micheleandClaude Sonnet 5
3cdaeaee35
Post-M10, user-requested final benchmark campaign: 6 realistic workloads (16-256 independent neurons in a shared-input dense-layer shape, a random-seeded 2-layer network with real cross-node PSRAM forwarding, and a 6-node 2-hop dependency diamond) x 4 concurrency levels (N_SLOTS=1/2/4/8) through the real, full neural_multiprocessor system (real V1 PSRAM chain, real slot_mem_arbiter). 24/24 runs PASS bit-exact against a software golden model (11,520 individual neuron/ node checks, zero mismatches). Three real bugs found and fixed during the campaign itself (ERR-0009): 1. neural_director.v (M5) had a real RTL bug at N_SLOTS=1 ($clog2(1)=0 makes a replication expression illegal) - never caught because M5-M10 only ever tested N_SLOTS=2/4/8. Fixed with a width-agnostic '0 literal; M5's own testbench re-verified unaffected. 2/3. Two testbench sizing bugs in tb_benchmark_suite.v itself (psram_model DEPTH too small for the Large workload's address range; N_NODES too small for the Stress workload's node-id range, causing a real deadlock via node-id wraparound colliding with an already-DISPATCHED node - a real, honest consequence of DEC-0008's own "no node-slot reclamation" design choice). Headline finding: real parallel scaling is essentially flat beyond N_SLOTS=2 - the single shared PSRAM port saturates at ~91% utilization regardless of slot count, so memory-bound workloads gain only 1.05-1.06x real speedup from N=1 to N=8. Once real POST-P&R Fmax degradation is also factored in, N_SLOTS=4 is measurably 21% SLOWER in real wall-clock time than N_SLOTS=1 for the largest workload tested. N_SLOTS=2 is recommended as the default (DEC-0014, superseding DEC-0012's resource-only "N_SLOTS=8 ceiling" framing for general use). Full 21-section report (every number classified THEORETICAL/ SIMULATED/POST-P&R MEASURED/DERIVED, per the user's own methodology requirements): hardware/v2/docs/benchmarks/ final-benchmark.md Logged: simulation/synthesis/timing/benchmark/decisions (DEC-0014)/ experiments (EXP-0014)/errors (ERR-0009)/development.log, ROADMAP.md updated. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_013xXuuRUWZScuo1DeYJxs3v
Formato dei log V2
Regola non negoziabile (docs/v2-description.md §25-29): ogni attività
significativa (modifica, simulazione, sintesi, benchmark, decisione, errore)
deve essere registrata. Nessun log viene mai sovrascritto o troncato — solo
append. Nessun ID esperimento (EXP-XXXX) o decisione (DEC-XXXX) viene mai
riutilizzato, anche se il risultato è un FAIL.
File
development.log— log principale di sviluppo, un'entry per ogni sessione di lavoro/milestone (creazione file, refactor, avanzamento roadmap).architecture.log— decisioni e note di architettura a grana fine (non scelte finali — quelle vanno indecisions.log— ma esplorazioni, alternative considerate, vincoli scoperti).simulation.log— ogni run di simulazione (Icarus/Verilator): test, vettori, cicli, PASS/FAIL, confronto bit-exact con V1, stall/memory-wait.synthesis.log— ogni run Yosys: LUT/FF/DSP/BRAM, warning, problemi CHECK.timing.log— ogni run nextpnr-ecp5: Fmax, percorso critico, WNS/TNS se disponibili. Fmax "ufficiale" di una configurazione = solo da qui, mai da simulazione o stima.benchmark.log— tabelle di confronto per configurazione (Fmax, MAC/cycle, cycles/neuron, utilization, ecc.), sempre con etichetta THEORETICAL/SIMULATED/SYNTHESIZED/POST-P&R.decisions.log— decisioni architetturali importanti, formatoDEC-XXXX(vedidocs/v2-description.md§27).experiments.log— registro principale, unEXP-XXXXper ogni esperimento end-to-end (config → sim/synth/timing → risultato), rimanda areports/experiments/EXP-XXXX/.errors.log— errori/bug/regressioni incontrati durante lo sviluppo V2 stesso (non i bug V1, già chiusi inhardware/v1/docs/validation/bugs.md).
Campi minimi per entry (§26)
timestamp, experiment_id (se applicabile), git_commit, session/agent,
module, configuration, action, reason, command, result, errors, decision,
next_action
Per synthesis/timing aggiungere: LUT, FF, DSP, BRAM, Fmax, critical path, WNS/TNS. Per simulazione: test, vectors, cycles, PASS/FAIL, bit-exact result, stall cycles, memory wait, utilization.