First real RTL piece of the SPI interface (docs §8.1 protocol
draft): the physical layer only -- Mode 0 (CPOL=0, CPHA=0),
MSB-first, byte-level shift register with a 3-stage CDC synchronizer
for SCLK/MOSI/CS_N (the SPI master clock is asynchronous to the
FPGA system clock). Exposes rx_byte/rx_valid, tx_byte/tx_byte_req,
and cs_active/cs_start/cs_end to the (not yet written) protocol
engine.
Documented an important consumer contract on tx_byte_req: it is a
prefetch hint (fires once extra after the last byte of every
transaction, since the slave cannot know in advance whether the
master will keep clocking), not a "byte consumed" event -- a
consumer must advance any stateful pointer (e.g. a RAM read address)
on rx_valid instead, which fires exactly once per real byte
transferred.
sim/spi_slave_tb.v: bit-banged SPI master BFM (4 tests: single byte,
multi-byte in one CS period, back-to-back transactions, slower
SCLK). Two testbench-only bugs found and fixed during bring-up (RTL
itself needed no functional change beyond the tx_byte_req contract
comment): the BFM was advancing its tx queue on tx_byte_req instead
of rx_valid (see contract above), and inter-test reset pulses raced
against posedge clk (blocking `rst=1` landing on the same simulation
time as a clock edge) -- fixed by asserting/deasserting reset on
negedge clk instead.
Verified two ways: Icarus Verilog (4/4 tests pass) and the real
ECP5 toolchain used for prior benchmarks (Yosys 0.68 synth: 0
problems, 41 FF / 55 LUT4, no latches; nextpnr-ecp5 --45k --package
CABGA381 --speed 8 --freq 80: PASS, Fmax 403.23 MHz; ecppack:
bitstream generated with no errors).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WQV3vS9TXaGDJ5cRfnfidt
neuron_memory.v only handled a single neuron. Added an N_NEURONS
parameter (default 1, fully backward compatible) and a memory-bound
neuron loop: X is read once (shared layer input), and for each
neuron in turn W and bias are re-read from PSRAM and fed to a
single, reused neuron_parallel instance -- no change to the
validated compute datapath (neuron_parallel/mac8/mac_unit).
Addressing follows layer.v's neuron-major convention: neuron n's
weights live at w_base + n*N_INPUTS bytes, its bias at
bias_addr + n. Output changed from a single `y` port to a packed
`y_bus` (DATA_WIDTH*N_NEURONS bits, neuron-major), matching
layer.v's y_bus.
- rtl/neuron_memory.v: N_NEURONS parameter, neuron_index/
w_group_base/bias_group_addr tracking, y_reg[] array assembled
into y_bus, STATE_WAIT_N now loops back to STATE_READ_W for the
next neuron instead of finishing after one.
- sim/neuron_memory_tb.v: updated to the new y_bus port
(N_NEURONS=1 explicit); all 5 existing tests still pass unchanged,
confirming backward compatibility.
- sim/neuron_memory_multi_tb.v: new end-to-end test (full
memory_interface + psram_controller + psram_model stack) with
N_NEURONS=3, validating per-neuron addressing and a single done
pulse at the end of the sequence (scale, larger value, ReLU).
- Full regression re-run: all existing testbenches still pass.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WQV3vS9TXaGDJ5cRfnfidt
Both Phase 2 findings (docs/FPGA-NeuralNetwork-Engine.md) shared one
root cause: GROUPS = N_INPUTS / PARALLEL is integer division. When
N_INPUTS is not an exact multiple of PARALLEL, the remainder inputs
were silently dropped from the accumulation (wrong result, no
error); when PARALLEL > N_INPUTS, GROUPS = 0 and the controller's
terminal condition was never met, hanging the neuron forever.
Added a single elaboration-time guard to rtl/neuron_parallel.v: a
`generate` block instantiates a deliberately undefined module when
N_INPUTS % PARALLEL != 0, forcing a hard failure in both simulation
and synthesis instead of a silent wrong answer or a deadlock. Valid
configurations are unaffected (the branch is never elaborated). The
validated datapath (mac8/mac_unit/accumulation/ReLU/saturation) is
untouched -- this is authorized as a scoped exception to the
"core is fixed, do not touch" project policy, for this guard only.
- sim/neuron_parallel_guard_negative_nonmultiple_tb.v and
sim/neuron_parallel_guard_negative_degenerate_tb.v: negative tests
that must fail to elaborate; verified both fail with the expected
"Unknown module type" error.
- sim/parameter_sweep_tb.v: rewritten to valid-configs-only (the
three configs that used to demonstrate truncation/hang no longer
compile, by design); added PARALLEL=2 and PARALLEL=4 configs,
the two best-performing values from
docs/FPGA-Neural-Datapatch-Benchmark.md.
- Full regression re-run after the RTL change: all existing
testbenches still pass unchanged.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WQV3vS9TXaGDJ5cRfnfidt
micheleandClaude Sonnet 5