Extends the existing FM/DAB ANTCAP EEPROM persistence pattern
(Eeprom24aa::writeFmAntCap/writeDabAntCap) to the crystal trim found by
POST /api/tuner/xtal-calibrate, which previously only applied live and
was lost on every reboot.
- Eeprom24aa gains readXtalCalibration()/writeXtalCalibration() at word
addresses 0x02 (ibias), 0x03 (ctun), 0x04-0x07 (xtalFreqHz,
big-endian), right after the existing FM/DAB ANTCAP bytes.
- HardwareBootstrap::boot() now boots ADAU1701 before Si4684 (needed so
the EEPROM read, which borrows ADAU1701's I2C bus, can happen before
Si4684's boot() call, which takes the crystal trim as an argument),
loads the saved trim if present, and falls back to the compiled-in
defaults (ibias=72, ctun=0, xtalFreqHz=19199750) otherwise.
- POST /api/tuner/xtal-calibrate now persists every successful live
recalibration automatically ("persisted":true/false in the response)
via a new saveXtalCalibration()/net::AntennaCalibration::saveXtal
bridge, mirroring the ANTCAP save pattern.
Verified live: boot log confirms "Xtal not calibrated" before the first
save, "Xtal calibration loaded: ibias=72 ctun=0 xtal_freq_hz=19199750"
after, surviving a reboot; DAB/FM tuning unaffected (DAB CNR 17-19dB,
locked).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Extend the FM-only ANTCAP antenna-varactor override to DAB, mirroring the
existing mechanism end to end (driver, tuner, service, EEPROM storage,
HTTP API). Live sweep on real hardware found no ANTCAP value beating
auto-tune on the ensembles tested, so DAB stays on auto-tune by default.
Also fix BT1035 boot: the module's real boot banner doesn't appear until
~18-24s after RESET# releases, not the 3.5s previously waited; add a
2-attempt retry and a baud-rate probe fallback for diagnostics.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Read the factory 24AA025E48 serial after ADAU I2C boot, derive SoftAP SSID, BT name, STA hostname, and expose serialNumber on GET /api/health with graceful fallbacks.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose discoverable mode and A2DP control over REST, add persisted
DAB/FM preset list with web UI, and document gaps in docs/TODO.md.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose Si4684, ADAU1701, and BT1035 boot flags via CompanionChipStatus after
HardwareBootstrap; update API manual schema for Slice 8.
Co-authored-by: Cursor <cursoragent@cursor.com>
Implement Bt1035Driver AT init (AT+AUXCFG=1), core AT parser with host tests,
wire boot into HardwareBootstrap, and document DAB/FM tuning workflows in ch-si4684.
Co-authored-by: Cursor <cursoragent@cursor.com>
Safeload mixer/EQ/master on the ADAU1701, persist AudioProfile in NVS,
expose /api/audio routes and web UI controls, with host tests and manual sync.
Co-authored-by: Cursor <cursoragent@cursor.com>
micheleandClaude Sonnet 5