Git archaeology traced the boot sequence back to fd9d4ae (2026-08-15,
documented 5/5 clean boots), which removed a redundant AT+RESET and added
the boot-banner listen window in a single commit. Comparing that
validated design to today's working tree found one real structural
deviation: an intra-boot() retry loop (2 attempts, only 300ms between
hardware reset pulses) added earlier today, which never existed in the
validated baseline. The BT1035 datasheet's own Reset Protection timeout
(typically >1.8s) means a second pulse fired only 300ms later may not
reach a clean power-off state before repowering.
Removed the intra-boot() retry loop entirely (kBootAttempts,
kBootRetryDelayMs deleted) — boot() now makes exactly one attempt per
call, matching fd9d4ae. Retries remain exclusively at the
bt1035RetryTask level (whole clean boot() calls, confirmed live at
~31.8s apart). Banner wait (25s) and GPIO readback left untouched.
Documented the full commit-by-commit analysis and live test result
(structurally correct, hit-rate inconclusive on this sample) in the RF
investigation report and TODO for future sessions.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
micheleandClaude Sonnet 5
3ffc9930cd