STEP20 work toward the V2 hardware release gate. Adds real new RTL
implementing the three pieces the previous freeze (V2.0.0) explicitly
left open, plus real, disclosed verification findings. Does NOT
declare hardware release complete -- see below.
New RTL:
- spi_host_bridge.v: real SPI slave protocol engine (WRITE_JOB/
WRITE_MEM/READ_MEM/STATUS/RESET opcodes), replacing the 110-pin
reg_* testbench bus as the intended physical host interface.
Isolated regression 18/18 PASS (tb_spi_host_bridge.v); two real
MISO-timing bugs found and fixed during its own development (see
the module's header for the root-cause writeup).
- ecp5_pll_sys_clk.v: real, tool-generated (Project Trellis ecppll)
EHXPLLL wrapper, 16MHz oscillator -> 64MHz system clock, with a
declared (not fabricated) simulation-only PLL bypass.
- reset_sync.v: standard async-assert/sync-deassert reset bridge
gating on external POR and PLL lock.
- fpga_neural_v2_top.v: board-level top wiring the above around the
STEP19 compute+memory design's own already-frozen submodules
(zero modification to neural_processor.v, dependency_manager.v,
sdram_unified_backend.v, or any other previously-frozen file).
Real findings from this step's own re-verification (both logged in
full in hardware/v2/logs/errors.log):
- ERR-0024: the current Icarus Verilog v13.0 install (updated since
the last freeze) gives WRONG bit-exact results for the
already-committed STEP19 regression. Cross-checked against
Verilator per this project's own standing protocol (DEC-0004) --
the STEP19 baseline (single SDRAM, N=2/N=4, raw reg_* interface) IS
bit-exact correct, reconfirmed today, matching the historical cycle
counts exactly. Two provably-zero-behavior-change declaration-order
fixes were required just to get the current toolchain to elaborate
the already-shipped STEP19 files at all.
- ERR-0025: a real SPI-bridge protocol race (fixed) plus a SEPARATE,
real, UNRESOLVED defect -- two jobs dispatched through the real SPI
path with realistic pacing produce wrong compute results, even
though job registration itself is confirmed correct at the
handshake. Root cause not yet isolated. Committed as a known-failing
regression (tb_fpga_neural_v2_top_smoke.v) documenting the gap
honestly rather than hiding it.
Given ERR-0025 Part B is real and unresolved, synthesis/P&R of the new
board-level top was deliberately not attempted this round, and V2
hardware release is NOT declared complete. See decisions.log DEC-0036
and hardware/v2/docs/{CHIP_READINESS,OPEN_ITEMS}.md for the full,
itemized status.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013xXuuRUWZScuo1DeYJxs3v
FASE #1 hardware freeze for FPGA-Neural V2, N4/P8, single external
SDRAM (Alliance Memory AS4C4M16SA-6TIN) serving weights, activations,
and results through one physical sdram_controller.v instance. Removes
the PSRAM dependency (hardware/v1/rtl/psram_controller.v +
memory_interface.v) from the V2 physical path entirely -- V1 itself
remains fully unmodified, the golden reference.
New RTL: sdram_unified_backend.v (2-way W/AR arbitration over one
SDRAM controller, real per-byte DQM write masking added to
sdram_controller.v for correct single-byte result writes with no
read-modify-write), nms_neural_multiprocessor_sdram_unified.v (the
frozen top-level). Two real bugs found and fixed via full-system
testing before being accepted (ERR-0023): a deadlock and an off-by-one
data-shift bug in the new arbitration logic.
Real results: N=4 and N=2 D-Stress bit-exact (256/256 neurons), 40
real AUTO REFRESH events interleaved with zero corruption, real
Yosys+nextpnr-ecp5 synthesis/P&R for LFE5U-45F-8CABGA381 (149/245
TRELLIS_IO, a real 45-pin reduction from the prior dual-memory
design). Timing is MARGINAL (1/8 P&R seeds >=80MHz), reported honestly
rather than masked by the best seed.
Real, sourced ball-level pinout for the SDRAM bus + clk/rst (39/149
signals, P&R-verified) using the official Lattice ECP5U-45 pinout CSV
found on disk during this step's own pre-commit review -- corrects an
earlier draft that wrongly assumed no real pinout data was available.
Chip readiness: NO. Real, disclosed blockers remain (no physical host
interface exists yet -- the RTL's own reg_* ports are a 110-pin raw
test-harness bus; clock source/PLL decision; power/configuration
component selection) -- see hardware/v2/docs/{HARDWARE_FREEZE,
CHIP_READINESS,OPEN_ITEMS}.md for the complete, itemized status.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013xXuuRUWZScuo1DeYJxs3v
micheleandClaude Sonnet 5