micheleandClaude Sonnet 5
9ca180a787
New hardware/v3/sim/tb_np_packed_layer_reuse.v: real SDR SDRAM -> layer_prefetch_ctrl.v -> layer_weight_buffer.v -> weight_tile_gather.v -> neural_processor_packed.v, ALL real synthesizable RTL (unlike EXP-0058, which still had a testbench-only gather step). First run: 15/16 PASS, 1 FAIL. Root-caused (not re-run away): a testbench handshake bug, not a DUT bug -- operand_valid was held one extra clock edge after each accepted tile, double-consuming stale data every tile on every pair. 15 of 16 "passed" only because this test's saturating outputs happened to clamp to the same value whether or not the accumulator was inflated -- disclosed as a real methodology risk, not swept under the rug. Fixed by dropping operand_valid the same delta the handshake is observed. Re-verified after the fix: 16/16 PASS, 0 errors, bit-exact against an independent golden model, through the complete real RTL path. Full writeup in hardware/v2/logs/experiments.log EXP-0062. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MUG92aM9m68TRc4rG55BcC
Formato dei log V2
Regola non negoziabile (docs/v2-description.md §25-29): ogni attività
significativa (modifica, simulazione, sintesi, benchmark, decisione, errore)
deve essere registrata. Nessun log viene mai sovrascritto o troncato — solo
append. Nessun ID esperimento (EXP-XXXX) o decisione (DEC-XXXX) viene mai
riutilizzato, anche se il risultato è un FAIL.
File
development.log— log principale di sviluppo, un'entry per ogni sessione di lavoro/milestone (creazione file, refactor, avanzamento roadmap).architecture.log— decisioni e note di architettura a grana fine (non scelte finali — quelle vanno indecisions.log— ma esplorazioni, alternative considerate, vincoli scoperti).simulation.log— ogni run di simulazione (Icarus/Verilator): test, vettori, cicli, PASS/FAIL, confronto bit-exact con V1, stall/memory-wait.synthesis.log— ogni run Yosys: LUT/FF/DSP/BRAM, warning, problemi CHECK.timing.log— ogni run nextpnr-ecp5: Fmax, percorso critico, WNS/TNS se disponibili. Fmax "ufficiale" di una configurazione = solo da qui, mai da simulazione o stima.benchmark.log— tabelle di confronto per configurazione (Fmax, MAC/cycle, cycles/neuron, utilization, ecc.), sempre con etichetta THEORETICAL/SIMULATED/SYNTHESIZED/POST-P&R.decisions.log— decisioni architetturali importanti, formatoDEC-XXXX(vedidocs/v2-description.md§27).experiments.log— registro principale, unEXP-XXXXper ogni esperimento end-to-end (config → sim/synth/timing → risultato), rimanda areports/experiments/EXP-XXXX/.errors.log— errori/bug/regressioni incontrati durante lo sviluppo V2 stesso (non i bug V1, già chiusi inhardware/v1/docs/validation/bugs.md).
Campi minimi per entry (§26)
timestamp, experiment_id (se applicabile), git_commit, session/agent,
module, configuration, action, reason, command, result, errors, decision,
next_action
Per synthesis/timing aggiungere: LUT, FF, DSP, BRAM, Fmax, critical path, WNS/TNS. Per simulazione: test, vectors, cycles, PASS/FAIL, bit-exact result, stall cycles, memory wait, utilization.