0]/MSPI dedicated
pins), matching decisions.log DEC-0041.
Also closes ch.7's (Host interface) own long-standing "still needed"
list: the physical transport (spi_host_bridge.v) and the completion-
notification path (FPGA_DATA_READY) it used to flag as missing are
both now real -- described with the same system-idle-detector formula
implemented in the RTL.
Compiled clean (44 pages, 0 errors).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013xXuuRUWZScuo1DeYJxs3v
Establishes the real ESP32<->ECP5 programming architecture: flash #1
(neural-network data, existing V1 subsystem, ball reserved not yet
wired into V2) stays separate from flash #2 (boot bitstream, MSPI
auto-boot, CFG[2:0]=[0,1,0]); ESP32 talks JTAG only (bit-banged, no
hardware JTAG-master peripheral on S3/C6), updating flash #2 through
the ECP5's own internal sysCONFIG-to-SPI bridge, never driving the
flash pins directly -- zero bus contention, confirmed against the real
Lattice hardware checklist and sysCONFIG user guide.
Adds real, verified ball assignments (official Lattice CABGA381 CSV +
Project Trellis iodb.json) for JTAG, PROGRAMN/INITN/DONE, CFG[2:0],
and the MSPI dedicated pins -- all written to docs/pinouts.md.
Implements FPGA_DATA_READY as real RTL: a system-idle detector
(dependency_manager's any_pending OR neural_director's !queue_empty OR
any active slot), sticky on the busy->idle edge, self-clearing on new
work -- not a per-neuron completion pulse, which was confirmed too
fine-grained. Bit-exact regression re-verified at N_SLOTS=4 and 8
(zero cycle-count change), new explicit data_ready assertion check
added to the D-Stress testbench (PASS both configs), and a fresh
Yosys+nextpnr-ecp5 placement check (0 errors, data_ready placed at G3).
Also fixes a real, independently-found bug while editing an adjacent
file: nms_neural_multiprocessor_sdram_unified.v's own sdram_a port was
still [11:0] (12 bits), stale from before the 64MB/13-bit memory
upgrade. Not exercised by the real board-level top (which wires SDRAM
directly, bypassing this wrapper) but WAS silently truncating A12 in
every D-Stress simulation this session, including today's earlier
ERR-0029 verification runs. Assessed impact: all D-Stress test
addresses used this session decode to rows under 4096 (bit 12 never
actually needed), so no false-positive PASS is believed to have
resulted -- but the full 64MB space was never actually exercised
through this wrapper. Fixed; re-verified bit-exact with identical
cycle counts.
See decisions.log DEC-0041 for full detail.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013xXuuRUWZScuo1DeYJxs3v
Was a separate, untracked directory (DataSheet/) outside the repo.
Renamed to lowercase and moved in as hardware/v2/docs/datasheet/, with
its own .gitignore for LaTeX build byproducts (compiled PDFs stay
tracked, .aux/.log/.toc/etc do not). Now versioned and shares this
repo's own remote instead of living untracked on disk.
Content: IT+EN LaTeX chapter sources, reference manufacturer PDFs, and
compiled datasheet PDFs including the 2026-09-07 SDRAM upgrade
addendum (AS4C32M16SB-7BIN part/pinout/timing) in the v2-en chapters.
Note: hardware/v2/docs/DatasheetLatex/ (and the v1 sibling) is a
separate, already-tracked, differently-structured LaTeX document that
predates this move -- left untouched, not merged, since its chapter
set and content differ and merging was not requested.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013xXuuRUWZScuo1DeYJxs3v
micheleandClaude Sonnet 5