feat: first genuine N=2 multi-core system verified against real DDR3 (EXP-0070)
Swapped mig_native_adapter.v + sdram_arbiter_n.v into the full N=2 system (neural_director_packed.v + 2x packed_slot.v), replacing the SDR SDRAM placeholder used since EXP-0057. Verified against the real Vivado-generated ddr3_model.sv end-to-end: 8/8 positions bit-exact against golden model, 0 errors, real JEDEC command traffic observed. This is the first fully real V3 system-level correctness result: real packed DSP cores + real weight-reuse scheduling + real N-way arbitration + real DDR3 timing, all verified together. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MUG92aM9m68TRc4rG55BcC
This commit is contained in:
Claude Sonnet 5
@@ -0,0 +1,462 @@
|
||||
`timescale 1ps/100fs
|
||||
|
||||
// ============================================================
|
||||
// MILESTONE: the full N=2 multi-core system (EXP-0066/0067, real
|
||||
// neural_director_packed.v + 2 real packed_slot.v instances + real
|
||||
// sdram_arbiter_n.v) running against REAL DDR3 (mig_native_adapter.v,
|
||||
// EXP-0068, verified against MIG's own ddr3_model.sv) instead of the
|
||||
// SDR SDRAM placeholder used everywhere until now.
|
||||
//
|
||||
// Runs entirely in the ui_clk domain (MIG's own generated clock is
|
||||
// now this whole system's clock, per mig_native_adapter.v's own
|
||||
// documented convention). Everything downstream of the memory
|
||||
// backend (Director, packed_slot, weight-reuse path, packed core) is
|
||||
// UNCHANGED, byte-for-byte, from EXP-0066/0067 -- only the physical
|
||||
// memory backend is swapped, isolating that as the one variable
|
||||
// under test.
|
||||
//
|
||||
// Activation stand-in (see packed_slot.v's own header) is unchanged
|
||||
// too -- still a disclosed, separate gap, not addressed here.
|
||||
//
|
||||
// Uses mig_7series_0_mig_sim (SIM_BYPASS_INIT_CAL="FAST" default,
|
||||
// EXP-0068's own real vendor-shipped fast-calibration simulation
|
||||
// variant), real ddr3_model.sv, real WireDelay pass-through -- same
|
||||
// proven instantiation pattern as tb_mig_native_adapter.v.
|
||||
// ============================================================
|
||||
module tb;
|
||||
localparam CLKIN_PERIOD = 3225; // ps, this project's real MIG config
|
||||
localparam REFCLK_FREQ = 200.0; // MHz
|
||||
localparam real REFCLK_PERIOD = (1000000.0/(2*REFCLK_FREQ));
|
||||
localparam RESET_PERIOD = 200000; // ps
|
||||
|
||||
localparam DATA_WIDTH = 8;
|
||||
localparam P_IN = 8;
|
||||
localparam ACC_WIDTH = 32;
|
||||
localparam ADDR_WIDTH = 26; // this project's byte-address convention (Director/packed_slot)
|
||||
localparam MIG_ADDR_WIDTH = 25; // word-address convention (BURST_LEN=8) at the arbiter/adapter
|
||||
localparam BURST_LEN = 8;
|
||||
localparam N_INPUTS = 128;
|
||||
localparam N_TILES = N_INPUTS/P_IN;
|
||||
localparam LAYER_BYTES = N_INPUTS;
|
||||
localparam WORDS_PER_LAYER = LAYER_BYTES/2;
|
||||
localparam N_SLOTS = 2;
|
||||
localparam QUEUE_DEPTH = 8;
|
||||
|
||||
localparam L = 2; // layers (kept small -- real DDR3 calibration + JEDEC timing already
|
||||
localparam M = 4; // costs real simulated time; this is an integration check, not a
|
||||
// repeat of EXP-0066's own fuller correctness sweep)
|
||||
|
||||
// ---- clock/reset (mirrors tb_mig_native_adapter.v's own proven pattern) ----
|
||||
reg sys_rst_n;
|
||||
wire sys_rst = sys_rst_n;
|
||||
reg sys_clk_i = 1'b0;
|
||||
always #(CLKIN_PERIOD/2.0) sys_clk_i = ~sys_clk_i;
|
||||
reg clk_ref_i = 1'b0;
|
||||
always #REFCLK_PERIOD clk_ref_i = ~clk_ref_i;
|
||||
initial begin
|
||||
sys_rst_n = 1'b0;
|
||||
#RESET_PERIOD sys_rst_n = 1'b1;
|
||||
end
|
||||
|
||||
// ---- real DDR3 pins + model (identical to tb_mig_native_adapter.v) ----
|
||||
wire ddr3_reset_n;
|
||||
wire [15:0] ddr3_dq_fpga;
|
||||
wire [1:0] ddr3_dqs_p_fpga, ddr3_dqs_n_fpga;
|
||||
wire [13:0] ddr3_addr_fpga;
|
||||
wire [2:0] ddr3_ba_fpga;
|
||||
wire ddr3_ras_n_fpga, ddr3_cas_n_fpga, ddr3_we_n_fpga;
|
||||
wire [0:0] ddr3_cke_fpga, ddr3_ck_p_fpga, ddr3_ck_n_fpga, ddr3_cs_n_fpga;
|
||||
wire [1:0] ddr3_dm_fpga;
|
||||
wire [0:0] ddr3_odt_fpga;
|
||||
|
||||
wire [15:0] ddr3_dq_sdram;
|
||||
reg [13:0] ddr3_addr_sdram;
|
||||
reg [2:0] ddr3_ba_sdram;
|
||||
reg ddr3_ras_n_sdram, ddr3_cas_n_sdram, ddr3_we_n_sdram;
|
||||
wire [0:0] ddr3_cs_n_sdram;
|
||||
wire [0:0] ddr3_odt_sdram;
|
||||
reg [0:0] ddr3_cke_sdram;
|
||||
wire [1:0] ddr3_dm_sdram;
|
||||
wire [1:0] ddr3_dqs_p_sdram, ddr3_dqs_n_sdram;
|
||||
reg [0:0] ddr3_ck_p_sdram, ddr3_ck_n_sdram;
|
||||
reg [0:0] ddr3_cs_n_sdram_tmp;
|
||||
reg [1:0] ddr3_dm_sdram_tmp;
|
||||
reg [0:0] ddr3_odt_sdram_tmp;
|
||||
|
||||
always @(*) begin
|
||||
ddr3_ck_p_sdram <= ddr3_ck_p_fpga;
|
||||
ddr3_ck_n_sdram <= ddr3_ck_n_fpga;
|
||||
ddr3_addr_sdram <= ddr3_addr_fpga;
|
||||
ddr3_ba_sdram <= ddr3_ba_fpga;
|
||||
ddr3_ras_n_sdram <= ddr3_ras_n_fpga;
|
||||
ddr3_cas_n_sdram <= ddr3_cas_n_fpga;
|
||||
ddr3_we_n_sdram <= ddr3_we_n_fpga;
|
||||
ddr3_cke_sdram <= ddr3_cke_fpga;
|
||||
end
|
||||
always @(*) ddr3_cs_n_sdram_tmp <= ddr3_cs_n_fpga;
|
||||
assign ddr3_cs_n_sdram = ddr3_cs_n_sdram_tmp;
|
||||
always @(*) ddr3_dm_sdram_tmp <= ddr3_dm_fpga;
|
||||
assign ddr3_dm_sdram = ddr3_dm_sdram_tmp;
|
||||
always @(*) ddr3_odt_sdram_tmp <= ddr3_odt_fpga;
|
||||
assign ddr3_odt_sdram = ddr3_odt_sdram_tmp;
|
||||
|
||||
genvar dqwd;
|
||||
generate
|
||||
for (dqwd = 0; dqwd < 16; dqwd = dqwd + 1) begin : dq_delay
|
||||
WireDelay #(.Delay_g(0.00), .Delay_rd(0.00), .ERR_INSERT("OFF")) u_delay_dq (
|
||||
.A(ddr3_dq_fpga[dqwd]), .B(ddr3_dq_sdram[dqwd]),
|
||||
.reset(sys_rst_n), .phy_init_done(init_calib_complete)
|
||||
);
|
||||
end
|
||||
endgenerate
|
||||
genvar dqswd;
|
||||
generate
|
||||
for (dqswd = 0; dqswd < 2; dqswd = dqswd + 1) begin : dqs_delay
|
||||
WireDelay #(.Delay_g(0.00), .Delay_rd(0.00), .ERR_INSERT("OFF")) u_delay_dqs_p (
|
||||
.A(ddr3_dqs_p_fpga[dqswd]), .B(ddr3_dqs_p_sdram[dqswd]),
|
||||
.reset(sys_rst_n), .phy_init_done(init_calib_complete)
|
||||
);
|
||||
WireDelay #(.Delay_g(0.00), .Delay_rd(0.00), .ERR_INSERT("OFF")) u_delay_dqs_n (
|
||||
.A(ddr3_dqs_n_fpga[dqswd]), .B(ddr3_dqs_n_sdram[dqswd]),
|
||||
.reset(sys_rst_n), .phy_init_done(init_calib_complete)
|
||||
);
|
||||
end
|
||||
endgenerate
|
||||
|
||||
ddr3_model u_ddr3 (
|
||||
.rst_n(ddr3_reset_n), .ck(ddr3_ck_p_sdram), .ck_n(ddr3_ck_n_sdram),
|
||||
.cke(ddr3_cke_sdram[0]), .cs_n(ddr3_cs_n_sdram[0]),
|
||||
.ras_n(ddr3_ras_n_sdram), .cas_n(ddr3_cas_n_sdram), .we_n(ddr3_we_n_sdram),
|
||||
.dm_tdqs(ddr3_dm_sdram), .ba(ddr3_ba_sdram), .addr(ddr3_addr_sdram),
|
||||
.dq(ddr3_dq_sdram), .dqs(ddr3_dqs_p_sdram), .dqs_n(ddr3_dqs_n_sdram),
|
||||
.tdqs_n(), .odt(ddr3_odt_sdram[0])
|
||||
);
|
||||
|
||||
wire [27:0] app_addr;
|
||||
wire [2:0] app_cmd;
|
||||
wire app_en, app_rdy;
|
||||
wire [63:0] app_wdf_data;
|
||||
wire app_wdf_end;
|
||||
wire [7:0] app_wdf_mask;
|
||||
wire app_wdf_wren, app_wdf_rdy;
|
||||
wire [63:0] app_rd_data;
|
||||
wire app_rd_data_end, app_rd_data_valid;
|
||||
wire ui_clk, ui_clk_sync_rst, init_calib_complete;
|
||||
|
||||
mig_7series_0_mig #(
|
||||
.SIM_BYPASS_INIT_CAL("FAST")
|
||||
) u_mig (
|
||||
.ddr3_dq(ddr3_dq_fpga), .ddr3_dqs_n(ddr3_dqs_n_fpga), .ddr3_dqs_p(ddr3_dqs_p_fpga),
|
||||
.ddr3_addr(ddr3_addr_fpga), .ddr3_ba(ddr3_ba_fpga),
|
||||
.ddr3_ras_n(ddr3_ras_n_fpga), .ddr3_cas_n(ddr3_cas_n_fpga), .ddr3_we_n(ddr3_we_n_fpga),
|
||||
.ddr3_reset_n(ddr3_reset_n),
|
||||
.ddr3_ck_p(ddr3_ck_p_fpga), .ddr3_ck_n(ddr3_ck_n_fpga),
|
||||
.ddr3_cke(ddr3_cke_fpga), .ddr3_cs_n(ddr3_cs_n_fpga),
|
||||
.ddr3_dm(ddr3_dm_fpga), .ddr3_odt(ddr3_odt_fpga),
|
||||
.sys_clk_i(sys_clk_i), .clk_ref_i(clk_ref_i),
|
||||
.app_addr(app_addr), .app_cmd(app_cmd), .app_en(app_en),
|
||||
.app_wdf_data(app_wdf_data), .app_wdf_end(app_wdf_end),
|
||||
.app_wdf_mask(app_wdf_mask), .app_wdf_wren(app_wdf_wren),
|
||||
.app_rd_data(app_rd_data), .app_rd_data_end(app_rd_data_end),
|
||||
.app_rd_data_valid(app_rd_data_valid), .app_rdy(app_rdy), .app_wdf_rdy(app_wdf_rdy),
|
||||
.app_sr_req(1'b0), .app_ref_req(1'b0), .app_zq_req(1'b0),
|
||||
.app_sr_active(), .app_ref_ack(), .app_zq_ack(),
|
||||
.ui_clk(ui_clk), .ui_clk_sync_rst(ui_clk_sync_rst),
|
||||
.init_calib_complete(init_calib_complete),
|
||||
.device_temp(),
|
||||
.sys_rst(sys_rst)
|
||||
);
|
||||
|
||||
// ---- preload path: direct access to mig_native_adapter.v,
|
||||
// bypassing the arbiter, exactly like every prior testbench's own
|
||||
// "pre_active" mux (EXP-0057 onward) -- used only before job
|
||||
// submission begins. ----
|
||||
reg pre_active;
|
||||
reg pre_req, pre_wr;
|
||||
reg [MIG_ADDR_WIDTH-1:0] pre_addr;
|
||||
reg [16*BURST_LEN-1:0] pre_wdata;
|
||||
|
||||
wire adp_req, adp_wr;
|
||||
wire [MIG_ADDR_WIDTH-1:0] adp_addr;
|
||||
wire [16*BURST_LEN-1:0] adp_wdata;
|
||||
wire [2*BURST_LEN-1:0] adp_wmask;
|
||||
wire [16*BURST_LEN-1:0] adp_rdata;
|
||||
wire adp_ready, adp_busy;
|
||||
|
||||
wire arb_ctrl_req_o, arb_ctrl_wr_o;
|
||||
wire [MIG_ADDR_WIDTH-1:0] arb_ctrl_addr_o;
|
||||
wire [16*BURST_LEN-1:0] arb_ctrl_wdata_o;
|
||||
wire [2*BURST_LEN-1:0] arb_ctrl_wmask_o;
|
||||
|
||||
assign adp_req = pre_active ? pre_req : arb_ctrl_req_o;
|
||||
assign adp_wr = pre_active ? pre_wr : arb_ctrl_wr_o;
|
||||
assign adp_addr = pre_active ? pre_addr : arb_ctrl_addr_o;
|
||||
assign adp_wdata = pre_active ? pre_wdata : arb_ctrl_wdata_o;
|
||||
assign adp_wmask = pre_active ? {(2*BURST_LEN){1'b0}} : arb_ctrl_wmask_o;
|
||||
|
||||
mig_native_adapter #(.BURST_LEN(BURST_LEN), .ADDR_WIDTH(MIG_ADDR_WIDTH)) u_adapter (
|
||||
.clk(ui_clk), .rst(ui_clk_sync_rst),
|
||||
.req(adp_req), .wr(adp_wr), .addr(adp_addr), .wdata(adp_wdata), .wmask(adp_wmask),
|
||||
.rdata(adp_rdata), .ready(adp_ready), .busy(adp_busy),
|
||||
.app_addr(app_addr), .app_cmd(app_cmd), .app_en(app_en), .app_rdy(app_rdy),
|
||||
.app_wdf_data(app_wdf_data), .app_wdf_end(app_wdf_end), .app_wdf_mask(app_wdf_mask),
|
||||
.app_wdf_wren(app_wdf_wren), .app_wdf_rdy(app_wdf_rdy),
|
||||
.app_rd_data(app_rd_data), .app_rd_data_end(app_rd_data_end), .app_rd_data_valid(app_rd_data_valid)
|
||||
);
|
||||
|
||||
function automatic signed [7:0] weight_byte(input integer li, input integer t);
|
||||
weight_byte = $signed(8'((li*17 + t*29 + 13) & 8'hFF));
|
||||
endfunction
|
||||
function automatic signed [7:0] input_byte(input integer li, input integer pos, input integer t);
|
||||
input_byte = $signed(8'((li*11 + pos*41 + t*7 + 3) & 8'hFF));
|
||||
endfunction
|
||||
|
||||
task automatic sdram_write_burst(input [MIG_ADDR_WIDTH-1:0] word_addr, input [16*BURST_LEN-1:0] data);
|
||||
begin
|
||||
@(posedge ui_clk); while (adp_busy) @(posedge ui_clk);
|
||||
pre_req = 1'b1; pre_wr = 1'b1; pre_addr = word_addr; pre_wdata = data;
|
||||
@(posedge ui_clk); pre_req = 1'b0;
|
||||
while (!adp_ready) @(posedge ui_clk);
|
||||
end
|
||||
endtask
|
||||
|
||||
task automatic preload_sdram_layers;
|
||||
integer li, bi, wb, tt;
|
||||
reg [16*BURST_LEN-1:0] burst_data;
|
||||
begin
|
||||
for (li = 0; li < L; li = li + 1) begin
|
||||
for (bi = 0; bi < (LAYER_BYTES/(2*BURST_LEN)); bi = bi + 1) begin
|
||||
for (wb = 0; wb < BURST_LEN; wb = wb + 1) begin
|
||||
tt = bi*(2*BURST_LEN) + wb*2;
|
||||
burst_data[wb*16 +: 16] = {weight_byte(li, tt+1), weight_byte(li, tt)};
|
||||
end
|
||||
sdram_write_burst((li*WORDS_PER_LAYER + bi*BURST_LEN), burst_data);
|
||||
end
|
||||
end
|
||||
end
|
||||
endtask
|
||||
|
||||
function automatic signed [DATA_WIDTH*P_IN-1:0] act_lookup(input [ADDR_WIDTH-1:0] addr);
|
||||
integer li_d, pos_d, tidx_d, k;
|
||||
reg signed [DATA_WIDTH*P_IN-1:0] r;
|
||||
begin
|
||||
li_d = addr / 100000;
|
||||
pos_d = (addr / 1000) % 100;
|
||||
tidx_d = addr % 1000;
|
||||
for (k = 0; k < P_IN; k = k + 1)
|
||||
r[k*DATA_WIDTH +: DATA_WIDTH] = input_byte(li_d, pos_d, tidx_d*P_IN + k);
|
||||
act_lookup = r;
|
||||
end
|
||||
endfunction
|
||||
|
||||
// ---- neural_director_packed.v ----
|
||||
reg job_in_valid;
|
||||
wire job_in_ready;
|
||||
reg [ADDR_WIDTH-1:0] job_in_x_base, job_in_w_base, job_in_result_addr;
|
||||
reg [15:0] job_in_n_tiles, job_in_node_id;
|
||||
|
||||
wire [N_SLOTS-1:0] slot_job_start;
|
||||
wire [ADDR_WIDTH*N_SLOTS-1:0] slot_x_base_a, slot_x_base_b, slot_w_base;
|
||||
wire [ADDR_WIDTH*N_SLOTS-1:0] slot_result_addr_a, slot_result_addr_b;
|
||||
wire [16*N_SLOTS-1:0] slot_n_tiles, slot_node_id_a, slot_node_id_b;
|
||||
wire [N_SLOTS-1:0] slot_job_done;
|
||||
wire job_out_done;
|
||||
wire [$clog2(N_SLOTS)-1:0] job_out_slot;
|
||||
wire [3:0] dir_state;
|
||||
wire dir_error;
|
||||
|
||||
neural_director_packed #(
|
||||
.ADDR_WIDTH(ADDR_WIDTH), .N_SLOTS(N_SLOTS), .QUEUE_DEPTH(QUEUE_DEPTH)
|
||||
) u_dir (
|
||||
.clk(ui_clk), .rst(ui_clk_sync_rst),
|
||||
.job_in_valid(job_in_valid), .job_in_ready(job_in_ready),
|
||||
.job_in_x_base(job_in_x_base), .job_in_w_base(job_in_w_base),
|
||||
.job_in_n_tiles(job_in_n_tiles), .job_in_result_addr(job_in_result_addr),
|
||||
.job_in_node_id(job_in_node_id),
|
||||
.slot_job_start(slot_job_start),
|
||||
.slot_x_base_a(slot_x_base_a), .slot_x_base_b(slot_x_base_b),
|
||||
.slot_w_base(slot_w_base), .slot_n_tiles(slot_n_tiles),
|
||||
.slot_result_addr_a(slot_result_addr_a), .slot_result_addr_b(slot_result_addr_b),
|
||||
.slot_node_id_a(slot_node_id_a), .slot_node_id_b(slot_node_id_b),
|
||||
.slot_job_done(slot_job_done),
|
||||
.job_out_done(job_out_done), .job_out_slot(job_out_slot),
|
||||
.dir_state(dir_state), .dir_error(dir_error)
|
||||
);
|
||||
|
||||
// ---- 2 real packed_slot.v instances + real N-way arbiter (NUM_REQ=2) ----
|
||||
wire [1:0] mem_active, mem_grant;
|
||||
wire [1:0] s_ctrl_req, s_ctrl_wr;
|
||||
wire [1:0] s_ctrl_ready, s_ctrl_busy;
|
||||
wire [MIG_ADDR_WIDTH*2-1:0] s_ctrl_addr_flat;
|
||||
wire [16*BURST_LEN*2-1:0] s_ctrl_wdata_flat, s_ctrl_rdata_flat;
|
||||
wire [2*BURST_LEN*2-1:0] s_ctrl_wmask_flat;
|
||||
|
||||
sdram_arbiter_n #(.NUM_REQ(2), .ADDR_WIDTH(MIG_ADDR_WIDTH), .BURST_LEN(BURST_LEN)) u_arb (
|
||||
.clk(ui_clk), .rst(ui_clk_sync_rst),
|
||||
.req_active(mem_active), .req_grant(mem_grant),
|
||||
.req_req(s_ctrl_req), .req_wr(s_ctrl_wr), .req_addr(s_ctrl_addr_flat),
|
||||
.req_wdata(s_ctrl_wdata_flat), .req_wmask(s_ctrl_wmask_flat),
|
||||
.req_rdata(s_ctrl_rdata_flat), .req_ready(s_ctrl_ready), .req_busy(s_ctrl_busy),
|
||||
.ctrl_req(arb_ctrl_req_o), .ctrl_wr(arb_ctrl_wr_o), .ctrl_addr(arb_ctrl_addr_o),
|
||||
.ctrl_wdata(arb_ctrl_wdata_o), .ctrl_wmask(arb_ctrl_wmask_o),
|
||||
.ctrl_rdata(adp_rdata), .ctrl_ready(adp_ready), .ctrl_busy(adp_busy)
|
||||
);
|
||||
|
||||
genvar gi;
|
||||
generate
|
||||
for (gi = 0; gi < N_SLOTS; gi = gi + 1) begin : GEN_SLOT
|
||||
wire signed [DATA_WIDTH-1:0] res_a, res_b;
|
||||
wire [15:0] res_nid_a, res_nid_b;
|
||||
wire [ADDR_WIDTH-1:0] res_addr_a_out, res_addr_b_out;
|
||||
wire [ADDR_WIDTH-1:0] act_addr_a, act_addr_b;
|
||||
wire signed [DATA_WIDTH*P_IN-1:0] act_data_a, act_data_b;
|
||||
|
||||
assign act_data_a = act_lookup(act_addr_a);
|
||||
assign act_data_b = act_lookup(act_addr_b);
|
||||
|
||||
packed_slot #(
|
||||
.DATA_WIDTH(DATA_WIDTH), .P_IN(P_IN), .ACC_WIDTH(ACC_WIDTH),
|
||||
.BURST_LEN(BURST_LEN), .ADDR_WIDTH(ADDR_WIDTH), .LAYER_BYTES(LAYER_BYTES)
|
||||
) u_slot (
|
||||
.clk(ui_clk), .rst(ui_clk_sync_rst),
|
||||
.job_start(slot_job_start[gi]),
|
||||
.x_base_a(slot_x_base_a[gi*ADDR_WIDTH +: ADDR_WIDTH]),
|
||||
.x_base_b(slot_x_base_b[gi*ADDR_WIDTH +: ADDR_WIDTH]),
|
||||
.w_base(slot_w_base[gi*ADDR_WIDTH +: ADDR_WIDTH]),
|
||||
.n_tiles(slot_n_tiles[gi*16 +: 16]),
|
||||
.result_addr_a(slot_result_addr_a[gi*ADDR_WIDTH +: ADDR_WIDTH]),
|
||||
.result_addr_b(slot_result_addr_b[gi*ADDR_WIDTH +: ADDR_WIDTH]),
|
||||
.node_id_a(slot_node_id_a[gi*16 +: 16]), .node_id_b(slot_node_id_b[gi*16 +: 16]),
|
||||
.job_done(slot_job_done[gi]),
|
||||
.result_data_a(res_a), .result_data_b(res_b),
|
||||
.result_node_id_a(res_nid_a), .result_node_id_b(res_nid_b),
|
||||
.result_addr_a_out(res_addr_a_out), .result_addr_b_out(res_addr_b_out),
|
||||
.mem_active(mem_active[gi]), .mem_grant(mem_grant[gi]),
|
||||
.act_tile_addr_a(act_addr_a), .act_tile_addr_b(act_addr_b),
|
||||
.act_tile_data_a(act_data_a), .act_tile_data_b(act_data_b),
|
||||
.ctrl_req(s_ctrl_req[gi]), .ctrl_wr(s_ctrl_wr[gi]),
|
||||
.ctrl_addr(s_ctrl_addr_flat[gi*MIG_ADDR_WIDTH +: MIG_ADDR_WIDTH]),
|
||||
.ctrl_wdata(s_ctrl_wdata_flat[gi*16*BURST_LEN +: 16*BURST_LEN]),
|
||||
.ctrl_wmask(s_ctrl_wmask_flat[gi*2*BURST_LEN +: 2*BURST_LEN]),
|
||||
.ctrl_rdata(s_ctrl_rdata_flat[gi*16*BURST_LEN +: 16*BURST_LEN]),
|
||||
.ctrl_ready(s_ctrl_ready[gi]), .ctrl_busy(s_ctrl_busy[gi])
|
||||
);
|
||||
end
|
||||
endgenerate
|
||||
|
||||
integer errors, tests, completions, n_expected, si;
|
||||
reg [15:0] expect_node [0:31];
|
||||
reg signed [7:0] expect_val [0:31];
|
||||
|
||||
function automatic signed [7:0] golden_result(input integer li, input integer pos);
|
||||
integer t, acc;
|
||||
reg signed [7:0] r;
|
||||
begin
|
||||
acc = 0;
|
||||
for (t = 0; t < N_INPUTS; t = t + 1)
|
||||
acc = acc + (input_byte(li, pos, t) * weight_byte(li, t));
|
||||
if (acc <= 0) r = 0; else if (acc > 127) r = 8'sd127; else r = acc[7:0];
|
||||
golden_result = r;
|
||||
end
|
||||
endfunction
|
||||
|
||||
task automatic check_completion(input integer slot, input [15:0] nid, input signed [7:0] val);
|
||||
integer idx, found;
|
||||
begin
|
||||
found = 0;
|
||||
for (idx = 0; idx < n_expected; idx = idx + 1) begin
|
||||
if (expect_node[idx] === nid && !found) begin
|
||||
found = 1;
|
||||
tests = tests + 1;
|
||||
if (expect_val[idx] !== val) begin
|
||||
$display("FAIL slot=%0d node_id=%0d: got=%0d expected=%0d", slot, nid, $signed(val), $signed(expect_val[idx]));
|
||||
errors = errors + 1;
|
||||
end else begin
|
||||
$display("PASS slot=%0d node_id=%0d: result=%0d", slot, nid, $signed(val));
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
endtask
|
||||
|
||||
always @(posedge ui_clk) begin
|
||||
if (!ui_clk_sync_rst) begin
|
||||
for (si = 0; si < N_SLOTS; si = si + 1) begin
|
||||
if (slot_job_done[si]) begin
|
||||
completions = completions + 2;
|
||||
case (si)
|
||||
0: begin
|
||||
check_completion(0, GEN_SLOT[0].u_slot.result_node_id_a, GEN_SLOT[0].u_slot.result_data_a);
|
||||
check_completion(0, GEN_SLOT[0].u_slot.result_node_id_b, GEN_SLOT[0].u_slot.result_data_b);
|
||||
end
|
||||
1: begin
|
||||
check_completion(1, GEN_SLOT[1].u_slot.result_node_id_a, GEN_SLOT[1].u_slot.result_data_a);
|
||||
check_completion(1, GEN_SLOT[1].u_slot.result_node_id_b, GEN_SLOT[1].u_slot.result_data_b);
|
||||
end
|
||||
endcase
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
task automatic submit_job(
|
||||
input [ADDR_WIDTH-1:0] xb, input [ADDR_WIDTH-1:0] wb,
|
||||
input [15:0] nt, input [ADDR_WIDTH-1:0] resaddr, input [15:0] nid
|
||||
);
|
||||
begin
|
||||
@(posedge ui_clk);
|
||||
job_in_x_base = xb; job_in_w_base = wb; job_in_n_tiles = nt;
|
||||
job_in_result_addr = resaddr; job_in_node_id = nid;
|
||||
job_in_valid = 1'b1;
|
||||
while (!job_in_ready) @(posedge ui_clk);
|
||||
@(posedge ui_clk);
|
||||
job_in_valid = 1'b0;
|
||||
end
|
||||
endtask
|
||||
|
||||
integer li_i, pp_i, wd;
|
||||
|
||||
initial begin
|
||||
errors = 0; tests = 0; completions = 0; n_expected = 0;
|
||||
pre_active = 1'b1; pre_req = 0; pre_wr = 0; pre_addr = 0; pre_wdata = 0;
|
||||
job_in_valid = 0; job_in_x_base = 0; job_in_w_base = 0;
|
||||
job_in_n_tiles = 0; job_in_result_addr = 0; job_in_node_id = 0;
|
||||
|
||||
$display("=== waiting for real DDR3 init_calib_complete ===");
|
||||
wait (init_calib_complete);
|
||||
$display("=== calibration done at time %0t ===", $time);
|
||||
repeat (10) @(posedge ui_clk);
|
||||
|
||||
$display("=== preload SDRAM with %0d resident-filter weight sets ===", L);
|
||||
preload_sdram_layers;
|
||||
@(posedge ui_clk);
|
||||
pre_active = 1'b0;
|
||||
repeat (5) @(posedge ui_clk);
|
||||
|
||||
$display("=== N=2 system on REAL DDR3: submitting %0d layers x %0d positions ===", L, M);
|
||||
for (li_i = 0; li_i < L; li_i = li_i + 1) begin
|
||||
for (pp_i = 0; pp_i < M; pp_i = pp_i + 1) begin
|
||||
submit_job(li_i*100000 + pp_i*1000, li_i*WORDS_PER_LAYER, N_TILES[15:0],
|
||||
26'h9000 + li_i*10 + pp_i, (li_i*M + pp_i));
|
||||
expect_node[n_expected] = (li_i*M + pp_i);
|
||||
expect_val[n_expected] = golden_result(li_i, pp_i);
|
||||
n_expected = n_expected + 1;
|
||||
end
|
||||
end
|
||||
|
||||
wd = 0;
|
||||
while (completions < n_expected && wd < 200000) begin
|
||||
@(posedge ui_clk);
|
||||
wd = wd + 1;
|
||||
end
|
||||
|
||||
if (completions < n_expected) begin
|
||||
$display("FAIL: only %0d/%0d position-results completed within watchdog", completions, n_expected);
|
||||
errors = errors + 1;
|
||||
end
|
||||
|
||||
$display("=== %0d/%0d tests, %0d errors, %0d/%0d positions completed ===", tests-errors, tests, errors, completions, n_expected);
|
||||
if (errors == 0 && completions == n_expected) $display("ALL TESTS PASSED (tb_n2_system_ddr3, REAL DDR3)");
|
||||
$finish;
|
||||
end
|
||||
endmodule
|
||||
Reference in New Issue
Block a user