POST /api/streaming's JSON parser only accepted "http://" URLs,
rejecting any "https://" URL with invalid_json before ever attempting
a connection. Nearly every real internet radio stream today is HTTPS-
only, so this made the feature fail for essentially any station a
user would actually try.
Two changes were needed together: the parser now accepts both http://
and https://, and web_radio_stream.cpp's esp_http_client now attaches
ESP-IDF's built-in CA certificate bundle (crt_bundle_attach) so the
TLS handshake actually verifies -- CONFIG_MBEDTLS_CERTIFICATE_BUNDLE
was already enabled in sdkconfig but never wired up here. Requires
adding mbedtls to main's PRIV_REQUIRES (esp_crt_bundle.h lives there).
Confirmed live: an https:// stream URL now gets accepted by the API
and produces a real HTTP response (404, from a guessed-wrong path) --
before this fix it never reached the network at all.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Root cause of FM/DAB "stonata" audio: xtalCtun=31/nominal XTAL_FREQ
defaults were never measured against this board's actual crystal
(Abracon ABM8-19.200MHZ-10-1-U-T, CL=10pF, two external 15pF load
caps). Fixed via CTUN trim by ear (31->0) plus a new live calibration
loop that reads the Si4684's own FM_RSQ FREQOFF field (broadcast
carriers are GPS-locked, so it's a free precision frequency reference)
to trim XTAL_FREQ with no lab equipment. Converged to CTUN=0,
XTAL_FREQ=19199750 Hz, residual -3/-4 ppm cross-checked on two
stations.
New tools/infrastructure (kept, not one-off):
- Si4684Driver::recalibrateXtal() + POST /api/tuner/xtal-calibrate:
live crystal re-trim without an ESP32 reflash.
- FM_RSQ FREQOFF exposed as "freqoff_ppm" in GET /api/tuner/status.
- tools/si4684_xtal_calibration.py: automates the trim loop.
- tools/si4684_antenna_calibration.py: AN851 Appendix A ANTCAP/VARM/VARB
sweep tool (same session, separate calibration).
- CONFIG_ESP32_I2S_TEST_TONE (off by default): isolates Si4684-specific
audio issues from shared-downstream ones by writing a tone directly
over the I2S bus the Si4684 also uses.
- SIGMA_WRITE_REGISTER_BLOCK/sigma_safeload_block now retry on NACK and
verify via read-back instead of firing I2C writes blind.
- FM de-emphasis set to European 50us (was left at the US 75us default).
- DAB_ACF_ENABLE restored to its previous 0x0000 with a citation
explaining why (tested the datasheet default of 0x0003, made things
audibly worse).
See docs/si4684-rf-investigation-report.md's 2026-08-23 entry for the
full elimination chain and docs/TODO.md for follow-up work (persisting
calibration results to EEPROM instead of requiring a firmware edit).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Extend the FM-only ANTCAP antenna-varactor override to DAB, mirroring the
existing mechanism end to end (driver, tuner, service, EEPROM storage,
HTTP API). Live sweep on real hardware found no ANTCAP value beating
auto-tune on the ensembles tested, so DAB stays on auto-tune by default.
Also fix BT1035 boot: the module's real boot banner doesn't appear until
~18-24s after RESET# releases, not the 3.5s previously waited; add a
2-attempt retry and a baud-rate probe fallback for diagnostics.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New endpoint accepts chunked, header-less, 16-bit LE stereo PCM @ 48 kHz
in the request body and writes it straight to the shared I2S sink for as
long as the connection stays open. Chosen deliberately unencoded (no
MP3/AAC/Opus decode) to keep this path as simple and low-risk as
possible — the companion app controls the encoding on its side.
Extracted the I2S TX channel that used to be owned outright by
web_radio_stream.cpp into main/esp32_i2s_sink.cpp, shared by both
producers with a simple tryAcquire()/release() exclusivity guard — web
radio streaming and a phone PCM stream would otherwise fight over the
same physical wire. web_radio_stream.cpp now acquires/releases around
each streamWhileEnabled() cycle instead of owning the channel itself.
net::PhoneStreamSink is a plain function-pointer struct (not a class
hierarchy) threaded through NetBootstrap::start() -> SetupWebServer::start()
-> HttpRouteContext, so components/net stays free of I2S driver headers;
main/phone_stream.cpp supplies the concrete functions (bound to
esp32_i2s_sink) and does the int16->ADAU 32-bit-slot conversion, batched
per chunk rather than per sample for the same reason as the web radio
stutter fix (6974095/7e65394 lineage).
Verified by build only — not confirmed live yet (board disconnected this
session); the actual phone app that will exercise this endpoint doesn't
exist yet either.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
Streaming (main feature this session):
- New WebRadioConfig/WebRadioJson core types, ISecureStore-backed persistence
- New webradio::WebRadioService (thread-safe live config) + GET/POST /api/streaming
- web_radio_stream task now runtime-toggleable (no reboot), no hardcoded URL
- Content-Type diagnostic: warns clearly when a URL is a webpage, not an audio stream
Boot cleanup:
- Removed boot-time auto FM/DAB tune, auto-beep, and the (now-concluded) Si4684
crystal IBIAS/CTUN empirical sweep from main.cpp — tuning/beep are on-demand
via the existing REST API only
Web UI:
- Modernized styling (cards, gradients, toggle switches, light/dark theme)
- New Stream tab wired to /api/streaming
Fixes found via real idf.py build (not just clangd):
- Restored wrongly-removed si4684/Si4684Tuner.hpp include in main.cpp
- Fixed MP3Decode() argument types in web_radio_stream.cpp (unsigned char**/int*)
Quality-gate fixes:
- Host-test stub headers (esp_log.h, freertos/*) so TunerService.cpp's
scanForStation logging/pacing compiles for station_service_test /
integration_service_test instead of running stale binaries
- Added WifiScanner and WebRadioService manual sections; filled in missing
Doxygen docs on BluetoothService, i2s_sdata_probe, test_firmware, Bt1035At
- Ignore clangd's .cache/ index directory
Also includes prior uncommitted work carried in the tree: Wi-Fi/Bluetooth
device scan REST API and UI (WifiScanner, BT scan), SigmaStudio TCP bridge,
and the current ADAU1701 SigmaStudio DSP program export.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Stream application binaries to the inactive OTA slot via POST /api/system/ota,
validate the esp_app_desc project name in core, and cancel rollback after a
healthy network boot through OtaService::confirmBoot().
Co-authored-by: Cursor <cursoragent@cursor.com>
Read the factory 24AA025E48 serial after ADAU I2C boot, derive SoftAP SSID, BT name, STA hostname, and expose serialNumber on GET /api/health with graceful fallbacks.
Co-authored-by: Cursor <cursoragent@cursor.com>
Replace the services stub with IntegrationService for boot preset recall and tune orchestration, persist last preset in NVS, and remove invalid @return tags that broke CI on T4 metadata headers.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose discoverable mode and A2DP control over REST, add persisted
DAB/FM preset list with web UI, and document gaps in docs/TODO.md.
Co-authored-by: Cursor <cursoragent@cursor.com>
Implement Bt1035Driver AT init (AT+AUXCFG=1), core AT parser with host tests,
wire boot into HardwareBootstrap, and document DAB/FM tuning workflows in ch-si4684.
Co-authored-by: Cursor <cursoragent@cursor.com>
Safeload mixer/EQ/master on the ADAU1701, persist AudioProfile in NVS,
expose /api/audio routes and web UI controls, with host tests and manual sync.
Co-authored-by: Cursor <cursoragent@cursor.com>
Implement ESP-IDF walking skeleton with SoftAP, health API, and host
tests, then Slice 2 ISecureStore/NvsSecureStore, STA join, POST
/api/wifi, and the provisioning web UI.
Co-authored-by: Cursor <cursoragent@cursor.com>
micheleandClaude Sonnet 5