michele/FPGA-Neural
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Files
63cac6a7e5e0126bb13bea89dfe21966d5c9a1a5
FPGA-Neural/hardware/v1/tools/fpga_benchmark.py
T
micheleandClaude Sonnet 5 dc0b331d3e feat(v2): scaffold hardware/v1 frozen baseline + M1 Neural Processor 
Begins the V2 Neural Multiprocessor / Dataflow architecture per
docs/v2-description.md, per explicit user request to freeze V1 and
start V2 development, copying from V1 what's needed.

Scaffold:
- hardware/v1/: byte-exact, read-only copy of the current V1 codebase
  (rtl, testbenches, tools, constraints, a representative subset of
  synthesis results, and reference docs) -- verified identical via
  diff/cmp against the live top-level tree before being made
  filesystem-read-only. The live top-level tree is untouched and
  remains the project's "production" V1 (see hardware/v1/README.md
  and hardware/v2/logs/decisions.log DEC-0001 for why copy-not-move).
- hardware/v2/: mandatory structure (rtl/sim/constraints/synthesis/
  reports/scripts/logs/docs) plus the full logging system required by
  the spec (development/architecture/simulation/synthesis/timing/
  benchmark/decisions/experiments/errors.log).

M1 -- Neural Processor (hardware/v2/rtl/neural_processor.v):
- 8-stage pipelined perceptron unit (P_IN=8): input align, 8
  multipliers, 3-level adder tree, accumulator, bias+activation, INT8
  saturation. Genuine 1-tile/cycle throughput, not just a wider
  combinational datapath.
- 7-state FSM (NP_IDLE..NP_ERROR per docs/v2-description.md §6, with
  4 baseline states merged into NP_WAIT_OPERANDS -- see
  decisions.log DEC-0002); valid/ready/data/last stream interfaces
  per §7.
- Bit-exact vs the frozen hardware/v1/rtl/neuron_parallel.v + mac8.v
  + mac_unit.v: 7/7 tests pass (hardware/v2/sim/tb_neural_processor.v),
  covering regular/mixed-sign/extreme-INT8 vectors, both activations,
  a zero-idle-gap back-to-back-tiles throughput check, and an 8-tile
  job -- verified with Verilator (see below for why).
- Real synthesis + place&route (Yosys + nextpnr-ecp5): 0 CHECK
  problems, Fmax 183.12 MHz at ACC_WIDTH=32 (PASS at 80MHz, ~3x V1's
  isolated PARALLEL=8 Fmax of 61.71 MHz) and 176.21 MHz at ACC_WIDTH=24
  (a user-requested comparison experiment, also bit-exact-verified;
  see experiments.log EXP-0001/EXP-0002 and benchmark.log).

Three real bugs found and resolved during M1 development (full
diagnostic record in errors.log):
- Two independent, reproducible Icarus Verilog v13.0 scheduling
  defects (ERR-0001, ERR-0002) that silently produced wrong simulation
  results for standard sequential Verilog -- confirmed via Verilator
  5.050 giving correct results on the same minimal repros. Verilator
  is now the trusted simulator for hardware/v2/ (decisions.log
  DEC-0004); Icarus's affected protocol-violation check was removed
  from the RTL and deferred architecturally to the Neural Director
  (DEC-0003) rather than chased further.
- One real RTL bug (ERR-0003): last0 wasn't gated like valid0,
  letting a "last tile" tag leak into the pipeline ahead of its
  actual valid tile on back-to-back jobs. Fixed and verified.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013xXuuRUWZScuo1DeYJxs3v
2026-09-05 14:06:53 +02:00

1101 lines
22 KiB
Python
Executable File
Raw Blame History

#!/usr/bin/env python3
import csv
import json
import re
import subprocess
import sys
from pathlib import Path
# ============================================================
# PATHS
# ============================================================
ROOT = Path(__file__).resolve().parents[1]
RTL_DIR = ROOT / "rtl"
SYNTH_ROOT = ROOT / "synth" / "ecp5"
RESULT_ROOT = ROOT / "benchmark_results"
YOSYS = "/opt/homebrew/bin/yosys"
NEXTPNR = "/tmp/nextpnr/build/nextpnr-ecp5"
# ============================================================
# FPGA
# ============================================================
DEVICE = "LFE5U-45F-8BG381"
NEXT_PNR_DEVICE = "45k"
PACKAGE = "CABGA381"
SPEED_GRADE = "8"
TARGET_FREQ_MHZ = 80.0
# ============================================================
# NEURAL NETWORK
# ============================================================
DATA_WIDTH = 8
ACC_WIDTH = 32
N_INPUTS = 256
N_NEURONS = 4
PARALLELS = [8, 4, 2]
# ============================================================
# RTL
#
# Same source list as the validated ECP5 synthesis flow.
# ============================================================
RTL_FILES = [
RTL_DIR / "mac_unit.v",
RTL_DIR / "mac8.v",
RTL_DIR / "neuron_parallel.v",
RTL_DIR / "layer.v",
]
# ============================================================
# COMMAND
# ============================================================
def run_command(cmd, cwd=None, log_file=None):
print()
print("-" * 80)
print("COMMAND:")
print(" ".join(str(x) for x in cmd))
print("-" * 80)
result = subprocess.run(
[str(x) for x in cmd],
cwd=str(cwd) if cwd else None,
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT,
text=True,
)
output = result.stdout
if log_file is not None:
log_file.parent.mkdir(parents=True, exist_ok=True)
log_file.write_text(output)
print(output)
if result.returncode != 0:
raise RuntimeError(
f"Command failed with exit code {result.returncode}"
)
return output
# ============================================================
# CHECK TOOLS
# ============================================================
def check_tools():
if not Path(YOSYS).exists():
raise RuntimeError(f"Yosys not found: {YOSYS}")
if not Path(NEXTPNR).exists():
raise RuntimeError(f"nextpnr-ecp5 not found: {NEXTPNR}")
for path in RTL_FILES:
if not path.exists():
raise RuntimeError(f"RTL file not found: {path}")
# ============================================================
# GENERATE TOP
# ============================================================
def generate_top(parallel, top_v):
"""
Benchmark wrapper.
IMPORTANT:
- Do NOT expose x_bus / weights_bus / bias_bus as top-level I/O.
- The ECP5 has only 245 physical I/O.
- The neural-network vectors are generated internally.
- clk/reset/start remain real inputs so the sequential datapath
cannot be reduced to constants.
- y_bus is a real output so the result remains observable.
"""
x_bits = DATA_WIDTH * N_INPUTS
w_bits = DATA_WIDTH * N_INPUTS * N_NEURONS
b_bits = DATA_WIDTH * N_NEURONS
y_bits = DATA_WIDTH * N_NEURONS
text = f"""
module top #(
parameter DATA_WIDTH = {DATA_WIDTH},
parameter N_INPUTS = {N_INPUTS},
parameter N_NEURONS = {N_NEURONS},
parameter PARALLEL = {parallel},
parameter ACC_WIDTH = {ACC_WIDTH}
)(
input wire clk,
input wire rst,
input wire start,
output wire signed [{y_bits - 1}:0] y_bus,
output wire busy,
output wire done
);
localparam X_BITS = DATA_WIDTH * N_INPUTS;
localparam W_BITS = DATA_WIDTH * N_INPUTS * N_NEURONS;
localparam B_BITS = DATA_WIDTH * N_NEURONS;
/*
* Internal neural-network data.
*
* These are deliberately registers, not parameters/constants.
* This prevents the complete datapath from disappearing during
* synthesis.
*/
reg signed [X_BITS-1:0] x_bus;
reg signed [W_BITS-1:0] weights_bus;
reg signed [B_BITS-1:0] bias_bus;
integer i;
integer n;
/*
* Deterministic initialization.
*
* The actual datapath remains present because the vectors are
* stored in registers and loaded through the clocked process.
*/
always @(posedge clk) begin
if (rst) begin
x_bus <= '0;
weights_bus <= '0;
bias_bus <= '0;
end
else if (start) begin
/*
* INT8 input vector.
*
* Pattern:
* -16 ... +15
*/
for (i = 0; i < N_INPUTS; i = i + 1) begin
x_bus[i*DATA_WIDTH +: DATA_WIDTH]
<= ((i * 17 + 3) % 31) - 15;
end
/*
* INT8 weights.
*/
for (n = 0; n < N_NEURONS; n = n + 1) begin
for (i = 0; i < N_INPUTS; i = i + 1) begin
weights_bus[
(n*N_INPUTS+i)*DATA_WIDTH
+: DATA_WIDTH
]
<= ((n * 29 + i * 13 + 5) % 31) - 15;
end
end
/*
* INT8 biases.
*/
for (n = 0; n < N_NEURONS; n = n + 1) begin
bias_bus[
n*DATA_WIDTH
+: DATA_WIDTH
]
<= ((n * 7 + 1) % 9) - 4;
end
end
end
/*
* Real neural-network layer.
*/
layer #(
.DATA_WIDTH(DATA_WIDTH),
.N_INPUTS(N_INPUTS),
.N_NEURONS(N_NEURONS),
.PARALLEL(PARALLEL),
.ACC_WIDTH(ACC_WIDTH)
) dut (
.clk(clk),
.rst(rst),
.start(start),
.x_bus(x_bus),
.weights_bus(weights_bus),
.bias_bus(bias_bus),
.y_bus(y_bus),
.busy(busy),
.done(done)
);
endmodule
"""
top_v.parent.mkdir(parents=True, exist_ok=True)
top_v.write_text(text.strip() + "\n")
# ============================================================
# SYNTHESIS SCRIPT
# ============================================================
def generate_synth_script(top_v, synth_ys, top_json):
rtl_paths = [
str(path)
for path in RTL_FILES
]
lines = []
lines.append("read_verilog -sv \\")
for index, rtl in enumerate(rtl_paths):
lines.append(f"{rtl} \\")
lines.append(str(top_v))
lines.append("")
lines.append("hierarchy -top top")
lines.append("")
lines.append("proc")
lines.append("flatten")
lines.append("opt")
lines.append("memory")
lines.append("opt")
lines.append("techmap")
lines.append("opt")
lines.append("abc -g simple")
lines.append("clean")
lines.append("")
lines.append(
f'synth_ecp5 -top top -json {top_json}'
)
synth_ys.parent.mkdir(
parents=True,
exist_ok=True
)
synth_ys.write_text(
"\n".join(lines) + "\n"
)
# ============================================================
# LPF
# ============================================================
def generate_lpf(lpf):
"""
No physical pin constraints.
nextpnr will automatically place the small number of
top-level I/Os.
"""
lpf.parent.mkdir(
parents=True,
exist_ok=True
)
lpf.write_text("")
# ============================================================
# NEXTPNR
# ============================================================
def run_nextpnr(
top_json,
lpf,
config,
log
):
cmd = [
NEXTPNR,
f"--{NEXT_PNR_DEVICE}",
"--package",
PACKAGE,
"--speed",
SPEED_GRADE,
"--json",
str(top_json),
"--lpf",
str(lpf),
"--lpf-allow-unconstrained",
"--freq",
str(TARGET_FREQ_MHZ),
"--textcfg",
str(config),
]
return run_command(
cmd,
cwd=ROOT,
log_file=log
)
# ============================================================
# PARSER
# ============================================================
def parse_nextpnr_report(text):
# --------------------------------------------------------
# LUT4
# --------------------------------------------------------
lut_matches = re.findall(
r"Total LUT4s:\s*([0-9]+)\s*/",
text
)
lut4 = (
int(lut_matches[-1])
if lut_matches
else None
)
# --------------------------------------------------------
# DFF
# --------------------------------------------------------
ff_matches = re.findall(
r"Total DFFs:\s*([0-9]+)\s*/",
text
)
dff = (
int(ff_matches[-1])
if ff_matches
else None
)
# --------------------------------------------------------
# DSP
# --------------------------------------------------------
dsp_matches = re.findall(
r"MULT18X18D:\s*([0-9]+)\s*/",
text
)
dsp = (
int(dsp_matches[-1])
if dsp_matches
else None
)
# --------------------------------------------------------
# RAM
# --------------------------------------------------------
ram_matches = re.findall(
r"DP16KD:\s*([0-9]+)\s*/",
text
)
dp16kd = (
int(ram_matches[-1])
if ram_matches
else None
)
# --------------------------------------------------------
# IO
# --------------------------------------------------------
io_matches = re.findall(
r"TRELLIS_IO:\s*([0-9]+)\s*/",
text
)
io = (
int(io_matches[-1])
if io_matches
else None
)
# --------------------------------------------------------
# TRELLIS FF
# --------------------------------------------------------
trellis_ff_matches = re.findall(
r"TRELLIS_FF:\s*([0-9]+)\s*/",
text
)
trellis_ff = (
int(trellis_ff_matches[-1])
if trellis_ff_matches
else None
)
# --------------------------------------------------------
# TRELLIS COMB
# --------------------------------------------------------
trellis_comb_matches = re.findall(
r"TRELLIS_COMB:\s*([0-9]+)\s*/",
text
)
trellis_comb = (
int(trellis_comb_matches[-1])
if trellis_comb_matches
else None
)
# --------------------------------------------------------
# FMAX
#
# nextpnr can print more than one Fmax.
# The LAST one is the final post-route result.
# --------------------------------------------------------
freq_matches = re.findall(
r"Max frequency for clock .*?:\s*"
r"([0-9]+(?:\.[0-9]+)?)\s*MHz",
text
)
fmax = (
float(freq_matches[-1])
if freq_matches
else None
)
# --------------------------------------------------------
# LOGIC / ROUTING
#
# Again use the final occurrence.
# --------------------------------------------------------
timing_matches = re.findall(
r"([0-9]+(?:\.[0-9]+)?)\s*ns\s+logic,\s*"
r"([0-9]+(?:\.[0-9]+)?)\s*ns\s+routing",
text
)
if timing_matches:
logic_ns = float(
timing_matches[-1][0]
)
routing_ns = float(
timing_matches[-1][1]
)
else:
logic_ns = None
routing_ns = None
# --------------------------------------------------------
# TCRIT
# --------------------------------------------------------
if (
logic_ns is not None
and routing_ns is not None
):
tcrit_ns = (
logic_ns +
routing_ns
)
elif fmax is not None and fmax > 0:
tcrit_ns = 1000.0 / fmax
else:
tcrit_ns = None
return {
"lut4": lut4,
"ff": dff,
"dsp": dsp,
"dp16kd": dp16kd,
"io": io,
"trellis_ff": trellis_ff,
"trellis_comb": trellis_comb,
"fmax_mhz": fmax,
"logic_ns": logic_ns,
"routing_ns": routing_ns,
"tcrit_ns": tcrit_ns,
}
# ============================================================
# BENCHMARK ONE PARALLEL
# ============================================================
def benchmark_parallel(parallel):
print()
print("=" * 80)
print(f"BENCHMARK P = {parallel}")
print("=" * 80)
out_dir = (
SYNTH_ROOT /
f"p{parallel}"
)
out_dir.mkdir(
parents=True,
exist_ok=True
)
top_v = out_dir / "top.v"
synth_ys = out_dir / "synth.ys"
top_json = out_dir / "top.json"
lpf = out_dir / "top.lpf"
config = out_dir / "top.config"
yosys_log = out_dir / "yosys.log"
nextpnr_log = out_dir / "nextpnr.log"
# --------------------------------------------------------
# TOP
# --------------------------------------------------------
generate_top(
parallel,
top_v
)
# --------------------------------------------------------
# SYNTH SCRIPT
# --------------------------------------------------------
generate_synth_script(
top_v,
synth_ys,
top_json
)
# --------------------------------------------------------
# LPF
# --------------------------------------------------------
generate_lpf(lpf)
# --------------------------------------------------------
# YOSYS
# --------------------------------------------------------
run_command(
[
YOSYS,
"-s",
str(synth_ys)
],
cwd=ROOT,
log_file=yosys_log
)
if not top_json.exists():
raise RuntimeError(
f"Yosys did not generate {top_json}"
)
# --------------------------------------------------------
# NEXTPNR
# --------------------------------------------------------
output = run_nextpnr(
top_json,
lpf,
config,
nextpnr_log
)
# --------------------------------------------------------
# PARSE
# --------------------------------------------------------
metrics = parse_nextpnr_report(
output
)
# --------------------------------------------------------
# VALIDATION
# --------------------------------------------------------
required = [
"fmax_mhz",
"lut4",
"ff",
"dsp",
]
for key in required:
if metrics[key] is None:
raise RuntimeError(
f"Unable to parse {key} "
f"for P={parallel}"
)
# --------------------------------------------------------
# MAC COUNT
# --------------------------------------------------------
mac_total = (
N_NEURONS *
parallel
)
# --------------------------------------------------------
# THROUGHPUT
# --------------------------------------------------------
mac_per_sec = (
mac_total *
metrics["fmax_mhz"] *
1_000_000.0
)
mac_per_sec_m = (
mac_per_sec /
1_000_000.0
)
mac_per_sec_g = (
mac_per_sec /
1_000_000_000.0
)
# --------------------------------------------------------
# TARGET
# --------------------------------------------------------
pass_80 = (
metrics["fmax_mhz"] >=
TARGET_FREQ_MHZ
)
# --------------------------------------------------------
# RESULT
# --------------------------------------------------------
result = {
"fpga": DEVICE,
"package": PACKAGE,
"speed_grade": SPEED_GRADE,
"n_inputs": N_INPUTS,
"n_neurons": N_NEURONS,
"data_width": DATA_WIDTH,
"acc_width": ACC_WIDTH,
"parallel": parallel,
"mac": mac_total,
"fmax_mhz":
metrics["fmax_mhz"],
"lut4":
metrics["lut4"],
"ff":
metrics["ff"],
"dsp":
metrics["dsp"],
"dp16kd":
metrics["dp16kd"],
"io":
metrics["io"],
"trellis_ff":
metrics["trellis_ff"],
"trellis_comb":
metrics["trellis_comb"],
"logic_ns":
metrics["logic_ns"],
"routing_ns":
metrics["routing_ns"],
"tcrit_ns":
metrics["tcrit_ns"],
"mac_per_sec_m":
mac_per_sec_m,
"mac_per_sec_g":
mac_per_sec_g,
"pass_80mhz":
pass_80,
}
# --------------------------------------------------------
# PRINT
# --------------------------------------------------------
print()
print("RESULT")
print("-" * 50)
print(
f"PARALLEL : {parallel}"
)
print(
f"MAC : {mac_total}"
)
print(
f"Fmax : "
f"{metrics['fmax_mhz']:.2f} MHz"
)
print(
f"LUT4 : "
f"{metrics['lut4']}"
)
print(
f"DFF : "
f"{metrics['ff']}"
)
print(
f"DSP : "
f"{metrics['dsp']}"
)
if metrics["logic_ns"] is not None:
print(
f"Logic : "
f"{metrics['logic_ns']:.2f} ns"
)
if metrics["routing_ns"] is not None:
print(
f"Routing : "
f"{metrics['routing_ns']:.2f} ns"
)
if metrics["tcrit_ns"] is not None:
print(
f"Tcrit : "
f"{metrics['tcrit_ns']:.2f} ns"
)
print(
f"Throughput : "
f"{mac_per_sec_g:.3f} GMAC/s"
)
print(
f"80 MHz : "
f"{'PASS' if pass_80 else 'FAIL'}"
)
return result
# ============================================================
# WRITE RESULTS
# ============================================================
def write_results(results):
RESULT_ROOT.mkdir(
parents=True,
exist_ok=True
)
json_path = (
RESULT_ROOT /
"fpga_benchmark.json"
)
csv_path = (
RESULT_ROOT /
"fpga_benchmark.csv"
)
data = {
"benchmark": {
"fpga": DEVICE,
"package": PACKAGE,
"speed_grade": SPEED_GRADE,
"n_inputs": N_INPUTS,
"n_neurons": N_NEURONS,
"data_width": DATA_WIDTH,
"acc_width": ACC_WIDTH,
"target_freq_mhz":
TARGET_FREQ_MHZ,
"parallel_values":
PARALLELS,
},
"results": results,
}
json_path.write_text(
json.dumps(
data,
indent=2
)
)
fieldnames = list(
results[0].keys()
)
with csv_path.open(
"w",
newline=""
) as f:
writer = csv.DictWriter(
f,
fieldnames=fieldnames
)
writer.writeheader()
writer.writerows(results)
return (
json_path,
csv_path
)
# ============================================================
# SUMMARY
# ============================================================
def print_summary(results):
print()
print()
print("=" * 105)
print("FPGA-NEURAL BENCHMARK RESULTS")
print("=" * 105)
print(
f"{'FPGA':24}"
f"{'P':>4}"
f"{'MAC':>7}"
f"{'Fmax':>10}"
f"{'LUT':>8}"
f"{'FF':>8}"
f"{'DSP':>8}"
f"{'MAC/s':>14}"
f"{'80MHz':>9}"
)
print("-" * 105)
for r in results:
print(
f"{r['fpga']:24}"
f"{r['parallel']:>4}"
f"{r['mac']:>7}"
f"{r['fmax_mhz']:>9.2f}"
f"{r['lut4']:>8}"
f"{r['ff']:>8}"
f"{r['dsp']:>8}"
f"{r['mac_per_sec_g']:>12.3f}G"
f"{'PASS' if r['pass_80mhz'] else 'FAIL':>9}"
)
print("-" * 105)
best_fmax = max(
results,
key=lambda r:
r["fmax_mhz"]
)
best_throughput = max(
results,
key=lambda r:
r["mac_per_sec_g"]
)
print()
print(
"BEST FMAX: "
f"P={best_fmax['parallel']} "
f"-> "
f"{best_fmax['fmax_mhz']:.2f} MHz"
)
print(
"BEST THROUGHPUT: "
f"P={best_throughput['parallel']} "
f"-> "
f"{best_throughput['mac_per_sec_g']:.3f} GMAC/s"
)
print()
# ============================================================
# MAIN
# ============================================================
def main():
print()
print("=" * 80)
print("FPGA-NEURAL ECP5 PARAMETRIC BENCHMARK")
print("=" * 80)
print(
f"FPGA : {DEVICE}"
)
print(
f"Package : {PACKAGE}"
)
print(
f"Speed : -{SPEED_GRADE}"
)
print(
f"N_INPUTS : {N_INPUTS}"
)
print(
f"N_NEURONS : {N_NEURONS}"
)
print(
f"DATA_WIDTH : {DATA_WIDTH}"
)
print(
f"ACC_WIDTH : {ACC_WIDTH}"
)
print(
f"PARALLEL : {PARALLELS}"
)
print(
f"TARGET : "
f"{TARGET_FREQ_MHZ:.0f} MHz"
)
check_tools()
results = []
for parallel in PARALLELS:
result = benchmark_parallel(
parallel
)
results.append(result)
json_path, csv_path = (
write_results(results)
)
print_summary(results)
print(
f"JSON: {json_path}"
)
print(
f"CSV : {csv_path}"
)
# ============================================================
# ENTRY POINT
# ============================================================
if __name__ == "__main__":
try:
main()
except KeyboardInterrupt:
print(
"\nInterrupted."
)
sys.exit(130)
except Exception as e:
print()
print("=" * 80)
print("ERROR")
print("=" * 80)
print(str(e))
sys.exit(1)
Reference in New Issue View Git Blame Copy Permalink