Redundant AT+RESET sent right after the hardware RESET# pulse could interrupt
the module mid bring-up; boot-banner probe window (1500ms) was too short for
the real +VER banner (~5s), causing spurious "AT init failed". 5/5 clean
boots after fix vs ~1/13 before.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Si4684Driver::getPartInfo()/getSysState() existed but were never called, so
their byte-offset bugs never surfaced. Wired them into a boot-time diagnostic
log (part number, firmware revision, active image, streamed blob byte counts)
to check whether the loaded DAB/FM firmware images are genuine and intact, as
an alternative explanation to the QFN exposed-pad hardware hypothesis.
Fixed two rounds of off-by-one bugs found while doing this: the fields were
initially read one byte too far right (e.g. firmwareBuild was reading a flag
byte, not a version number); the first fix undershot in the other direction
by not accounting for readRaw()'s one-byte SPI lead-in before STATUS0 (already
documented and confirmed elsewhere in this file, in pollStc()) -- caught
because the "fixed" GET_SYS_STATE reported image=192 (0xC0), the exact
signature of STATUS3 with PUP_STATE=3 seen throughout this investigation.
All three response buffers were already sized for the lead-in byte, which
confirmed the correct fix.
Verdict, captured live: blob streamed bytes match local file sizes exactly (no
truncation), GET_SYS_STATE reports image=2 (DAB active, correct), GET_PART_INFO
reports part=4684 (matches expected Si4684 part number) with a plausible
firmware revision -- the loaded DAB firmware is genuine and intact. This closes
the last plausible firmware-side explanation for the FM/DAB no-lock symptom;
docs/si4684-rf-investigation-report.md and docs/TODO.md (P4/H5) updated with
the full record and verdict.
Also noted, not yet fixed: BT1035 AT-init now fails deterministically on every
boot (was a one-off earlier this session) -- see report's Open Items.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Add docs/si4684-rf-investigation-report.md: full record of the FM/DAB no-lock
investigation (crystal, front-end matching, ANTCAP sweep, continuity, leading
EP solder-defect hypothesis, PCBWay report sent) plus the separate audio
profile NVS bug found and partially fixed this session.
- Fix sigma_i2c_write() (SigmaStudioFW.c): no retry on I2C failure meant a single
transient NACK anywhere in a long safeload burst (EQ apply = ~55 sequential
transactions) aborted the whole sequence. Added a 3-attempt retry.
- Add granular failure logging (AudioService::applyProfileToDsp/persistProfile,
Adau1701Driver::applyMixer/applyEq, NvsAudioProfileStore::saveProfile error
codes) to isolate the remaining NVS-side audio profile save failure.
- Si4684Driver::tuneFm gains an optional ANTCAP argument (default 0 = unchanged
auto-tune behavior) used during this session's front-end matching sweep.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Streaming (main feature this session):
- New WebRadioConfig/WebRadioJson core types, ISecureStore-backed persistence
- New webradio::WebRadioService (thread-safe live config) + GET/POST /api/streaming
- web_radio_stream task now runtime-toggleable (no reboot), no hardcoded URL
- Content-Type diagnostic: warns clearly when a URL is a webpage, not an audio stream
Boot cleanup:
- Removed boot-time auto FM/DAB tune, auto-beep, and the (now-concluded) Si4684
crystal IBIAS/CTUN empirical sweep from main.cpp — tuning/beep are on-demand
via the existing REST API only
Web UI:
- Modernized styling (cards, gradients, toggle switches, light/dark theme)
- New Stream tab wired to /api/streaming
Fixes found via real idf.py build (not just clangd):
- Restored wrongly-removed si4684/Si4684Tuner.hpp include in main.cpp
- Fixed MP3Decode() argument types in web_radio_stream.cpp (unsigned char**/int*)
Quality-gate fixes:
- Host-test stub headers (esp_log.h, freertos/*) so TunerService.cpp's
scanForStation logging/pacing compiles for station_service_test /
integration_service_test instead of running stale binaries
- Added WifiScanner and WebRadioService manual sections; filled in missing
Doxygen docs on BluetoothService, i2s_sdata_probe, test_firmware, Bt1035At
- Ignore clangd's .cache/ index directory
Also includes prior uncommitted work carried in the tree: Wi-Fi/Bluetooth
device scan REST API and UI (WifiScanner, BT scan), SigmaStudio TCP bridge,
and the current ADAU1701 SigmaStudio DSP program export.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Switch BT1035 bring-up from Line-In to I2S slave (AT+AUXCFG=3, AT+I2SCFG=67) to match the ADAU1701 PCM routing, confirm 2 kΩ I2C pull-ups on R1/R16, and sync firmware docs, AGENTS rules, and the DATASHEET bundle.
Co-authored-by: Cursor <cursoragent@cursor.com>
Align README, manual, and backlog to 0.8.4; add Web UI System tab for OTA/DSP uploads, serial in health header, FM seek down, and BT1035 paired list plus auto-reconnect API.
Co-authored-by: Cursor <cursoragent@cursor.com>
Decouple the SigmaStudio RAM download from compiled-in adau1701_program.c:
DRAD v1 blobs in the dsp partition with embedded fallback, POST /api/dsp/program,
and host-tested blob parse/serialize helpers.
Co-authored-by: Cursor <cursoragent@cursor.com>
Read the factory 24AA025E48 serial after ADAU I2C boot, derive SoftAP SSID, BT name, STA hostname, and expose serialNumber on GET /api/health with graceful fallbacks.
Co-authored-by: Cursor <cursoragent@cursor.com>
Enable GPIO_PULLDOWN_ENABLE during gpio_config so RSTB cannot glitch high before gpio_set_level(0), and add manual validation notes explaining why the internal pull-down complements the external one.
Co-authored-by: Cursor <cursoragent@cursor.com>
Ship station reorder, DAB playing ids in presets, RDS PS/RT and DAB DLS in tuner status, Si4684 data-service read, host tests, and UI now-playing lines.
Co-authored-by: Cursor <cursoragent@cursor.com>
Clear doc-block warnings so doxygen exits 0, add GitHub Actions
for host tests, Doxygen, and manual sync, and document CI in the manual.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose discoverable mode and A2DP control over REST, add persisted
DAB/FM preset list with web UI, and document gaps in docs/TODO.md.
Co-authored-by: Cursor <cursoragent@cursor.com>
Implement Bt1035Driver AT init (AT+AUXCFG=1), core AT parser with host tests,
wire boot into HardwareBootstrap, and document DAB/FM tuning workflows in ch-si4684.
Co-authored-by: Cursor <cursoragent@cursor.com>
Document the ADAU1701 schematic chain (sigma-chain.jpg), cross-link from
hardware/firmware chapters, skip safeload on fixed high-pass band 0, and
match EqProfile default peaking frequencies to SigmaStudio.
Co-authored-by: Cursor <cursoragent@cursor.com>
Safeload mixer/EQ/master on the ADAU1701, persist AudioProfile in NVS,
expose /api/audio routes and web UI controls, with host tests and manual sync.
Co-authored-by: Cursor <cursoragent@cursor.com>
Implement ESP-IDF walking skeleton with SoftAP, health API, and host
tests, then Slice 2 ISecureStore/NvsSecureStore, STA join, POST
/api/wifi, and the provisioning web UI.
Co-authored-by: Cursor <cursoragent@cursor.com>
micheleandClaude Sonnet 5