RESET# (pin 8) is no longer driven at all: reconfigured as a floating
input relying entirely on the module's own internal pull-up per
datasheet §4.8, as a diagnostic test to rule out host-side RESET# drive
as a contributor to intermittent boot failures.
SYS_CTRL (pin 34) now performs a genuine LOW(2.5s)->HIGH power-cycle on
every resetAndInitOnce() call rather than being asserted once ever:
previously every later retry from bt1035RetryTask silently reused an
already-HIGH SYS_CTRL line without ever actually power-cycling the
module.
Added read-only diagnostics on the CTS/RTS pins (physically wired,
named in board_pins.hpp since their original definition, never
configured by any driver code, host flow control disabled) to observe
their level around the boot-banner wait, after reviewing a sibling
project's PinScope report and re-reading the datasheet's UART flow
control and PA_MUTE default-function documentation.
Across ~45 minutes of live testing after these changes, zero successful
boots were observed - inconclusive on whether this improves anything,
but each change is independently correct per the datasheet. Escalated
to Feasycom support with the full findings. Documented in the RF
investigation report and TODO.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
BT1035 boot can fail with total UART silence even after the banner-timing
fix, on otherwise-identical, correctly-powered hardware. Confirmed via
multimeter (VBAT_IN, 1.8V_OUT, SYS_CTRL/RESET, TX all normal) and by
observing the same physical module both succeed and fail across different
boot attempts in one session, that this is intermittent, not a dead
module — the crystal is sealed inside the module and not inspectable or
fixable from our side.
Since the fault self-clears on a later attempt, mitigate with an
indefinite background retry task: if the initial boot() fails, keep
retrying with no artificial delay (each attempt already takes ~25-60s) so
a temporary failure becomes a bounded, self-recovering delay instead of
requiring a manual power cycle. Documented the full diagnostic session,
including the ruled-out theories and a possible future ESP32-S31 (native
Bluetooth Classic) migration path, in the RF investigation report.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Extend the FM-only ANTCAP antenna-varactor override to DAB, mirroring the
existing mechanism end to end (driver, tuner, service, EEPROM storage,
HTTP API). Live sweep on real hardware found no ANTCAP value beating
auto-tune on the ensembles tested, so DAB stays on auto-tune by default.
Also fix BT1035 boot: the module's real boot banner doesn't appear until
~18-24s after RESET# releases, not the 3.5s previously waited; add a
2-attempt retry and a baud-rate probe fallback for diagnostics.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
writeCommand() always prepends a fixed ARG1=0x00 byte before the payload;
tuneFm()/tuneDab() built their argument arrays starting at what the author
believed was ARG1, so every byte landed one slot right of its real AN649
position and an extra unused byte was appended. The chip never received the
requested frequency. This is the root cause of the months-long total RF
blackout (RSQ frozen at all-zero on every frequency/ANTCAP value) previously
attributed to a QFN exposed-pad hardware defect — that hypothesis is now
overturned, confirmed live: RSSI/SNR now read real, frequency-dependent
values with zero STC timeouts after the fix.
Also make BT1035 boot failure non-fatal in HardwareBootstrap::boot() so a
companion-chip fault no longer halts the whole device (Si4684 tuning, web
UI, Wi-Fi already isolate BT1035 readiness via CompanionChipStatus).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
Streaming (main feature this session):
- New WebRadioConfig/WebRadioJson core types, ISecureStore-backed persistence
- New webradio::WebRadioService (thread-safe live config) + GET/POST /api/streaming
- web_radio_stream task now runtime-toggleable (no reboot), no hardcoded URL
- Content-Type diagnostic: warns clearly when a URL is a webpage, not an audio stream
Boot cleanup:
- Removed boot-time auto FM/DAB tune, auto-beep, and the (now-concluded) Si4684
crystal IBIAS/CTUN empirical sweep from main.cpp — tuning/beep are on-demand
via the existing REST API only
Web UI:
- Modernized styling (cards, gradients, toggle switches, light/dark theme)
- New Stream tab wired to /api/streaming
Fixes found via real idf.py build (not just clangd):
- Restored wrongly-removed si4684/Si4684Tuner.hpp include in main.cpp
- Fixed MP3Decode() argument types in web_radio_stream.cpp (unsigned char**/int*)
Quality-gate fixes:
- Host-test stub headers (esp_log.h, freertos/*) so TunerService.cpp's
scanForStation logging/pacing compiles for station_service_test /
integration_service_test instead of running stale binaries
- Added WifiScanner and WebRadioService manual sections; filled in missing
Doxygen docs on BluetoothService, i2s_sdata_probe, test_firmware, Bt1035At
- Ignore clangd's .cache/ index directory
Also includes prior uncommitted work carried in the tree: Wi-Fi/Bluetooth
device scan REST API and UI (WifiScanner, BT scan), SigmaStudio TCP bridge,
and the current ADAU1701 SigmaStudio DSP program export.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Align README, manual, and backlog to 0.8.4; add Web UI System tab for OTA/DSP uploads, serial in health header, FM seek down, and BT1035 paired list plus auto-reconnect API.
Co-authored-by: Cursor <cursoragent@cursor.com>
Decouple the SigmaStudio RAM download from compiled-in adau1701_program.c:
DRAD v1 blobs in the dsp partition with embedded fallback, POST /api/dsp/program,
and host-tested blob parse/serialize helpers.
Co-authored-by: Cursor <cursoragent@cursor.com>
Read the factory 24AA025E48 serial after ADAU I2C boot, derive SoftAP SSID, BT name, STA hostname, and expose serialNumber on GET /api/health with graceful fallbacks.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose discoverable mode and A2DP control over REST, add persisted
DAB/FM preset list with web UI, and document gaps in docs/TODO.md.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose Si4684, ADAU1701, and BT1035 boot flags via CompanionChipStatus after
HardwareBootstrap; update API manual schema for Slice 8.
Co-authored-by: Cursor <cursoragent@cursor.com>
Implement Bt1035Driver AT init (AT+AUXCFG=1), core AT parser with host tests,
wire boot into HardwareBootstrap, and document DAB/FM tuning workflows in ch-si4684.
Co-authored-by: Cursor <cursoragent@cursor.com>
Safeload mixer/EQ/master on the ADAU1701, persist AudioProfile in NVS,
expose /api/audio routes and web UI controls, with host tests and manual sync.
Co-authored-by: Cursor <cursoragent@cursor.com>
micheleandClaude Sonnet 5