Fill 10BASE-T numbers from IEEE 802.3-2015 Section One Clause 14 (2.77.0).

Cable 100 Ω / 100 m / 11.5 dB stay CABLE. L2 PCB Zdiff UNKNOWN. 1000BASE-T not in this volume.

periscope/src/backend/periscopex/protocol_catalog.py

@@ -588,12 +588,16 @@ DOC_USB_PD_VSAFE = (
 DOC_IEEE_8023 = "IEEE 802.3 (clause for this variant; not on file)"
 DOC_IEEE_2012 = "IEEE Std 802.3-2012 IEEE Standard for Ethernet"
 REV_IEEE_2012 = "2012"
+DOC_IEEE_2015 = "IEEE Std 802.3-2015 IEEE Standard for Ethernet"
+REV_IEEE_2015 = "2015"
 ORG_IEEE = "IEEE"
 DOC_IEEE_S1_C14 = (
-    "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+    "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single "
+    "number here; 100 Ω is twisted-pair link-segment / 100 Ω test load, not PCB Zdiff)"
 )
 DOC_IEEE_S3_C40 = (
-    "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+    "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); "
+    "need 802.3 Section Three"
 )
 DOC_IEEE_S3_C36 = (
     "IEEE Std 802.3-2012 Section Three (1000BASE-X; not in Section Two)"
@@ -1209,6 +1213,72 @@ def build_m0_catalog() -> dict[str, Any]:
                     ],
                 ))
                 continue
+            if lid == "10base-t" and p == "data_rate":
+                out.append(_num(
+                    pid, p, 10.0, "Mb/s",
+                    document=DOC_IEEE_2015, organization=ORG_IEEE,
+                    revision=REV_IEEE_2015, section="14.1.1", page="374",
+                    conditions=["type 10BASE-T including 10BASE-Te", "Section One Clause 14"],
+                ))
+                continue
+            if lid == "10base-t" and p == "maximum_channel_length":
+                out.append(_num(
+                    pid, p, 100.0, "m",
+                    document=DOC_IEEE_2015, organization=ORG_IEEE,
+                    revision=REV_IEEE_2015, section="14.1.1", page="374",
+                    source_type="CABLE",
+                    conditions=[
+                        "0 m to at least 100 m of twisted pair without a repeater",
+                        "100 m is the design objective (14.1.1.3); longer permitted if 14.4 is met",
+                        "not a PCB trace length",
+                    ],
+                ))
+                continue
+            if lid == "10base-t" and p == "cable_channel":
+                out.append(_num(
+                    pid, p, 100.0, "ohm",
+                    document=DOC_IEEE_2015, organization=ORG_IEEE,
+                    revision=REV_IEEE_2015, section="14.4.2.2", page="399",
+                    source_type="CABLE",
+                    conditions=[
+                        "twisted-pair differential characteristic impedance 100 Ω ± 15 Ω (1–16 MHz)",
+                        "3 m pair: 85–111 Ω at 5.0–10 MHz",
+                        "not a PCB trace differential impedance",
+                        "not 1000BASE-T (Clause 40 is not in Section One)",
+                    ],
+                ))
+                continue
+            if lid == "10base-t" and p == "insertion_loss":
+                out.append(_num(
+                    pid, p, 11.5, "dB",
+                    document=DOC_IEEE_2015, organization=ORG_IEEE,
+                    revision=REV_IEEE_2015, section="14.4.2.1", page="399",
+                    source_type="CABLE",
+                    conditions=[
+                        "simplex link segment maximum, 5.0–10 MHz",
+                        "10BASE-T MAU that is not 10BASE-Te (Te max is 8.5 dB)",
+                    ],
+                ))
+                continue
+            if lid == "10base-t" and p == "return_loss":
+                out.append(_num(
+                    pid, p, 15.0, "dB",
+                    document=DOC_IEEE_2015, organization=ORG_IEEE,
+                    revision=REV_IEEE_2015, section="14.3.1.2.2", page="394",
+                    source_type="PCB",
+                    conditions=[
+                        "MAU TD circuit: reflection at least 15 dB below incident",
+                        "5.0–10 MHz, vs simplex link in 14.4.2.2 range",
+                        "not a PCB trace Zdiff number",
+                    ],
+                ))
+                continue
+            if lid == "10base-t" and p in {
+                "differential_impedance", "impedance_tolerance", "termination",
+            }:
+                nd = DOC_IEEE_S1_C14
+                out.append(_c(pid, p, "UNKNOWN", needed_document=nd))
+                continue
             if lid == "100base-fx" and p == "data_rate":
                 out.append(_num(
                     pid, p, 100.0, "Mb/s",
@@ -1251,6 +1321,45 @@ def build_m0_catalog() -> dict[str, Any]:
                     "1500 V rms at 50 Hz to 60 Hz for 60 s",
                 ],
             ))
+        if lid == "10base-t":
+            out.append(_num(
+                pid, "isolation_after_test", 2.0e6, "ohm",
+                document=DOC_IEEE_2015, organization=ORG_IEEE,
+                revision=REV_IEEE_2015, section="14.3.1.1", page="389",
+                conditions=[
+                    "MAU MDI that is not a PI",
+                    "resistance after isolation test, measured at 500 V dc",
+                    "minimum 2 MΩ",
+                ],
+            ))
+            out.append(_num(
+                pid, "isolation_rms", 1500.0, "V",
+                document=DOC_IEEE_2015, organization=ORG_IEEE,
+                revision=REV_IEEE_2015, section="14.3.1.1 a", page="388",
+                mandatory="OPTIONAL",
+                conditions=[
+                    "one of three allowed isolation tests",
+                    "1500 V rms at 50 Hz to 60 Hz for 60 s",
+                ],
+            ))
+            out.append(_num(
+                pid, "peak_differential_output", 2.2, "V",
+                document=DOC_IEEE_2015, organization=ORG_IEEE,
+                revision=REV_IEEE_2015, section="14.3.1.2.1", page="390",
+                source_type="PCB",
+                conditions=[
+                    "TD circuit peak differential, 100 Ω resistive load",
+                    "10BASE-T that is not 10BASE-Te: 2.2–2.8 V",
+                    "10BASE-Te is 1.54–1.96 V (not packed here)",
+                ],
+            ))
+            out.append(_num(
+                pid, "link_segment_delay_max", 1000.0, "ns",
+                document=DOC_IEEE_2015, organization=ORG_IEEE,
+                revision=REV_IEEE_2015, section="14.4.2.4", page="400",
+                source_type="CABLE",
+                conditions=["maximum propagation delay of a link segment", "pair also ≤ 5.7 ns/m"],
+            ))
         return out
 
     def _hdmi_cons(pid: str) -> list[dict[str, Any]]:
@@ -1461,10 +1570,10 @@ def build_m0_catalog() -> dict[str, Any]:
             ETH_CHECKS, _eth_cons(pid, lid),
             connector=conn, hints=hints,
             notes=(
+                "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and "
                 "IEEE 802.3-2012 Section Two (Clauses 21–33) on file. "
-                "10BASE-T is Clause 14 (Section One, not here). "
                 "1000BASE-T is Clause 40 (Section Three, not here). "
-                "100 Ω in Clause 25 is cabling/link-segment, not PCB Z. "
+                "100 Ω in Clause 14/25 is cabling/link-segment, not PCB Z. "
                 "Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct."
             ),
             incomplete=True,

periscope/src/backend/periscopex/protocol_data/catalog.json

@@ -4157,17 +4157,26 @@
         {
           "id": "10base-t-mdi-data_rate",
           "parameter": "data_rate",
-          "value_kind": "UNKNOWN",
+          "value_kind": "NUMERIC",
           "mandatory": "MANDATORY",
           "source_type": "STANDARD",
           "source_class": "NORMATIVE",
-          "value": null,
+          "value": 10.0,
-          "unit": null,
+          "unit": "Mb/s",
-          "source": null,
+          "source": {
-          "conditions": [],
+            "document": "IEEE Std 802.3-2015 IEEE Standard for Ethernet",
+            "organization": "IEEE",
+            "revision": "2015",
+            "section": "14.1.1",
+            "table": null,
+            "page": "374"
+          },
+          "conditions": [
+            "type 10BASE-T including 10BASE-Te",
+            "Section One Clause 14"
+          ],
           "value_origin": "SPEC",
-          "typical": false,
+          "typical": false
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
         },
         {
           "id": "10base-t-mdi-signaling",
@@ -4182,7 +4191,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-differential_impedance",
@@ -4197,7 +4206,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-impedance_tolerance",
@@ -4212,7 +4221,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-intra_pair_skew",
@@ -4227,7 +4236,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-pair_to_pair_skew",
@@ -4242,52 +4251,81 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-maximum_channel_length",
           "parameter": "maximum_channel_length",
-          "value_kind": "UNKNOWN",
+          "value_kind": "NUMERIC",
           "mandatory": "MANDATORY",
-          "source_type": "STANDARD",
+          "source_type": "CABLE",
           "source_class": "NORMATIVE",
-          "value": null,
+          "value": 100.0,
-          "unit": null,
+          "unit": "m",
-          "source": null,
+          "source": {
-          "conditions": [],
+            "document": "IEEE Std 802.3-2015 IEEE Standard for Ethernet",
+            "organization": "IEEE",
+            "revision": "2015",
+            "section": "14.1.1",
+            "table": null,
+            "page": "374"
+          },
+          "conditions": [
+            "0 m to at least 100 m of twisted pair without a repeater",
+            "100 m is the design objective (14.1.1.3); longer permitted if 14.4 is met",
+            "not a PCB trace length"
+          ],
           "value_origin": "SPEC",
-          "typical": false,
+          "typical": false
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
         },
         {
           "id": "10base-t-mdi-insertion_loss",
           "parameter": "insertion_loss",
-          "value_kind": "UNKNOWN",
+          "value_kind": "NUMERIC",
           "mandatory": "MANDATORY",
-          "source_type": "STANDARD",
+          "source_type": "CABLE",
           "source_class": "NORMATIVE",
-          "value": null,
+          "value": 11.5,
-          "unit": null,
+          "unit": "dB",
-          "source": null,
+          "source": {
-          "conditions": [],
+            "document": "IEEE Std 802.3-2015 IEEE Standard for Ethernet",
+            "organization": "IEEE",
+            "revision": "2015",
+            "section": "14.4.2.1",
+            "table": null,
+            "page": "399"
+          },
+          "conditions": [
+            "simplex link segment maximum, 5.0\u201310 MHz",
+            "10BASE-T MAU that is not 10BASE-Te (Te max is 8.5 dB)"
+          ],
           "value_origin": "SPEC",
-          "typical": false,
+          "typical": false
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
         },
         {
           "id": "10base-t-mdi-return_loss",
           "parameter": "return_loss",
-          "value_kind": "UNKNOWN",
+          "value_kind": "NUMERIC",
           "mandatory": "MANDATORY",
-          "source_type": "STANDARD",
+          "source_type": "PCB",
           "source_class": "NORMATIVE",
-          "value": null,
+          "value": 15.0,
-          "unit": null,
+          "unit": "dB",
-          "source": null,
+          "source": {
-          "conditions": [],
+            "document": "IEEE Std 802.3-2015 IEEE Standard for Ethernet",
+            "organization": "IEEE",
+            "revision": "2015",
+            "section": "14.3.1.2.2",
+            "table": null,
+            "page": "394"
+          },
+          "conditions": [
+            "MAU TD circuit: reflection at least 15 dB below incident",
+            "5.0\u201310 MHz, vs simplex link in 14.4.2.2 range",
+            "not a PCB trace Zdiff number"
+          ],
           "value_origin": "SPEC",
-          "typical": false,
+          "typical": false
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
         },
         {
           "id": "10base-t-mdi-crosstalk",
@@ -4302,7 +4340,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-magnetics_requirements",
@@ -4332,7 +4370,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-common_mode",
@@ -4347,7 +4385,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-connector_requirements",
@@ -4362,7 +4400,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-phy_requirements",
@@ -4392,7 +4430,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-vias",
@@ -4407,7 +4445,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-topology",
@@ -4422,25 +4460,134 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One Clause 14 (this 10BASE-T PCB field is not a single number here; 100 \u03a9 is twisted-pair link-segment / 100 \u03a9 test load, not PCB Zdiff)"
         },
         {
           "id": "10base-t-mdi-cable_channel",
           "parameter": "cable_channel",
-          "value_kind": "UNKNOWN",
+          "value_kind": "NUMERIC",
+          "mandatory": "MANDATORY",
+          "source_type": "CABLE",
+          "source_class": "NORMATIVE",
+          "value": 100.0,
+          "unit": "ohm",
+          "source": {
+            "document": "IEEE Std 802.3-2015 IEEE Standard for Ethernet",
+            "organization": "IEEE",
+            "revision": "2015",
+            "section": "14.4.2.2",
+            "table": null,
+            "page": "399"
+          },
+          "conditions": [
+            "twisted-pair differential characteristic impedance 100 \u03a9 \u00b1 15 \u03a9 (1\u201316 MHz)",
+            "3 m pair: 85\u2013111 \u03a9 at 5.0\u201310 MHz",
+            "not a PCB trace differential impedance",
+            "not 1000BASE-T (Clause 40 is not in Section One)"
+          ],
+          "value_origin": "SPEC",
+          "typical": false
+        },
+        {
+          "id": "10base-t-mdi-isolation_after_test",
+          "parameter": "isolation_after_test",
+          "value_kind": "NUMERIC",
           "mandatory": "MANDATORY",
           "source_type": "STANDARD",
           "source_class": "NORMATIVE",
-          "value": null,
+          "value": 2000000.0,
-          "unit": null,
+          "unit": "ohm",
-          "source": null,
+          "source": {
-          "conditions": [],
+            "document": "IEEE Std 802.3-2015 IEEE Standard for Ethernet",
+            "organization": "IEEE",
+            "revision": "2015",
+            "section": "14.3.1.1",
+            "table": null,
+            "page": "389"
+          },
+          "conditions": [
+            "MAU MDI that is not a PI",
+            "resistance after isolation test, measured at 500 V dc",
+            "minimum 2 M\u03a9"
+          ],
           "value_origin": "SPEC",
-          "typical": false,
+          "typical": false
-          "needed_document": "IEEE Std 802.3-2012 Section One Clause 14 (10BASE-T; not in Section Two)"
+        },
+        {
+          "id": "10base-t-mdi-isolation_rms",
+          "parameter": "isolation_rms",
+          "value_kind": "NUMERIC",
+          "mandatory": "OPTIONAL",
+          "source_type": "STANDARD",
+          "source_class": "NORMATIVE",
+          "value": 1500.0,
+          "unit": "V",
+          "source": {
+            "document": "IEEE Std 802.3-2015 IEEE Standard for Ethernet",
+            "organization": "IEEE",
+            "revision": "2015",
+            "section": "14.3.1.1 a",
+            "table": null,
+            "page": "388"
+          },
+          "conditions": [
+            "one of three allowed isolation tests",
+            "1500 V rms at 50 Hz to 60 Hz for 60 s"
+          ],
+          "value_origin": "SPEC",
+          "typical": false
+        },
+        {
+          "id": "10base-t-mdi-peak_differential_output",
+          "parameter": "peak_differential_output",
+          "value_kind": "NUMERIC",
+          "mandatory": "MANDATORY",
+          "source_type": "PCB",
+          "source_class": "NORMATIVE",
+          "value": 2.2,
+          "unit": "V",
+          "source": {
+            "document": "IEEE Std 802.3-2015 IEEE Standard for Ethernet",
+            "organization": "IEEE",
+            "revision": "2015",
+            "section": "14.3.1.2.1",
+            "table": null,
+            "page": "390"
+          },
+          "conditions": [
+            "TD circuit peak differential, 100 \u03a9 resistive load",
+            "10BASE-T that is not 10BASE-Te: 2.2\u20132.8 V",
+            "10BASE-Te is 1.54\u20131.96 V (not packed here)"
+          ],
+          "value_origin": "SPEC",
+          "typical": false
+        },
+        {
+          "id": "10base-t-mdi-link_segment_delay_max",
+          "parameter": "link_segment_delay_max",
+          "value_kind": "NUMERIC",
+          "mandatory": "MANDATORY",
+          "source_type": "CABLE",
+          "source_class": "NORMATIVE",
+          "value": 1000.0,
+          "unit": "ns",
+          "source": {
+            "document": "IEEE Std 802.3-2015 IEEE Standard for Ethernet",
+            "organization": "IEEE",
+            "revision": "2015",
+            "section": "14.4.2.4",
+            "table": null,
+            "page": "400"
+          },
+          "conditions": [
+            "maximum propagation delay of a link segment",
+            "pair also \u2264 5.7 ns/m"
+          ],
+          "value_origin": "SPEC",
+          "typical": false
         }
       ],
-      "notes": "IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 10BASE-T is Clause 14 (Section One, not here). 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
+      "notes": "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 14/25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
       "incomplete": true
     },
     {
@@ -4841,7 +4988,7 @@
           "typical": false
         }
       ],
-      "notes": "IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 10BASE-T is Clause 14 (Section One, not here). 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
+      "notes": "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 14/25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
       "incomplete": true
     },
     {
@@ -4891,7 +5038,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-signaling",
@@ -4906,7 +5053,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-differential_impedance",
@@ -4921,7 +5068,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-impedance_tolerance",
@@ -4936,7 +5083,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-intra_pair_skew",
@@ -4951,7 +5098,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-pair_to_pair_skew",
@@ -4966,7 +5113,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-maximum_channel_length",
@@ -4981,7 +5128,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-insertion_loss",
@@ -4996,7 +5143,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-return_loss",
@@ -5011,7 +5158,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-crosstalk",
@@ -5026,7 +5173,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-magnetics_requirements",
@@ -5056,7 +5203,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-common_mode",
@@ -5071,7 +5218,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-connector_requirements",
@@ -5086,7 +5233,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-phy_requirements",
@@ -5116,7 +5263,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-vias",
@@ -5131,7 +5278,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-topology",
@@ -5146,7 +5293,7 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         },
         {
           "id": "1000base-t-mdi-cable_channel",
@@ -5161,10 +5308,10 @@
           "conditions": [],
           "value_origin": "SPEC",
           "typical": false,
-          "needed_document": "IEEE Std 802.3-2012 Section Three Clause 40 (1000BASE-T; not in Section Two)"
+          "needed_document": "IEEE Std 802.3-2015 Section One does not contain Clause 40 (1000BASE-T); need 802.3 Section Three"
         }
       ],
-      "notes": "IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 10BASE-T is Clause 14 (Section One, not here). 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
+      "notes": "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 14/25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
       "incomplete": true
     },
     {
@@ -5486,7 +5633,7 @@
           "needed_document": "IEEE 802.3bz / later 802.3 2.5GBASE-T clause (not in 2012 Section Two)"
         }
       ],
-      "notes": "IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 10BASE-T is Clause 14 (Section One, not here). 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
+      "notes": "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 14/25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
       "incomplete": true
     },
     {
@@ -5807,7 +5954,7 @@
           "needed_document": "IEEE 802.3bz / later 802.3 5GBASE-T clause (not in 2012 Section Two)"
         }
       ],
-      "notes": "IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 10BASE-T is Clause 14 (Section One, not here). 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
+      "notes": "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 14/25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
       "incomplete": true
     },
     {
@@ -6128,7 +6275,7 @@
           "needed_document": "IEEE Std 802.3-2012 Section Four Clause 55 (10GBASE-T; not in Section Two)"
         }
       ],
-      "notes": "IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 10BASE-T is Clause 14 (Section One, not here). 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
+      "notes": "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 14/25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
       "incomplete": true
     },
     {
@@ -6449,7 +6596,7 @@
           "needed_document": "SGMII is not an IEEE 802.3 MDI clause in 2012 Section Two"
         }
       ],
-      "notes": "IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 10BASE-T is Clause 14 (Section One, not here). 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
+      "notes": "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 14/25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
       "incomplete": true
     },
     {
@@ -6771,7 +6918,7 @@
           "needed_document": "IEEE Std 802.3-2012 Section Three (1000BASE-X; not in Section Two)"
         }
       ],
-      "notes": "IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 10BASE-T is Clause 14 (Section One, not here). 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
+      "notes": "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 14/25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
       "incomplete": true
     },
     {
@@ -7102,7 +7249,7 @@
           "needed_document": "ISO/IEC 9314-3:1990 fiber-PMD (incorporated by IEEE 802.3-2012 Clause 26; optical MDI, not copper PCB ohms)"
         }
       ],
-      "notes": "IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 10BASE-T is Clause 14 (Section One, not here). 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
+      "notes": "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 14/25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
       "incomplete": true
     },
     {
@@ -7424,7 +7571,7 @@
           "needed_document": "IEEE 802.3 10GBASE-R clauses (not in 2012 Section Two)"
         }
       ],
-      "notes": "IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 10BASE-T is Clause 14 (Section One, not here). 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
+      "notes": "IEEE 802.3-2015 Section One (Clause 14 10BASE-T) and IEEE 802.3-2012 Section Two (Clauses 21\u201333) on file. 1000BASE-T is Clause 40 (Section Three, not here). 100 \u03a9 in Clause 14/25 is cabling/link-segment, not PCB Z. Not auto from RJ45. IEEE vs PHY vs PCB vs magnetics are distinct.",
       "incomplete": true
     },
     {

periscope/src/frontend/content/changelog.md

@@ -2,6 +2,13 @@
 
 What's new in Periscope.
 
+## 2.77.0 — 2026-09-22 — 10BASE-T from IEEE 802.3-2015 Section One
+
+IEEE Std 802.3-2015 Section One Clause 14 fills 10BASE-T: 10 Mb/s, 100 m design-objective link, cable 100 Ω ± 15 Ω, 11.5 dB link insertion loss, MAU TD return loss 15 dB, isolation 2 MΩ / 1500 V rms, TD peak 2.2 V. Cable 100 Ω is **CABLE**, not L2 PCB Zdiff. 1000BASE-T (Clause 40) is not in this volume.
+
+- [Changed] `protocol_catalog.py` + `catalog.json`.
+- [Changed] pytest `tests/pcb/test_protocol_pdf_pack.py`, `test_protocol_m6_m7.py`.
+
 ## 2.76.0 — 2026-09-22 — Type-C CabCon R2.0 hole-fill (CC shall-detect; VBUS from R2.5)
 
 USB Type-C Cable and Connector Specification Release 2.0 (August 2019) fills Source CC shall-detect voltages that R2.5 only illustrates as variance examples (Table 4-32 p.240: vRd 1.50 V, vOPEN 1.65 V, vRa 0.15 V). Type-C Current charger VBUS 4.75–5.5 V no-load / 4.0–5.5 V at 3 A, zOPEN 126 kΩ, tCCDebounce 100–200 ms, and tVBUSON 275 ms stay on newer CabCon R2.5 (Figure 4-39 / Tables 4-30, 4-32, 4-34). Rp/Rd/Ra unchanged. vSafe5V volt range still needs USB PD.

periscope/src/frontend/package.json

@@ -1,6 +1,6 @@
 {
   "name": "periscope-web",
-  "version": "2.76.0",
+  "version": "2.77.0",
   "private": true,
   "scripts": {
     "sync-version": "node scripts/sync-version.mjs",

tests/pcb/test_protocol_m6_m7.py

@@ -209,7 +209,7 @@ def test_mini_hdmi_is_connector_not_protocol_id():
 def test_ethernet_hdmi_skeletons_unknown_needed_document():
     cat = load_catalog()
     for lid in (
-        "10base-t", "1000base-t", "2.5gbase-t", "5gbase-t",
+        "1000base-t", "2.5gbase-t", "5gbase-t",
         "10gbase-t", "sgmii", "1000base-x", "10gbase-r",
         "hdmi-1.4", "hdmi-2.0", "hdmi-frl",
     ):

tests/pcb/test_protocol_pdf_pack.py

@@ -190,13 +190,23 @@ def test_ieee8023_section2_100base_tx_not_10base_or_1000():
     assert z.value_kind == "UNKNOWN"
     assert "TP-PMD" in (z.needed_document or "")
     ten = next(p for p in cat.physical_interfaces if p.id == "10base-t-mdi")
-    tdr = next(c for c in ten.constraints if c.parameter == "data_rate")
+    tby = {c.parameter: c for c in ten.constraints}
-    assert tdr.value_kind == "UNKNOWN"
+    _cite_ok(tby["data_rate"])
-    assert "Clause 14" in (tdr.needed_document or "")
+    assert tby["data_rate"].value == 10.0
+    assert tby["data_rate"].source.revision == "2015"
+    assert tby["data_rate"].source.section == "14.1.1"
+    assert tby["data_rate"].source.page == "374"
+    _cite_ok(tby["cable_channel"])
+    assert tby["cable_channel"].value == 100.0
+    assert tby["cable_channel"].source_type == "CABLE"
+    assert tby["cable_channel"].source.section == "14.4.2.2"
+    assert tby["differential_impedance"].value_kind == "UNKNOWN"
+    assert "PCB" in (tby["differential_impedance"].needed_document or "")
     gbe = next(p for p in cat.physical_interfaces if p.id == "1000base-t-mdi")
     gdr = next(c for c in gbe.constraints if c.parameter == "data_rate")
     assert gdr.value_kind == "UNKNOWN"
     assert "Clause 40" in (gdr.needed_document or "")
+    assert gdr.value is None
     fx = next(p for p in cat.physical_interfaces if p.id == "100base-fx-pcb")
     fxr = next(c for c in fx.constraints if c.parameter == "data_rate")
     _cite_ok(fxr)