Files
periscope/standards/protocol-specs/INDEX.md
T
michele bb83f63114 HDMI 2.0+ TI layout uses source_type VENDOR (2.82.0).
Add VENDOR to SourceType. HDMI 2.0/FRL fill TMDS1204 PCB numbers as VENDOR RECOMMENDED; TMDS1204-specific skew/vias/data_rate/SIGDET stay PHY_DEPENDENT. HDMI 1.4 TMDS remains UNKNOWN. Not HDMI Forum STANDARD.
2026-09-22 18:25:26 +02:00

26 lines
3.0 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Protocol specification archive
PDFs live **on disk** in this folder. They are **not** committed to GitHub/Gitea (license). See `.gitignore` `standards/protocol-specs/*.pdf`.
Mirror: agent-store `internal/protocol-specs/`.
TI files are **source_type VENDOR**, never HDMI Forum STANDARD. `https://pcbsync.com/hdmi-pcb-layout/` is a blog — **not packed**.
| Filename | Title | Revision | Cited by (physical / notes) | Class |
|---|---|---|---|---|
| `usb_20.pdf` | Universal Serial Bus Specification | Revision 2.0, April 27, 2000 | `usb2-ls-dpair`, `usb2-fs-dpair`, `usb2-hs-dpair` (data_rate, pull-up/down, VBUS, cable Z0, HS PCB *should*) | STANDARD |
| `USB_2.0_Electrical_Compliance_Test_Spec.pdf` | USB 2.0 Electrical Compliance Test Specification | Version 1.08, April 2026 | `usb2-hs-dpair` DCR 17/23/13 Ω, HS edges | STANDARD |
| `USB Type-C Spec R2.5 - March 2026.pdf` | USB Type-C Cable and Connector Specification | Release 2.5, March 2026 | `usb-c-receptacle` Rp/Rd/Ra, charger VBUS Fig 4-39, zOPEN, tCCDebounce, tVBUSON | STANDARD |
| `USB Type-C Spec R2.0 - August 2019.pdf` | USB Type-C Cable and Connector Specification | Release 2.0, August 2019 | `usb-c-receptacle` Source CC shall-detect Table 4-32 (vRd/vOPEN/vRa) | STANDARD |
| `USB_Type-C_Functional_Test_Spec.pdf` | USB Type-C Functional Test Specification Chapters 4 and 5 | Revision 0.91, March 3, 2024 | `usb-c-receptacle` cable IR drop 250/500 mV OPTIONAL CABLE | STANDARD (OPTIONAL CABLE) |
| `DVI_Specification_Revision_1.0.pdf` | Digital Visual Interface (DVI) | Revision 1.0, 02 April 1999 | `dvi-1.0-tmds` termination / Zdiff | STANDARD |
| `802.3-2012_section2.pdf` | IEEE Std 802.3-2012 IEEE Standard for Ethernet (Section Two) | 2012 | `100base-tx-mdi`, `100base-fx-pcb` | STANDARD |
| `802.3-2015_SECTION1.pdf` | IEEE Std 802.3-2015 IEEE Standard for Ethernet (Section One) | 2015 | `10base-t-mdi` Clause 14 | STANDARD |
| `802.3-2012_section3.pdf` | IEEE Std 802.3-2012 IEEE Standard for Ethernet (Section Three) | 2012 | `1000base-t-mdi` Clause 40; `1000base-x-pcb` Clause 36 | STANDARD |
| `CEC_HDMI_Specification.pdf` | High-Definition Multimedia Interface Specification | Version 1.3, June 22, 2006 | HDMI `cec*` fields (Supplement 1 + Table 4-27). **Not** used for TMDS/FRL Zdiff | STANDARD (CEC only) |
| `tmds1204.pdf` | TMDS1204 12Gbps HDMI Hybrid Redriver | SLLSF57A August 2022 / revised April 2024 | `tmds1204-hdmi-sink`, `tmds1204-hdmi-source`; HDMI **2.0 / FRL** common layout `source_type=VENDOR` | **VENDOR** |
| `slla633.pdf` | TMDS_CLOCK/FRL_Data Detection Design in HDMI Sink Applications TMDS1204 | SLLA633 May 2024 | HDMI 2.0+/`tmds1204-*` `sigdet_wakeup` PHY_DEPENDENT (no layout ohms) | **VENDOR** |
| `HDMI-FRL-Software-Datasheet-61W6169600.pdf` | HDMI 2.1 FRL Compliance Test Solution Datasheet (Tektronix) | (on file; 4 pages) | **not packed** — test-equipment datasheet, not HDMI Forum Adopter | archived only |
Duplicates on Desktop (same MD5, not stored twice here): `USB2_Electrical_Compliance.pdf`, `DVI_Spec_v1.0.pdf`, `USB_TypeC_Functional_Test.pdf`.