LS/FS rates, pull-up/down, and VBUS come from the base spec. Cable Z0 90 ohm is CABLE; PCB should 90 ohm is RECOMMENDED. L2 differential_impedance stays UNKNOWN. Rp/Rd/Ra from CabCon Tables 4-27/28/29. IEEE Section One/Three and HDMI still missing. PDFs not in git.
NUMERIC rows cite document title, revision, section/table, and page. USB Zdiff, Type-C Rp/Rd, 10BASE-T, and 1000BASE-T stay UNKNOWN. PDFs are not in git.
USB 2.0 is protocol, Type-C is connector, USB 2.0 over Type-C is the
implementation. Ethernet/HDMI skeletons stay UNKNOWN with needed_document.
No invented ohms; Mini HDMI is connector-only; RJ45 is not 1000BASE-T.
PCIe/CXL keep logical vs physical ids. I2C, CAN, RGMII and missing
high-speed processor interfaces get required_checks; numbers stay
UNKNOWN/MISSING_SOURCE until an official cite. No invented ohms.
L3 CHANNEL structure for timing budget, insertion loss, return loss,
crosstalk, and complete channel. Numeric PASS/FAIL only from existing
channel FACT; otherwise a visible skip. No OpenEMS, no invented S-parameters,
no M6 packs.
Instances, L0–L3 max level, measured/limit/margin/source/method, traceability chain. FAIL listed first, not under Warning. Visible skips. No pack numbers, no L3 solver.
Presence and connection only. FAIL solely on missing MANDATORY structure.
AXI4 internal is NOT_APPLICABLE, not FAIL. RECOMMENDED never FAIL. No L1–L3
and no invented ohms/mm/ps.
physical_bus_instance from declaration, silicon/part, pin/net names, and
pairs. USB and DDR fixtures emit groups; AXI4 internal attaches no PCB
nets. Ambiguity is REVIEW, not FAIL. No L0–L3 certifier and no invented Z.
Versioned JSON skeletons without invented ohms/mm/ps. RECOMMENDED is not
FAIL-mandatory; typical-as-standard is rejected. Report Protocolli is empty
until recognition (M1+). Native src overlays inherited periscopex on the
package path.
PCB tree folders are Error / Warning / Info. U18 with PE-PLC-002
ERROR is ERROR, not WARNING. J2 and other connectors list with ICs.
PE-PLC stays in the PCB exam bucket. No deploy.
WROOM lands are not the ESP32 die table (U11). QFN-48 pads 25–48 are
not extras when extraction stopped at 1–24 (U12). VQFN is the QFN
family (U19 24-QFN 4×4). Real extra signal pads still ERROR.
USB-C A5/B5 are contacts, not EP. Datasheet pintable, KiCad
.kicad_mod, and embedded PCB pads join by pin identity. Missing
pintable skips; scalar pin_count is never an ERROR authority.
POST /api/library/datasheets now writes an IC inbox card or a
passive/discrete model. Empty pintables never enter library/extracted.
AF Board+AI runs after unchanged run_pcb_checks (PE-SI / HF line stay).
Add /api/library datasheet import and component GET/PUT with no exam.
Reorganize pytest into datasheet, library, schematic, PCB, and AF+AI.
Document Rust criteria (none chosen; no rustup) and coding conformity.
Phase B: stackup vs fab spec, via current with datasheet I (no IPC via
chart), ESD pad distance, USB-PD, PoE isolation voltage, antenna, and
PDN Z(f). Skip without evidence. Not DRC or FEM.
Phase A: stub, return-split, and BOM termination on buses present on the
graph; DDR/CPU/FPGA class certifiers only when that device exists. Skip
without evidence. Via, pad, track, and zone stay distinct. Not DRC or FEM.
Replace the schematic-only DeepSeek scaffold with what this tree actually is: full board analysis for fab, gated interface certifiers, evidence rules, and the run/Docker/update commands that exist on disk.
USB-C/RJ45/PoE/DDR3 are the method, not a catalog. No connector means
no finding. Bare RJ45 is Ethernet only; PoE needs PoE evidence. HubAudio
has USB-C and PoE MagJack, not DDR. Skip-I unchanged.
Dedicated deterministic engines certify class and connection integrity
(CC1/CC2, Rd 5.1 kΩ, VBUS/GND, SuperSpeed if USB3; 10/100 vs GbE
magnetics; PoE only with evidence). Missing evidence is INSUFFICIENT
or N/A, never invented PoE, SuperSpeed, Z, or I. No FEM, no via IPC.
KiCad 9/10 name-only nets fill the index. PE-LAY-004 counts tracks, vias,
and pours and skips NC nets. Missing I_load is INSUFFICIENT. EP pads are
not PE-BOM-011; abs-max binds the named pin. Kelvin/EMI/PI ignore NC and
IN±. LQW decodes nH; BLM/FB is a bead, not DCR as Z.
HubAudio U11/U12/U38 400'd after a thinking-only review turn because
the retry dropped reasoning_content. Native client now appends that
field and continues; hierarchical sheet ingest stays in 2.60.10.
Apri progetto collects every *.kicad_sch beside the .kicad_pro and
follows Sheetfile/(sheet)/file= into a subfolder. .history, .git, and
backups are not walked. Not only HubAudio.kicad_sch.
Apri progetto walked every nested file (HubAudio .history ~2000) so
onFilesChange never ran and Next stayed disabled. Read only kicad_pro,
sch, and pcb in the project dir; timeout to an error; enable Next when
.kicad_pro is in.
The Mac Carica dialog was a file input (accept empty, no working
webkitdirectory). Use showDirectoryPicker or a hidden input with
webkitdirectory=true and no accept. Ignore empty/cancel picks.
Safari/macOS often puts .kicad_pro on webkitRelativePath while name is
the stem. Match both, sniff JSON if the suffix is missing, and set
webkitdirectory on the input DOM so the folder picker actually recurses.
Apri progetto KiCad picks the folder that contains .kicad_pro and loads
sibling hierarchical sheets and the matching .kicad_pcb. Connectivity and
MPN/PNM/Value come from the schematic; a leftover PADS .asc is ignored.
A lone .kicad_pro upload is rejected unless that path exists on disk.
HubAudio CSV has no U13–U39 rows; those refs stay without an invented part number. IC Value fills MPN when PNM is blank. Progress no longer labels netlist-only ICs as “no MPN in BOM”.
graph_build searches project uploads and library blob refs, persists recovered Z, and still loads when the PDF has no impedance. Ohms are not written to henries.
Partial layouts still use MODE=pcb. Missing copper is INSUFFICIENT or
skipped, never Euclidean stand-in tracks. Via≠Pad unchanged. DELETE
/api/projects/{id} is owner-only with a dashboard confirm dialog.
Frontend periscope-web manifests, pip requirements, and EDA logos/examples
overlay from src. Docker installs from those files. Unused PinScope public
blobs are dockerignored. Landing png/gif stay in dependency until native
captures exist.
privacy, terms, file-guide, and changelog stay Periscope operator text at 2.56.0. Docker copies src changelog last; the frontend image keeps content/ at runtime.
repo_paths and compose mount src/taxonomy first. Docker copies dependency then src for taxonomy and skills. SKILL.md prose is rewritten; schema IDs and validate contracts stay. Manifest 1.14.0. Do not run upload_skills.py.
validate/validation_tools alias native lookup and review tools. Passive
resolve, derating, BOM summary, pin-mux, LED current, and net-function
tokens are original Periscope code. finding_engine and pcb_* unchanged.
TAXONOMY_DIR is taxonomy_dir() so src reads dependency/taxonomy until a src tree exists. Inherited taxonomy.py stays on disk. Changelog covers models, parsers, and taxonomy.
utils, resolve_passives, derating, bom_summary, pin_mux, LED current,
pin-function tokens, plus live analysis validate/validation_tools/pipeline/
validation/extraction, skills, and taxonomy JSON now resolve from
periscope/src. Inherited copies stay in dependency/. repo_paths prefers
src then /app; Docker copies src taxonomy/skills last.
Src-first imports now load graph/parsers/EDIF/models/taxonomy from
periscope/src. Inherited copies stay in dependency/. Taxonomy JSON path
uses repo_paths. New periscope/lens mark at existing 16/32/180/192/512
favicon sizes; header uses PeriscopeMark instead of the lucide CPU glyph.
Cached layout_graph still listed stitching via-pads as component pads,
so PE-BOM-011 kept firing after the ingest fix. PCB/placement jobs now
parse the board file and refresh the cache.
KiCad stitching/thermal vias inside a footprint are (via) or copper-only
thru_hole (pad) objects. parse_kicad_pcb was appending every (pad) to
LayoutFootprint.pads, so PE-BOM-011 compared datasheet pin_count to via
numbers. Nested vias join LayoutGraph.vias; soldered THT pads stay pads.
Live review_ic_async comes from review_session; PinScope validate.py and
validation_tools.py stay in dependency as _inherited_review_ic_async fallback.
michele