Pins 1/2 and 3/4 were each defined at the exact same coordinates, so
the schematic showed a single stub per side instead of 4 distinct
pins. Spread them onto vertical buses per node (1-2 common, 3-4
common) while keeping the switch contact graphics unchanged.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TnzoFuRZAhRGeHAdz8UzR2
Import SnapEDA-sourced symbols/footprints/3D models for a handful of
power and LED parts. Also corrects the TS3425UA-3x4x2.5-160 tactile
switch: courtyard was undersized (used the simplified 4.2x3.4mm
headline package size instead of the full 5.2x3.35mm mechanical
envelope), datasheet/sourcing metadata was empty, and no 3D model was
present -- now verified against the official SHOUHAN/CAX mechanical
drawing and LCSC C51927439, with a real STEP body added.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GjmdnB2SyPYKHbSq9Lasmr
Symbol + footprint reconstructed from manvalan/DigiRadio's EasyEDA
project (same method as the FSC-BT1035 footprint), cross-checked
against the manufacturer datasheet found in that same project. The
datasheet's own circuit diagram shows two independent, mechanically
-ganged contact pairs (not a simple SPST), reproduced faithfully in
the symbol. Pin numbering preserved exactly as extracted, kept
internally consistent between symbol and footprint.
Self-contained KiCad library (symbols, footprints, 3D models, docs,
import/check tooling) with no dependency on kicad-personal-library.
- Fixed sym-lib-table/fp-lib-table: single (version 7) header, one entry
per library, MIKILAB_<name> nicknames, ${KIPRJMOD}-relative URIs
- Resolved the SOT95P280X145-5N footprint collision (TPS7A2012PDBVR vs
TPS7A2018PDBVR): confirmed byte-identical modulo KiCad's internal
tedit timestamp, unified into one shared footprint
- Resolved a case-insensitive filename collision between the official
Diode.kicad_sym and a custom diode.kicad_sym
- Wrapped standalone footprints (ESP32-S31-WROOM-3, IC_TPS63020DSJT,
SOT95P280X145-5N) into their own .pretty libraries so they're
actually registered in fp-lib-table
- Fixed broken symbol->footprint references (including one pointing at
a nonexistent easyeda2kicad library)
- Added scripts/check_library.py, import_component.py, add_component.py,
import_batch.py, and lib_common.py
micheleandClaude Sonnet 5