Implements GET /api/audio/levels, reading all six 1×RTA level-detector
cells on demand (no background polling, no caching -- only runs when
called, per explicit request this session).
The read mechanism is the ADAU1701's documented Data Capture Register
(address 2074/0x081A, datasheet Rev.0 pp.30,36: write a (program-step,
register-select) pair to configure what the register mirrors, then
read back a 3-byte 5.19 twos-complement value). The per-meter program-
step indices are taken verbatim from SigmaStudio's own compiler output
(Firmware/ADAU1701-Firmware/IC 1_DigiRadioFinale/net_list_out2/
trap.dat), not invented -- the datasheet explicitly says these indices
must come from that compiler-generated file.
Confirmed live: all six points return distinct, plausible dBFS values,
and the output meters track a master-volume change.
Also folds two pieces of live user feedback into the app brief: the
volume slider should reach +12 dB (the firmware's real ceiling), not
stop at 0 dB, and the new levels endpoint is what a "VU meter" UI
section should poll instead of faking one.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds the new SigmaStudio project export (Sigmastudio.zip, source
screenshot) alongside the existing project archives in Sigmastudio/,
rewrites docs/adau1701-sigmastudio-analysis.md for the 224-parameter
program (exclusive source mux replacing the old mixer, Bass Boost1/
SPhat1 dedicated blocks, unimplemented VU-meter readback), adds the
DigiRadioFinale figure/table to the manual, and adds a brief for the
iOS app side (active_source API shape, enhancement semantics change)
to hand to Cursor.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Root cause (found via SigmaStudio firmware analysis requested this
session): NVS was initialized AFTER HardwareBootstrap::boot(), which
internally calls AudioService::loadAndApply() to restore the saved
mixer/EQ/master-volume profile. Every nvs_open() inside
NvsAudioProfileStore::hasProfile()/loadProfile() failed with
ESP_ERR_NVS_NOT_INITIALIZED (0x1101), silently swallowed as "no saved
profile" -- the audio profile was never actually restored on any boot,
regardless of how many times it was saved via PUT /api/audio/profile.
Fixed by moving secure_store::initEncryptedStorage() to the top of
app_main(), before HardwareBootstrap::boot() (nvs_flash_init() has no
hardware dependency, so this is safe).
Second, related bug: HardwareBootstrap::boot() called
AudioService::applyRadioFirstMix() unconditionally right after
loadAndApply(), discarding any just-restored mixer/master values on
every boot. loadAndApply() now returns whether it actually restored a
profile from NVS; the radio-first fallback only applies when nothing
was saved.
Verified live: a distinct mixer+master+5-EQ-band test pattern now
survives a full reboot exactly as saved (previously always reset to
factory default). DAB/FM/BT unaffected.
Also: added a "locked" flag per EQ band in the audio profile JSON --
band 0 is always locked (fixed high-pass, Adau1701Driver::applyEq()
never safeloads it) and bands 1-2/3-5 are locked whenever
bass_level/stereo_level is active (core::applyEnhancementsToEq()
overwrites them with formula-derived values). This was previously
undiscoverable from the API -- GET echoed back the stored, inert value
with no indication it wasn't what was actually playing.
Full register-by-register analysis of the compiled SigmaStudio program
(signal chain, all 74 Parameter RAM addresses grouped by function, HTTP
API mapping, every endpoint tested live) in
docs/adau1701-sigmastudio-analysis.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Extends the existing FM/DAB ANTCAP EEPROM persistence pattern
(Eeprom24aa::writeFmAntCap/writeDabAntCap) to the crystal trim found by
POST /api/tuner/xtal-calibrate, which previously only applied live and
was lost on every reboot.
- Eeprom24aa gains readXtalCalibration()/writeXtalCalibration() at word
addresses 0x02 (ibias), 0x03 (ctun), 0x04-0x07 (xtalFreqHz,
big-endian), right after the existing FM/DAB ANTCAP bytes.
- HardwareBootstrap::boot() now boots ADAU1701 before Si4684 (needed so
the EEPROM read, which borrows ADAU1701's I2C bus, can happen before
Si4684's boot() call, which takes the crystal trim as an argument),
loads the saved trim if present, and falls back to the compiled-in
defaults (ibias=72, ctun=0, xtalFreqHz=19199750) otherwise.
- POST /api/tuner/xtal-calibrate now persists every successful live
recalibration automatically ("persisted":true/false in the response)
via a new saveXtalCalibration()/net::AntennaCalibration::saveXtal
bridge, mirroring the ANTCAP save pattern.
Verified live: boot log confirms "Xtal not calibrated" before the first
save, "Xtal calibration loaded: ibias=72 ctun=0 xtal_freq_hz=19199750"
after, surviving a reboot; DAB/FM tuning unaffected (DAB CNR 17-19dB,
locked).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The 2026-08-16 IBP=1 override (commit 6974095) was applied alongside a
separate, simultaneous fix to Si4684's PIN_CONFIG_ENABLE and credited
with turning static into audible music. SerialInputRegister (0x081F) is
a single register shared by every SDATA_INx pin on the ADAU1701, so the
override also applied to the ESP32 streaming input, not just Si4684's.
Live A/B testing today (DAB, FM, and ESP32 web-radio, all isolated via
mixer gain, with and without ADAU1701 DSP bypass, with and without BT
A2DP codec changes) narrowed the hiss to this one shared register.
Removing the override and leaving IBP at its compiled default (0x00)
resolved the hiss on both the Si4684 and ESP32 paths, confirmed by ear.
Also:
- Add a runtime HTTP API (GET/POST /api/bluetooth/a2dp-codec) to change
the BT1035 A2DP codec bitmask without reflashing, used to rule out
AAC/SBC codec choice as a contributing cause.
- Extend the ADAU1701 boot-time EQ diagnostic to read back all 6 bands
(previously band 0 only) using the correct 5.23 fixed-point format.
- Note EEPROM persistence for ANTCAP/crystal calibration as TODO.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Root cause of FM/DAB "stonata" audio: xtalCtun=31/nominal XTAL_FREQ
defaults were never measured against this board's actual crystal
(Abracon ABM8-19.200MHZ-10-1-U-T, CL=10pF, two external 15pF load
caps). Fixed via CTUN trim by ear (31->0) plus a new live calibration
loop that reads the Si4684's own FM_RSQ FREQOFF field (broadcast
carriers are GPS-locked, so it's a free precision frequency reference)
to trim XTAL_FREQ with no lab equipment. Converged to CTUN=0,
XTAL_FREQ=19199750 Hz, residual -3/-4 ppm cross-checked on two
stations.
New tools/infrastructure (kept, not one-off):
- Si4684Driver::recalibrateXtal() + POST /api/tuner/xtal-calibrate:
live crystal re-trim without an ESP32 reflash.
- FM_RSQ FREQOFF exposed as "freqoff_ppm" in GET /api/tuner/status.
- tools/si4684_xtal_calibration.py: automates the trim loop.
- tools/si4684_antenna_calibration.py: AN851 Appendix A ANTCAP/VARM/VARB
sweep tool (same session, separate calibration).
- CONFIG_ESP32_I2S_TEST_TONE (off by default): isolates Si4684-specific
audio issues from shared-downstream ones by writing a tone directly
over the I2S bus the Si4684 also uses.
- SIGMA_WRITE_REGISTER_BLOCK/sigma_safeload_block now retry on NACK and
verify via read-back instead of firing I2C writes blind.
- FM de-emphasis set to European 50us (was left at the US 75us default).
- DAB_ACF_ENABLE restored to its previous 0x0000 with a citation
explaining why (tested the datasheet default of 0x0003, made things
audibly worse).
See docs/si4684-rf-investigation-report.md's 2026-08-23 entry for the
full elimination chain and docs/TODO.md for follow-up work (persisting
calibration results to EEPROM instead of requiring a firmware edit).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
RESET# (pin 8) is no longer driven at all: reconfigured as a floating
input relying entirely on the module's own internal pull-up per
datasheet §4.8, as a diagnostic test to rule out host-side RESET# drive
as a contributor to intermittent boot failures.
SYS_CTRL (pin 34) now performs a genuine LOW(2.5s)->HIGH power-cycle on
every resetAndInitOnce() call rather than being asserted once ever:
previously every later retry from bt1035RetryTask silently reused an
already-HIGH SYS_CTRL line without ever actually power-cycling the
module.
Added read-only diagnostics on the CTS/RTS pins (physically wired,
named in board_pins.hpp since their original definition, never
configured by any driver code, host flow control disabled) to observe
their level around the boot-banner wait, after reviewing a sibling
project's PinScope report and re-reading the datasheet's UART flow
control and PA_MUTE default-function documentation.
Across ~45 minutes of live testing after these changes, zero successful
boots were observed - inconclusive on whether this improves anything,
but each change is independently correct per the datasheet. Escalated
to Feasycom support with the full findings. Documented in the RF
investigation report and TODO.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Git archaeology traced the boot sequence back to fd9d4ae (2026-08-15,
documented 5/5 clean boots), which removed a redundant AT+RESET and added
the boot-banner listen window in a single commit. Comparing that
validated design to today's working tree found one real structural
deviation: an intra-boot() retry loop (2 attempts, only 300ms between
hardware reset pulses) added earlier today, which never existed in the
validated baseline. The BT1035 datasheet's own Reset Protection timeout
(typically >1.8s) means a second pulse fired only 300ms later may not
reach a clean power-off state before repowering.
Removed the intra-boot() retry loop entirely (kBootAttempts,
kBootRetryDelayMs deleted) — boot() now makes exactly one attempt per
call, matching fd9d4ae. Retries remain exclusively at the
bt1035RetryTask level (whole clean boot() calls, confirmed live at
~31.8s apart). Banner wait (25s) and GPIO readback left untouched.
Documented the full commit-by-commit analysis and live test result
(structurally correct, hit-rate inconclusive on this sample) in the RF
investigation report and TODO for future sessions.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
BT1035 boot can fail with total UART silence even after the banner-timing
fix, on otherwise-identical, correctly-powered hardware. Confirmed via
multimeter (VBAT_IN, 1.8V_OUT, SYS_CTRL/RESET, TX all normal) and by
observing the same physical module both succeed and fail across different
boot attempts in one session, that this is intermittent, not a dead
module — the crystal is sealed inside the module and not inspectable or
fixable from our side.
Since the fault self-clears on a later attempt, mitigate with an
indefinite background retry task: if the initial boot() fails, keep
retrying with no artificial delay (each attempt already takes ~25-60s) so
a temporary failure becomes a bounded, self-recovering delay instead of
requiring a manual power cycle. Documented the full diagnostic session,
including the ruled-out theories and a possible future ESP32-S31 (native
Bluetooth Classic) migration path, in the RF investigation report.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Extend the FM-only ANTCAP antenna-varactor override to DAB, mirroring the
existing mechanism end to end (driver, tuner, service, EEPROM storage,
HTTP API). Live sweep on real hardware found no ANTCAP value beating
auto-tune on the ensembles tested, so DAB stays on auto-tune by default.
Also fix BT1035 boot: the module's real boot banner doesn't appear until
~18-24s after RESET# releases, not the 3.5s previously waited; add a
2-attempt retry and a baud-rate probe fallback for diagnostics.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ch-api.tex only covered a subset of the routes SetupWebServer.cpp
actually registers. Backfilled the ones that had grown undocumented
over the last several sessions, plus this session's three new ones:
- POST /api/wifi/scan (existed, undocumented)
- POST /api/tuner/scan, POST /api/tuner/scan/full (full FM band scan,
this session's item 1)
- POST /api/audio/beep, GET /api/dsp/params, PUT /api/dsp/param
(generic ADAU1701 parameter access, this session's item 4)
- PUT /api/stream/phone (phone PCM streaming, item 2, commit e8f79c4)
- GET/POST /api/streaming (web radio config, existed, undocumented)
- POST /api/bluetooth/scan, POST /api/bluetooth/connect,
GET/POST/DELETE /api/bluetooth/speaker, POST /api/bluetooth/reconnect
(existed, undocumented)
Also added a subsection under "Boot and network state machine"
covering BLE provisioning (commit 74c40ee) — it isn't an HTTP
endpoint so it doesn't fit the \apiendpoint table, but belongs next
to the SoftAP/STA state description it's additive to.
Verified: tools/check-manual-sync.py passes, and a full two-pass
xelatex build of the manual compiles clean (no undefined references,
no errors) with the new sections in place.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
readDabServiceData(): 6 of 7 response fields (dataSrc, serviceId,
componentId, byteCount, segmentIndex, segmentCount) read one byte too
early, using the old raw[4]=RESP4 convention instead of the correct
raw[5]=RESP4 (established elsewhere in this driver by getPartInfo() and
readDabDigRadStatus()'s own ficQuality/cnrDb fields). dataSrc landing on
the wrong byte meant the DAB dynamic label (PAD/now-playing text) check
(dataSrc == 2) could essentially never match — it has likely never worked.
Header buffer grown 24->25 bytes to fit the correctly-positioned last field.
fetchDabServiceList(): didn't match AN649 Table 14's "DAB/DMB Digital
Service List" layout at all — serviceCount read from the wrong byte, every
per-service field misaligned, componentId assumed 4 bytes wide (actually
2 per the spec), and only the first of a service's possibly-several
components was ever skipped past (desyncing every later entry). Rewrote
against the actual Table 14 field layout. Confirmed live yesterday this
was producing garbled service_id/component_id/label output
(component_id values decoding as literal ASCII spaces).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
readFmRds(), readDabDigRadStatus()'s acquired field, and
readDabEventStatus() all read raw[4] expecting AN649's RESP4 field, but
this driver's own established convention (getPartInfo(), and the
already-correct ficQuality/cnrDb fields in readDabDigRadStatus() itself)
is raw[5]=RESP4 (raw[0]=SPI lead-in, raw[1..4]=STATUS0-3). This is why
DAB_GET_EVENT_STATUS's serviceListReady never set — it was reading
STATUS3's ERRNR bit instead of RESP4's SVRLISTINT bit, so
/api/tuner/services returned service_list_empty forever regardless of lock
quality. Fixed all four sites; readFmRds()'s fifoUsed/blockA-D were
consequently also off by one and fixed together with it.
Confirmed live: first DAB ensemble locks in this project's history (3 found
sweeping freq_index 0-35, fic_quality=100, best CNR 20 dB on index 23), and
/api/tuner/services now returns real entries instead of service_list_empty.
The service-list entry contents themselves are still garbled (a third,
separate bug in fetchDabServiceList()'s body parsing, documented but not
fixed this session — see docs/si4684-rf-investigation-report.md).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
Two independent bugs silenced the digital audio path from Si4684 into the
ADAU1701 even after the FM/DAB tune fix produced a real RF lock:
1. Si4684Driver::configureAfterBoot() wrote PIN_CONFIG_ENABLE (0x0800) as
0x0003, enabling both I2SOUTEN and DACOUTEN. AN649: "only I2SOUTEN or
DACOUTEN can be enabled at a time. If both enabled, only analog audio
output is enabled" — the chip silently fell back to its unused analog
DAC output on every boot. Fixed to 0x8002 (I2SOUTEN + INTBOUTEN),
matching the value hitech95/si468x_dab_receiver's working ALSA codec
driver uses (SI468X_PROP_I2S_ENABLED); I2SOUTEN alone (0x0002) was not
sufficient on this hardware. Also fixed AUDIO_OUTPUT_CONFIG (0x0302),
which was being written with a stray I2S-enable bit that property does
not have (its only real field is bit0 MONO).
2. Even with the chip correctly outputting I2S, the ADAU1701 received only
static. Traced with SIGMA_WRITE_REGISTER_BLOCK live overrides of
SerialInputRegister (0x081F, baked into the compiled SigmaStudio export
at ILP=0/IBP=0): IBP=1 (input data clocked on the opposite BCLK edge)
produced real, recognizable music instead of static on a locked, strong
FM signal — first confirmed end-to-end audio in this project's history.
ILP=1 made it worse and was reverted; IBP=1 kept as a runtime override
in Adau1701Driver::boot().
Remaining noise on top of the music is attributed to antenna quality
(RSSI/SNR fluctuated significantly between retunes of the same station on
the current improvised antenna) — not yet confirmed with a proper antenna.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
writeCommand() had no way to send a non-zero ARG1, since it always
hardcoded ARG1=0x00 before the caller's payload. Every command whose real
ARG1 needed to carry a flag (STCACK, INTACK, SERTYPE, DIGRAD/EVENT ack) or
whose payload needed to start at ARG1 instead of ARG2 was silently broken:
- seekFm(): SEEKUP/WRAP never reached the chip (always ARG2=0x00), so
hardware seek always searched down/no-wrap; masked by the existing
100 kHz software-step fallback in Si4684Tuner.
- startDabService()/stopDabService(): SERVICE_ID/COMPONENT_ID shifted one
byte right of their real ARG4-11 positions, with SERTYPE landing where
the spec requires a fixed 0x00.
- readDabServiceData(): same shift, plus STATUS_ONLY was bit3 (0x08)
instead of the correct bit4 (0x10).
- clearFmStc(), readFmRsq(), readFmRds(), fetchDabServiceList(),
readDabDigRadStatus(), readDabEventStatus(): these AN649 commands have
only ARG1 and no ARG2 at all, so the old two-argument writeCommand()
could never carry their ack/status flags — clearFmStc()'s STCACK never
fired in this driver's history (masked by FM_TUNE_FREQ/FM_SEEK_START
auto-clearing STC per their own spec).
writeCommand() gains a fourth parameter, arg1 (default 0x00, preserving
every already-correct call site); each caller above now passes its flag
through arg1 instead of the payload array.
Confirmed live: first locked:true and first genuine hardware seek (not
software-fallback) in this driver's history — 87.5 -> 98.3 MHz, RSSI +12
dBuV, SNR +14 dB.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
writeCommand() always prepends a fixed ARG1=0x00 byte before the payload;
tuneFm()/tuneDab() built their argument arrays starting at what the author
believed was ARG1, so every byte landed one slot right of its real AN649
position and an extra unused byte was appended. The chip never received the
requested frequency. This is the root cause of the months-long total RF
blackout (RSQ frozen at all-zero on every frequency/ANTCAP value) previously
attributed to a QFN exposed-pad hardware defect — that hypothesis is now
overturned, confirmed live: RSSI/SNR now read real, frequency-dependent
values with zero STC timeouts after the fix.
Also make BT1035 boot failure non-fatal in HardwareBootstrap::boot() so a
companion-chip fault no longer halts the whole device (Si4684 tuning, web
UI, Wi-Fi already isolate BT1035 readiness via CompanionChipStatus).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
FM blob confirmed byte-perfect and reproduces the identical no-lock symptom
seen on DAB, strengthening the hardware-side hypothesis over firmware.
PCBWay closed the dispute without X-ray verification. Records the BT1035
AT-init root cause (software, not hardware) as a calibration note against
over-attributing intermittent symptoms to physical damage.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Si4684Driver::getPartInfo()/getSysState() existed but were never called, so
their byte-offset bugs never surfaced. Wired them into a boot-time diagnostic
log (part number, firmware revision, active image, streamed blob byte counts)
to check whether the loaded DAB/FM firmware images are genuine and intact, as
an alternative explanation to the QFN exposed-pad hardware hypothesis.
Fixed two rounds of off-by-one bugs found while doing this: the fields were
initially read one byte too far right (e.g. firmwareBuild was reading a flag
byte, not a version number); the first fix undershot in the other direction
by not accounting for readRaw()'s one-byte SPI lead-in before STATUS0 (already
documented and confirmed elsewhere in this file, in pollStc()) -- caught
because the "fixed" GET_SYS_STATE reported image=192 (0xC0), the exact
signature of STATUS3 with PUP_STATE=3 seen throughout this investigation.
All three response buffers were already sized for the lead-in byte, which
confirmed the correct fix.
Verdict, captured live: blob streamed bytes match local file sizes exactly (no
truncation), GET_SYS_STATE reports image=2 (DAB active, correct), GET_PART_INFO
reports part=4684 (matches expected Si4684 part number) with a plausible
firmware revision -- the loaded DAB firmware is genuine and intact. This closes
the last plausible firmware-side explanation for the FM/DAB no-lock symptom;
docs/si4684-rf-investigation-report.md and docs/TODO.md (P4/H5) updated with
the full record and verdict.
Also noted, not yet fixed: BT1035 AT-init now fails deterministically on every
boot (was a one-off earlier this session) -- see report's Open Items.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Add docs/si4684-rf-investigation-report.md: full record of the FM/DAB no-lock
investigation (crystal, front-end matching, ANTCAP sweep, continuity, leading
EP solder-defect hypothesis, PCBWay report sent) plus the separate audio
profile NVS bug found and partially fixed this session.
- Fix sigma_i2c_write() (SigmaStudioFW.c): no retry on I2C failure meant a single
transient NACK anywhere in a long safeload burst (EQ apply = ~55 sequential
transactions) aborted the whole sequence. Added a 3-attempt retry.
- Add granular failure logging (AudioService::applyProfileToDsp/persistProfile,
Adau1701Driver::applyMixer/applyEq, NvsAudioProfileStore::saveProfile error
codes) to isolate the remaining NVS-side audio profile save failure.
- Si4684Driver::tuneFm gains an optional ANTCAP argument (default 0 = unchanged
auto-tune behavior) used during this session's front-end matching sweep.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Streaming (main feature this session):
- New WebRadioConfig/WebRadioJson core types, ISecureStore-backed persistence
- New webradio::WebRadioService (thread-safe live config) + GET/POST /api/streaming
- web_radio_stream task now runtime-toggleable (no reboot), no hardcoded URL
- Content-Type diagnostic: warns clearly when a URL is a webpage, not an audio stream
Boot cleanup:
- Removed boot-time auto FM/DAB tune, auto-beep, and the (now-concluded) Si4684
crystal IBIAS/CTUN empirical sweep from main.cpp — tuning/beep are on-demand
via the existing REST API only
Web UI:
- Modernized styling (cards, gradients, toggle switches, light/dark theme)
- New Stream tab wired to /api/streaming
Fixes found via real idf.py build (not just clangd):
- Restored wrongly-removed si4684/Si4684Tuner.hpp include in main.cpp
- Fixed MP3Decode() argument types in web_radio_stream.cpp (unsigned char**/int*)
Quality-gate fixes:
- Host-test stub headers (esp_log.h, freertos/*) so TunerService.cpp's
scanForStation logging/pacing compiles for station_service_test /
integration_service_test instead of running stale binaries
- Added WifiScanner and WebRadioService manual sections; filled in missing
Doxygen docs on BluetoothService, i2s_sdata_probe, test_firmware, Bt1035At
- Ignore clangd's .cache/ index directory
Also includes prior uncommitted work carried in the tree: Wi-Fi/Bluetooth
device scan REST API and UI (WifiScanner, BT scan), SigmaStudio TCP bridge,
and the current ADAU1701 SigmaStudio DSP program export.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Initialise NVS before integration startup, recover from encrypted-partition mismatches without re-enabling encryption, and improve provisioning logs and POST body handling.
Co-authored-by: Cursor <cursoragent@cursor.com>
Refresh BOM (2026-07-09 CSV), Gerbers, EasyEDA project, pick-and-place, and schematic export; document corrected ADAU crystal/PLL strapping and Si4684 reference clock in the manual; add PCBWay acknowledgement on the back cover only.
Co-authored-by: Cursor <cursoragent@cursor.com>
Add wrapping table columns, breakable paths, and ragged callout boxes in digiradio-manual.sty, then reflow long endpoint headings, JSON examples, and hardware/driver tables to stay within page margins.
Co-authored-by: Cursor <cursoragent@cursor.com>
Add gitignore rules for aux, log, toc, fls, fdb_latexmk, listing, out, and pdf so only source .tex/.sty stay in version control.
Co-authored-by: Cursor <cursoragent@cursor.com>
Switch BT1035 bring-up from Line-In to I2S slave (AT+AUXCFG=3, AT+I2SCFG=67) to match the ADAU1701 PCM routing, confirm 2 kΩ I2C pull-ups on R1/R16, and sync firmware docs, AGENTS rules, and the DATASHEET bundle.
Co-authored-by: Cursor <cursoragent@cursor.com>
Rename conflicting TikZ step style to drstep, add missing ch:firmware label, and use TeX Gyre Heros font fallback instead of Linux Biolinum O.
Co-authored-by: Cursor <cursoragent@cursor.com>
Align README, manual, and backlog to 0.8.4; add Web UI System tab for OTA/DSP uploads, serial in health header, FM seek down, and BT1035 paired list plus auto-reconnect API.
Co-authored-by: Cursor <cursoragent@cursor.com>
Stream application binaries to the inactive OTA slot via POST /api/system/ota,
validate the esp_app_desc project name in core, and cancel rollback after a
healthy network boot through OtaService::confirmBoot().
Co-authored-by: Cursor <cursoragent@cursor.com>
Decouple the SigmaStudio RAM download from compiled-in adau1701_program.c:
DRAD v1 blobs in the dsp partition with embedded fallback, POST /api/dsp/program,
and host-tested blob parse/serialize helpers.
Co-authored-by: Cursor <cursoragent@cursor.com>
Read the factory 24AA025E48 serial after ADAU I2C boot, derive SoftAP SSID, BT name, STA hostname, and expose serialNumber on GET /api/health with graceful fallbacks.
Co-authored-by: Cursor <cursoragent@cursor.com>
Replace factory with ota_0/ota_1, otadata, and a dsp data partition on 4 MB flash; enable bootloader app rollback for future OTA work.
Co-authored-by: Cursor <cursoragent@cursor.com>
Enable GPIO_PULLDOWN_ENABLE during gpio_config so RSTB cannot glitch high before gpio_set_level(0), and add manual validation notes explaining why the internal pull-down complements the external one.
Co-authored-by: Cursor <cursoragent@cursor.com>
Update READMEs, manual chapters, agent guides, CONTRIBUTING, and TODO to reflect T1–T8 done, encrypted NVS, CI gates, and pending HIL checklist.
Co-authored-by: Cursor <cursoragent@cursor.com>
Add initEncryptedStorage, development-mode Kconfig defaults, production overlay, and security HIL docs; wire NetBootstrap through encrypted NVS bring-up.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expand local-only firmware README, add check_si4684_blobs.py to verify gitignore and clean history, and gate main with a new si4684-blobs workflow job.
Co-authored-by: Cursor <cursoragent@cursor.com>
Add now-playing view with metadata polling, six-band EQ controls, full REST coverage, companion-chip badges, and gzip-www helper for the embedded setup page.
Co-authored-by: Cursor <cursoragent@cursor.com>
Replace the services stub with IntegrationService for boot preset recall and tune orchestration, persist last preset in NVS, and remove invalid @return tags that broke CI on T4 metadata headers.
Co-authored-by: Cursor <cursoragent@cursor.com>
Ship station reorder, DAB playing ids in presets, RDS PS/RT and DAB DLS in tuner status, Si4684 data-service read, host tests, and UI now-playing lines.
Co-authored-by: Cursor <cursoragent@cursor.com>
Clear doc-block warnings so doxygen exits 0, add GitHub Actions
for host tests, Doxygen, and manual sync, and document CI in the manual.
Co-authored-by: Cursor <cursoragent@cursor.com>
Adopt the prioritised task list for the coding agent and document
fw 0.7.0 status plus the full HTTP API in Software/README.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose discoverable mode and A2DP control over REST, add persisted
DAB/FM preset list with web UI, and document gaps in docs/TODO.md.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose Si4684, ADAU1701, and BT1035 boot flags via CompanionChipStatus after
HardwareBootstrap; update API manual schema for Slice 8.
Co-authored-by: Cursor <cursoragent@cursor.com>
Implement Bt1035Driver AT init (AT+AUXCFG=1), core AT parser with host tests,
wire boot into HardwareBootstrap, and document DAB/FM tuning workflows in ch-si4684.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose POST /api/audio/stereo-enhance and bass-enhance with 0–100 levels,
persist enhancements in AudioProfile, and document the virtual EQ mapping in
the manual and SigmaStudio chapter.
Co-authored-by: Cursor <cursoragent@cursor.com>
Document the ADAU1701 schematic chain (sigma-chain.jpg), cross-link from
hardware/firmware chapters, skip safeload on fixed high-pass band 0, and
match EqProfile default peaking frequencies to SigmaStudio.
Co-authored-by: Cursor <cursoragent@cursor.com>
Safeload mixer/EQ/master on the ADAU1701, persist AudioProfile in NVS,
expose /api/audio routes and web UI controls, with host tests and manual sync.
Co-authored-by: Cursor <cursoragent@cursor.com>
micheleandClaude Sonnet 5