Package/pinout/ratings mismatches, SPOF as REVIEW, EMI only with a
datasheet quote, and Tj from copper+vias+θJA when every parameter exists.
Re-extract SI layout_rules from 1.12.0; ImpedenceFinder license stays UNKNOWN.
Each layout_rules SI requirement (diff/SE Z, skew, max length, spacing,
ref plane, vias, layer, return, series R) is one PASS/FAIL/MARGIN finding
with FACT and REQUIREMENT. USB/HDMI/PCIe/ETH/LVDS/DDR only; I2C GPIO CC
and analog REGN are skipped. No invented 90 Ω.
PE-ESD-001 only on J* connector–IC nets (skip NC, unconnected, VSYS/GND/3V3).
PE-PI-001 treats any capacitor on the rail, including KiCad slash prefixes, as
decoupling. Sort findings ERROR then WARNING then INFO, then RULE/RISK/REVIEW/INFO.
Report sidebar is a collapsed expand-on-click tree instead of an all-open list.
GET /report and complete_findings fail-soft and sort the same way.
ERROR stays only for RULE+MANDATORY. Hierarchy walks component→pin→net→block.
Derating is PASS/MARGIN/RISK from Vop/Vrated. Timing and PI skip without numbers.
ESD and HS return path are REVIEW, not RULE ERROR.
Fill action on every finding and show it in the report. Stitch/return only
on large HS/power nets. Parse stackup thickness, arcs, and vias from the
board. IC courtyard pad copper is not PE-PLC-004 RULE. Recommended RC/cap
stay REVIEW.
FACT, REQUIREMENT, and INFERENCE are separate fields; datasheet provenance
lives in the rule DB so Recommended cannot stay ERROR; LLM output is REVIEW.
Designer decisions persist across rescans. Schematic and PCB share one library
and the same finding object in the report UI.
michele