micheleandClaude Sonnet 5
f610121fd3
Confirmed live tonight that the Si4684's automatic front-end tuning (FE_VARM/VARB properties) is measurably suboptimal on this board: a 129-value ANTCAP sweep (0-128, AN851 Appendix A) at four different FM frequencies found antcap=102 beats auto-tune by +6 to +11 dB RSSI and +3 to +11 dB SNR everywhere tested, consistent with the front-end network component mismatch already logged in docs/si4684-rf-investigation-report.md — the board's actual matching network differs from the AN851 reference network those auto-tune constants were derived from, so a fixed empirical override compensates for a gap the chip's own algorithm can't see. Wiring, bottom to top: - Si4684Driver::tuneFm() already took an antCap byte; threaded it through core::ITuner::tuneFm() and si4684::Si4684Tuner::tuneFm() as a new parameter (default 0 = auto, unchanged behaviour for every existing caller). - TunerService::tuneFm() takes an optional override instead: omitted, it falls back to a new defaultFmAntCap_ member so every ordinary FM tune (seek, scan, station recall, live UI) benefits automatically once calibrated, not just calls that pass antcap explicitly. - POST /api/tuner/tune gained an optional "antcap" field for sweeping live without touching the saved calibration. - POST /api/tuner/calibrate-antenna commits a sweep result: writes it to the 24AA025E48 EEPROM's user-writable region (word address 0x00, separate from the factory-locked EUI-48 at 0xFA-0xFF) via a new Eeprom24aa::writeFmAntCap()/readFmAntCap() pair, and immediately updates the live TunerService default — no reboot needed to take effect, though HardwareBootstrap::boot() also loads it at every boot so it survives power cycles. Same net::AntennaCalibration function-pointer bridge pattern as PhoneStreamSink/BleProvisioning, so components/net stays free of eeprom24aa headers. Verified end to end on hardware: swept and found 102, saved it via the new endpoint, confirmed the live default changed immediately, then power-cycled and confirmed the boot log reports "FM ANTCAP calibration loaded: 102" and a subsequent default tune reflects it. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
29 lines
769 B
C++
29 lines
769 B
C++
/**
|
|
* @file antenna_calibration.hpp
|
|
* @brief net::AntennaCalibration implementation over HardwareBootstrap.
|
|
*
|
|
* DigiRadio firmware — https://github.com/manvalan/DigiRadio
|
|
*
|
|
* Copyright 2026 Michele Bigi
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#pragma once
|
|
|
|
#include "net/SetupWebServer.hpp"
|
|
|
|
namespace antenna_calibration {
|
|
|
|
/**
|
|
* @brief bridge — the process-lifetime AntennaCalibration instance.
|
|
*
|
|
* @dname bridge
|
|
* @return Function-pointer table bound to
|
|
* HardwareBootstrap::saveFmAntCapCalibration, for
|
|
* net::HttpRouteContext::antennaCalibration /
|
|
* POST /api/tuner/calibrate-antenna.
|
|
* @pubstate none
|
|
*/
|
|
[[nodiscard]] net::AntennaCalibration& bridge() noexcept;
|
|
|
|
} // namespace antenna_calibration
|