Found a real, previously-masked bug in spi_host_bridge_v3.v's physical
layer (inherited unchanged from V1/V2): the bit_count==0 MISO bypass
corrupts the last bit of any multi-byte response whose value happens
to end in a 1 -- every prior test's response data coincidentally
ended in 0, hiding it until the new DEVICE_ID register (0x...01)
exposed it via a real bit-exact mismatch. Fixed by removing the
bypass (verified unnecessary for this protocol's actual usage).
Added REG_WRITE/REG_READ opcodes (0x30/0x31) and a register file
(DEVICE_ID/CONTROL/STATUS/N_SLOTS) for general device control beyond
job submission, per explicit user request. Full regression: 38/38
PASS, including new cases specifically targeting the bit-corruption
bug for both REG_READ and READ_MEM.
New hardware/v3/constraints/n2_system_ddr3_top.xdc: reserves the
FPGA's dedicated Master-SPI config-flash pins (found colliding with
auto-placed design ports in the real routed checkpoint) and assigns
the neural-processor management SPI to real, verified-free, edge-
adjacent pins on xc7a100tcsg324-2.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MUG92aM9m68TRc4rG55BcC
micheleandClaude Sonnet 5
ca17765fe3