Root cause of FM/DAB "stonata" audio: xtalCtun=31/nominal XTAL_FREQ defaults were never measured against this board's actual crystal (Abracon ABM8-19.200MHZ-10-1-U-T, CL=10pF, two external 15pF load caps). Fixed via CTUN trim by ear (31->0) plus a new live calibration loop that reads the Si4684's own FM_RSQ FREQOFF field (broadcast carriers are GPS-locked, so it's a free precision frequency reference) to trim XTAL_FREQ with no lab equipment. Converged to CTUN=0, XTAL_FREQ=19199750 Hz, residual -3/-4 ppm cross-checked on two stations. New tools/infrastructure (kept, not one-off): - Si4684Driver::recalibrateXtal() + POST /api/tuner/xtal-calibrate: live crystal re-trim without an ESP32 reflash. - FM_RSQ FREQOFF exposed as "freqoff_ppm" in GET /api/tuner/status. - tools/si4684_xtal_calibration.py: automates the trim loop. - tools/si4684_antenna_calibration.py: AN851 Appendix A ANTCAP/VARM/VARB sweep tool (same session, separate calibration). - CONFIG_ESP32_I2S_TEST_TONE (off by default): isolates Si4684-specific audio issues from shared-downstream ones by writing a tone directly over the I2S bus the Si4684 also uses. - SIGMA_WRITE_REGISTER_BLOCK/sigma_safeload_block now retry on NACK and verify via read-back instead of firing I2C writes blind. - FM de-emphasis set to European 50us (was left at the US 75us default). - DAB_ACF_ENABLE restored to its previous 0x0000 with a citation explaining why (tested the datasheet default of 0x0003, made things audibly worse). See docs/si4684-rf-investigation-report.md's 2026-08-23 entry for the full elimination chain and docs/TODO.md for follow-up work (persisting calibration results to EEPROM instead of requiring a firmware edit). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
41 lines
1.1 KiB
C++
41 lines
1.1 KiB
C++
/**
|
|
* @file antenna_calibration.cpp
|
|
* @brief net::AntennaCalibration implementation over HardwareBootstrap.
|
|
*
|
|
* DigiRadio firmware — https://github.com/manvalan/DigiRadio
|
|
*
|
|
* Copyright 2026 Michele Bigi
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include "antenna_calibration.hpp"
|
|
|
|
#include "hardware_bootstrap.hpp"
|
|
#include "si4684/Si4684Tuner.hpp"
|
|
|
|
namespace antenna_calibration {
|
|
|
|
namespace {
|
|
|
|
/** Diagnostic-only, 2026-08-23: see net::AntennaCalibration::recalibrateXtal. */
|
|
bool recalibrateXtal(std::uint8_t ibias, std::uint8_t ctun,
|
|
std::uint32_t xtalFreqHz)
|
|
{
|
|
return static_cast<bool>(hardware::HardwareBootstrap::si4684Tuner()
|
|
.recalibrateXtal(ibias, ctun, xtalFreqHz));
|
|
}
|
|
|
|
} // namespace
|
|
|
|
net::AntennaCalibration& bridge() noexcept
|
|
{
|
|
static net::AntennaCalibration instance{
|
|
.save = &hardware::HardwareBootstrap::saveFmAntCapCalibration,
|
|
.saveDab = &hardware::HardwareBootstrap::saveDabAntCapCalibration,
|
|
.recalibrateXtal = &recalibrateXtal,
|
|
};
|
|
return instance;
|
|
}
|
|
|
|
} // namespace antenna_calibration
|