Bumps ADDR_WIDTH's default from 22 to 23 bits across every RTL
module (neuron_memory, layer_sequencer, spi_engine, spi_neuron_top,
mem_arbiter, int8_memory_access, memory_interface, psram_controller,
memory_model) and every testbench that mirrors it, so the system's
byte-address space reaches the full 8 MiB the recommended PSRAM part
(ISSI IS66WVE4M16EBLL-70BLI, docs/FPGA-Neural-Hardware-Design.md §3)
actually provides -- previously only 4 MiB (half the chip) was
reachable, since int8_memory_access.v's byte->word address shift
(addr >> 1) turned the old 22-bit byte address into only 21 real word
bits, one short of the chip's real 22-bit word address (A0-A21). At
23 bits, that same shift lands exactly on all 22 chip address lines,
so the whole part is usable now instead of deferred to a future
widening.
Also fixes a stray 22'd11-sized literal in layer_sequencer.v's
descriptor-table address increment (numerically already safe via
Verilog's zero-extension, but now correctly unsized so it always
matches ADDR_WIDTH instead of silently assuming 22).
Updated docs/FPGA-NeuralNetwork-Engine.md's SPI protocol address-field
note (23 bits, top 1 reserved bit instead of 2) and
docs/FPGA-Neural-Hardware-Design.md's PSRAM section (the "chip has
one spare address line" framing is gone now that all 22 are wired
and used).
Full regression (all 11 ADDR_WIDTH-touching testbenches, plus a
Yosys elaboration check of spi_neuron_top with the new default and
no override) passes clean.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WQV3vS9TXaGDJ5cRfnfidt
neuron_memory.v only handled a single neuron. Added an N_NEURONS
parameter (default 1, fully backward compatible) and a memory-bound
neuron loop: X is read once (shared layer input), and for each
neuron in turn W and bias are re-read from PSRAM and fed to a
single, reused neuron_parallel instance -- no change to the
validated compute datapath (neuron_parallel/mac8/mac_unit).
Addressing follows layer.v's neuron-major convention: neuron n's
weights live at w_base + n*N_INPUTS bytes, its bias at
bias_addr + n. Output changed from a single `y` port to a packed
`y_bus` (DATA_WIDTH*N_NEURONS bits, neuron-major), matching
layer.v's y_bus.
- rtl/neuron_memory.v: N_NEURONS parameter, neuron_index/
w_group_base/bias_group_addr tracking, y_reg[] array assembled
into y_bus, STATE_WAIT_N now loops back to STATE_READ_W for the
next neuron instead of finishing after one.
- sim/neuron_memory_tb.v: updated to the new y_bus port
(N_NEURONS=1 explicit); all 5 existing tests still pass unchanged,
confirming backward compatibility.
- sim/neuron_memory_multi_tb.v: new end-to-end test (full
memory_interface + psram_controller + psram_model stack) with
N_NEURONS=3, validating per-neuron addressing and a single done
pulse at the end of the sequence (scale, larger value, ReLU).
- Full regression re-run: all existing testbenches still pass.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WQV3vS9TXaGDJ5cRfnfidt
micheleandClaude Sonnet 5