Files
DigiRadio/Software/partitions.csv
T
micheleandClaude Sonnet 5 3a58d33aad Add DAB ANTCAP calibration and fix BT1035 boot banner timing
Extend the FM-only ANTCAP antenna-varactor override to DAB, mirroring the
existing mechanism end to end (driver, tuner, service, EEPROM storage,
HTTP API). Live sweep on real hardware found no ANTCAP value beating
auto-tune on the ensembles tested, so DAB stays on auto-tune by default.

Also fix BT1035 boot: the module's real boot banner doesn't appear until
~18-24s after RESET# releases, not the 3.5s previously waited; add a
2-attempt retry and a baud-rate probe fallback for diagnostics.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-08-21 08:12:08 +02:00

1.1 KiB

1# DigiRadio partition table (16 MB flash — ESP32-S3-WROOM-1)
2# ota_0 + ota_1: dual OTA app slots (equal size, 64 KiB aligned).
3# dsp: updatable ADAU1701 program blob (task 3.1).
4# nvs_keys: NVS encryption keys (secure-store slice).
5# First flash after this layout: idf.py erase-flash flash (wired), not OTA.
6# nvs: bumped 24 KiB -> 64 KiB (2026-08-19) — the small original size was a
7# suspected contributor to intermittent NvsAudioProfileStore::saveProfile()
8# store_failed under this project's accumulated write traffic (wifi creds,
9# station_list, audio_profile_json, last_preset). otadata/nvs_keys/phy_init
10# shift forward to make room; they still fit before ota_0's existing 64 KiB
11# alignment boundary (0x20000), so ota_0/ota_1/dsp offsets are unchanged.
12# Name, Type, SubType, Offset, Size, Flags
13nvs, data, nvs, 0x9000, 0x10000,
14otadata, data, ota, 0x19000, 0x2000,
15nvs_keys, data, nvs_keys, 0x1b000, 0x1000,
16phy_init, data, phy, 0x1c000, 0x1000,
17ota_0, app, ota_0, 0x20000, 0x400000,
18ota_1, app, ota_1, 0x420000, 0x400000,
19dsp, data, 0x40, 0x820000, 0x40000,