micheleandClaude Sonnet 5
77baa8fc16
dataflow_core.v integrates dependency_manager (M6) -> neural_director (M5) -> N_SLOTS x (memory_manager (M4) + neural_processor (M1)) for the first time. A slot's completion (via neural_director's new slot_node_id tracking, an additive port) feeds back as a producer_done event to dependency_manager, waking up any node that depended on it - closing the dataflow loop without external glue. Verified end-to-end (Verilator) on a 3-node DAG: two independent nodes plus a third depending on both, confirmed to dispatch only after both genuinely complete via real neural_processor computation. 4/4 PASS. Real synthesis + nextpnr-ecp5 P&R via a synthesis-only timing harness (bare per-slot backend ports exceed the LFE5U-45F's TRELLIS_IO budget, same pattern as ERR-0005): N_SLOTS=2 -> 165.15 MHz, N_SLOTS=4 -> 133.19 MHz, both PASS at 80MHz, 0 synthesis problems. Scope explicitly deferred to M8 (DEC-0009): M3's BRAM buffers not wired in yet, per-slot Memory Backend Interface ports not arbitrated to one shared PSRAM master yet - both need real measured data before committing to a design, not guessed at here. Logged: simulation/synthesis/timing/benchmark/decisions (DEC-0009)/ experiments (EXP-0008)/errors (ERR-0007, a Yosys chparam-ordering build quirk, not an RTL bug)/development.log, ROADMAP.md updated. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_013xXuuRUWZScuo1DeYJxs3v
Formato dei log V2
Regola non negoziabile (docs/v2-description.md §25-29): ogni attività
significativa (modifica, simulazione, sintesi, benchmark, decisione, errore)
deve essere registrata. Nessun log viene mai sovrascritto o troncato — solo
append. Nessun ID esperimento (EXP-XXXX) o decisione (DEC-XXXX) viene mai
riutilizzato, anche se il risultato è un FAIL.
File
development.log— log principale di sviluppo, un'entry per ogni sessione di lavoro/milestone (creazione file, refactor, avanzamento roadmap).architecture.log— decisioni e note di architettura a grana fine (non scelte finali — quelle vanno indecisions.log— ma esplorazioni, alternative considerate, vincoli scoperti).simulation.log— ogni run di simulazione (Icarus/Verilator): test, vettori, cicli, PASS/FAIL, confronto bit-exact con V1, stall/memory-wait.synthesis.log— ogni run Yosys: LUT/FF/DSP/BRAM, warning, problemi CHECK.timing.log— ogni run nextpnr-ecp5: Fmax, percorso critico, WNS/TNS se disponibili. Fmax "ufficiale" di una configurazione = solo da qui, mai da simulazione o stima.benchmark.log— tabelle di confronto per configurazione (Fmax, MAC/cycle, cycles/neuron, utilization, ecc.), sempre con etichetta THEORETICAL/SIMULATED/SYNTHESIZED/POST-P&R.decisions.log— decisioni architetturali importanti, formatoDEC-XXXX(vedidocs/v2-description.md§27).experiments.log— registro principale, unEXP-XXXXper ogni esperimento end-to-end (config → sim/synth/timing → risultato), rimanda areports/experiments/EXP-XXXX/.errors.log— errori/bug/regressioni incontrati durante lo sviluppo V2 stesso (non i bug V1, già chiusi inhardware/v1/docs/validation/bugs.md).
Campi minimi per entry (§26)
timestamp, experiment_id (se applicabile), git_commit, session/agent,
module, configuration, action, reason, command, result, errors, decision,
next_action
Per synthesis/timing aggiungere: LUT, FF, DSP, BRAM, Fmax, critical path, WNS/TNS. Per simulazione: test, vectors, cycles, PASS/FAIL, bit-exact result, stall cycles, memory wait, utilization.