LS/FS rates, pull-up/down, and VBUS come from the base spec. Cable Z0 90 ohm is CABLE; PCB should 90 ohm is RECOMMENDED. L2 differential_impedance stays UNKNOWN. Rp/Rd/Ra from CabCon Tables 4-27/28/29. IEEE Section One/Three and HDMI still missing. PDFs not in git.
NUMERIC rows cite document title, revision, section/table, and page. USB Zdiff, Type-C Rp/Rd, 10BASE-T, and 1000BASE-T stay UNKNOWN. PDFs are not in git.
USB 2.0 is protocol, Type-C is connector, USB 2.0 over Type-C is the
implementation. Ethernet/HDMI skeletons stay UNKNOWN with needed_document.
No invented ohms; Mini HDMI is connector-only; RJ45 is not 1000BASE-T.
PCIe/CXL keep logical vs physical ids. I2C, CAN, RGMII and missing
high-speed processor interfaces get required_checks; numbers stay
UNKNOWN/MISSING_SOURCE until an official cite. No invented ohms.
L3 CHANNEL structure for timing budget, insertion loss, return loss,
crosstalk, and complete channel. Numeric PASS/FAIL only from existing
channel FACT; otherwise a visible skip. No OpenEMS, no invented S-parameters,
no M6 packs.
Instances, L0–L3 max level, measured/limit/margin/source/method, traceability chain. FAIL listed first, not under Warning. Visible skips. No pack numbers, no L3 solver.
Presence and connection only. FAIL solely on missing MANDATORY structure.
AXI4 internal is NOT_APPLICABLE, not FAIL. RECOMMENDED never FAIL. No L1–L3
and no invented ohms/mm/ps.
physical_bus_instance from declaration, silicon/part, pin/net names, and
pairs. USB and DDR fixtures emit groups; AXI4 internal attaches no PCB
nets. Ambiguity is REVIEW, not FAIL. No L0–L3 certifier and no invented Z.
Versioned JSON skeletons without invented ohms/mm/ps. RECOMMENDED is not
FAIL-mandatory; typical-as-standard is rejected. Report Protocolli is empty
until recognition (M1+). Native src overlays inherited periscopex on the
package path.
WROOM lands are not the ESP32 die table (U11). QFN-48 pads 25–48 are
not extras when extraction stopped at 1–24 (U12). VQFN is the QFN
family (U19 24-QFN 4×4). Real extra signal pads still ERROR.
USB-C A5/B5 are contacts, not EP. Datasheet pintable, KiCad
.kicad_mod, and embedded PCB pads join by pin identity. Missing
pintable skips; scalar pin_count is never an ERROR authority.
Add /api/library datasheet import and component GET/PUT with no exam.
Reorganize pytest into datasheet, library, schematic, PCB, and AF+AI.
Document Rust criteria (none chosen; no rustup) and coding conformity.
michele