micheleandClaude Sonnet 5
5f0d7f101c
Implements M3: three parametric dual-port buffers for the §12 data-plane (Input/Weight/Result), reusing the proven BRAM-inference idiom from the frozen hardware/v1/rtl/act_buffer.v (synchronous write, synchronous REGISTERED read, no reset on the read register -- keeps Yosys off the LUT-RAM path). Verified with Verilator: 10/10 tests pass (write-then-read correctness, extreme INT8 round-tripping, weight_buffer's full 64-bit tile width round-tripping, undisturbed re-reads). Real synthesis at two depths per module (6 configs total): 0 CHECK problems, every configuration correctly infers DP16KD (never LUT-RAM). Non-obvious real finding: weight_buffer's BRAM cost is driven by its P_IN*DATA_WIDTH tile width, not its DEPTH -- an 8x depth reduction (512->64) left DP16KD usage unchanged at 2, while activation_buffer/result_buffer (byte-wide) scale as naively expected (2->1). All default-depth configs PASS at 80MHz with large margin (287-367 MHz) via real nextpnr-ecp5 place&route. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_013xXuuRUWZScuo1DeYJxs3v
Formato dei log V2
Regola non negoziabile (docs/v2-description.md §25-29): ogni attività
significativa (modifica, simulazione, sintesi, benchmark, decisione, errore)
deve essere registrata. Nessun log viene mai sovrascritto o troncato — solo
append. Nessun ID esperimento (EXP-XXXX) o decisione (DEC-XXXX) viene mai
riutilizzato, anche se il risultato è un FAIL.
File
development.log— log principale di sviluppo, un'entry per ogni sessione di lavoro/milestone (creazione file, refactor, avanzamento roadmap).architecture.log— decisioni e note di architettura a grana fine (non scelte finali — quelle vanno indecisions.log— ma esplorazioni, alternative considerate, vincoli scoperti).simulation.log— ogni run di simulazione (Icarus/Verilator): test, vettori, cicli, PASS/FAIL, confronto bit-exact con V1, stall/memory-wait.synthesis.log— ogni run Yosys: LUT/FF/DSP/BRAM, warning, problemi CHECK.timing.log— ogni run nextpnr-ecp5: Fmax, percorso critico, WNS/TNS se disponibili. Fmax "ufficiale" di una configurazione = solo da qui, mai da simulazione o stima.benchmark.log— tabelle di confronto per configurazione (Fmax, MAC/cycle, cycles/neuron, utilization, ecc.), sempre con etichetta THEORETICAL/SIMULATED/SYNTHESIZED/POST-P&R.decisions.log— decisioni architetturali importanti, formatoDEC-XXXX(vedidocs/v2-description.md§27).experiments.log— registro principale, unEXP-XXXXper ogni esperimento end-to-end (config → sim/synth/timing → risultato), rimanda areports/experiments/EXP-XXXX/.errors.log— errori/bug/regressioni incontrati durante lo sviluppo V2 stesso (non i bug V1, già chiusi inhardware/v1/docs/validation/bugs.md).
Campi minimi per entry (§26)
timestamp, experiment_id (se applicabile), git_commit, session/agent,
module, configuration, action, reason, command, result, errors, decision,
next_action
Per synthesis/timing aggiungere: LUT, FF, DSP, BRAM, Fmax, critical path, WNS/TNS. Per simulazione: test, vectors, cycles, PASS/FAIL, bit-exact result, stall cycles, memory wait, utilization.