# DigiRadio
### DAB+/FM Bluetooth Receiver with SigmaDSP Audio Processing
**Open-source digital radio — Si4684 tuner · ADAU1701 SigmaDSP · Bluetooth aptX Adaptive · ESP32-S3**
[](Software/LICENSE)
---
## Overview
**DigiRadio** is an open-source digital radio receiver that combines terrestrial
broadcast reception (**DAB+ / DAB / FM**) with a programmable audio-processing
stage and high-quality **Bluetooth** audio output.
Incoming broadcast audio is decoded by a Silicon Labs **Si4684** digital-radio
receiver, processed by an Analog Devices **ADAU1701 SigmaDSP** (equalisation,
mixing, level control), and transmitted over Bluetooth by a Qualcomm QCC3056-based
**Feasycom FSC-BT1035** module supporting the **aptX Adaptive** codec. An Espressif
**ESP32-S3** acts as the host controller, orchestrating the three subsystems and
providing Wi-Fi connectivity, encrypted credential storage, and a browser-based
configuration UI.
The entire tuner → DSP → Bluetooth path is **fully digital (I²S, 48 kHz / 24-bit)** —
no analogue conversions are introduced between the tuner and the wireless link.
```
FM/DAB antenna → [ Si4684 ] --I²S--> [ ADAU1701 DSP ] --I²S--> [ FSC-BT1035 ] → aptX
↑ ↑ ↑
└──── SPI ──── [ ESP32-S3 host ] ──── UART ────┘
│ I²C
Wi-Fi · NVS · HTTP UI
```
---
## Key Features
### Hardware
- **DAB+ / DAB / FM** reception (Si4684) via external whip antenna (SMA)
- **Fully digital audio path** — no avoidable A/D–D/A conversions
- **Programmable audio processing** on the ADAU1701 SigmaDSP
- **Bluetooth 5.2** output with **aptX / aptX HD / aptX Adaptive**
- **ESP32-S3** host with native USB, Wi-Fi and BLE
- **USB-C powered**; single-rail 3.3 V + low-noise 1.8 V for the tuner
- **6-layer impedance-controlled PCB**, 50 × 90 mm, two ground planes
- Three antennas (ESP32 2.4 GHz, BT1035 2.4 GHz, FM/DAB SMA) with proper keep-outs
### Firmware (ESP-IDF, C++23 — fw **0.8.2**)
| Area | Capability |
|------|------------|
| **Boot & chips** | Si4684 DAB+FM firmware load (HOST_LOAD blobs), ADAU1701 RAM program at every boot, BT1035 UART init |
| **Tuner** | FM tune/seek, DAB ensemble tune, service scan & play, RSQ/RDS, DAB event status |
| **Now playing** | FM RDS (PS, RadioText, PI, PTY) and DAB Dynamic Label (DLS) in status JSON and web UI |
| **Audio** | 5-band EQ, input mixer, stereo/bass enhancement overlays, profile persist in NVS |
| **Presets** | Station list CRUD, reorder, recall with audio profile re-apply, last-preset restore at boot |
| **Bluetooth** | Discoverable pairing, A2DP status, disconnect |
| **Network** | SoftAP setup mode, STA provisioning, tabbed gzipped SPA (`/`), typed JSON REST API |
| **Security** | NVS-backed credential and preset storage (flash encryption planned — see roadmap) |
| **Quality** | **13** host unit tests, Doxygen gate, LaTeX manual sync check, GitHub Actions CI on `main` |
Architecture follows a **functional core + imperative shell**: pure domain logic
(compilation, JSON, EQ design, RDS/DLS parsing) runs on the host under `ctest`;
drivers and FreeRTOS live in thin ESP-IDF components. See [`Software/AGENTS.md`](Software/AGENTS.md).
---
## Firmware Progress
Vertical slices landed on `main` (newest first):
| Version | Highlights |
|---------|------------|
| **0.8.2** | Tabbed configuration Web UI — now-playing, 6-band EQ, full API coverage |
| **0.8.1** | `IntegrationService` — boot preset recall, tune orchestration (tuner + audio + NVS `last_preset`); services stub removed |
| **0.8.0** | Preset reorder API/UI; broadcast metadata (RDS + DAB DLS); `readDabServiceData` driver path |
| **0.7.1** | CI workflow (host tests, Doxygen, manual sync); Doxygen warnings cleared |
| **0.7.0** | Station presets (NVS `station_list`), BT1035 pairing, full `/api/stations/*` |
| **0.5–0.6** | ADAU1701 runtime EQ/mixer, Si4684 tuning & DAB service list, BT1035 driver |
| **0.3–0.4** | Secure store, Wi-Fi provisioning, companion-chip boot, walking skeleton |
**Next up** ([`Software/docs/TODO.md`](Software/docs/TODO.md)): NVS/flash encryption (T8).
---
## Repository Structure
```
DigiRadio/
├── .github/workflows/ CI — host tests, Doxygen, manual class sync
├── Hardware/
│ ├── schematics/ Schematic (PDF)
│ ├── gerber/ Gerber + drill (fabrication)
│ ├── bom/ Bill of Materials
│ ├── pick-and-place/ CPL / centroid
│ ├── easyeda/ EasyEDA source
│ └── 3d/ Renders / STEP
├── Software/ Firmware project root — open this in Cursor
│ ├── AGENTS.md Authoritative coding rules for agents
│ ├── instructions.md Agent kickoff & slice roadmap
│ ├── Doxyfile API documentation gate
│ ├── components/
│ │ ├── core/ Pure domain (host-tested, no ESP-IDF)
│ │ ├── drivers/ Si4684, ADAU1701, BT1035
│ │ ├── services/ Tuner, audio, Bluetooth, station, integration
│ │ ├── secure_store/ NVS wrappers (Wi-Fi, profiles, presets)
│ │ └── net/ Wi-Fi, HTTP server, gzipped web UI
│ ├── docs/
│ │ ├── manual/ LaTeX technical manual (canonical)
│ │ └── TODO.md Prioritised firmware backlog
│ ├── Firmware/ Si4684 blobs + ADAU1701 SigmaStudio export
│ ├── main/ app_main, hardware bootstrap
│ └── tools/ Manual sync checker, Si4684 blob helpers
├── CONTRIBUTING.md
├── LICENSE CERN-OHL-S v2 (hardware)
└── README.md ← you are here
```
Build the manual from `Software/docs/manual/`:
```bash
cd Software/docs/manual && latexmk -lualatex manual.tex
```
---
## Getting Started
### Firmware (developers)
Open **`Software/`** as the Cursor project so `AGENTS.md` and `.cursor/rules/` load.
```bash
cd Software
idf.py set-target esp32s3
idf.py build
idf.py -p flash monitor
```
Host unit tests (no hardware):
```bash
cd Software
cmake -S components/core/test -B build-host \
-DCMAKE_CXX_COMPILER="$(brew --prefix llvm)/bin/clang++" # macOS
cmake --build build-host
ctest --test-dir build-host --output-on-failure
```
Quality gates (also enforced in CI):
```bash
cd Software
doxygen Doxyfile
python3 tools/check-manual-sync.py
```
Full build notes, API table, and component map: [`Software/README.md`](Software/README.md).
### First boot (device)
1. Power the board; ESP32 starts **SoftAP** setup mode (`DigiRadio-setup` — see manual).
2. Connect and open the gzipped web UI or call `GET /api/health`.
3. `POST /api/wifi` with STA credentials; device reboots into normal mode.
4. Tune via `/api/tuner/*`, manage presets via `/api/stations/*`, pair BT via `/api/bluetooth/*`.
Schemas, error tokens, and boot flow: [`Software/docs/manual/ch-api.tex`](Software/docs/manual/ch-api.tex).
---
## HTTP API (summary)
| Method | Path | Purpose |
|--------|------|---------|
| GET | `/api/health` | Status, firmware version, companion-chip flags |
| POST | `/api/wifi` | Provision STA credentials |
| GET | `/api/tuner/status` | Tuner snapshot incl. RDS/DLS metadata |
| GET | `/api/tuner/services` | DAB service list |
| POST | `/api/tuner/tune` · `/play` · `/seek` | Tuner control |
| GET/PUT | `/api/audio/profile` | ADAU1701 mixer + EQ |
| POST | `/api/audio/reset` · `/stereo-enhance` · `/bass-enhance` | Audio overlays |
| GET | `/api/bluetooth/status` | BT1035 state |
| POST | `/api/bluetooth/pair` · `/pair/stop` · `/disconnect` | Bluetooth control |
| GET/POST | `/api/stations` · `/remove` · `/reorder` · `/tune` | Preset list & recall |
Generated C++ API reference: run `doxygen Doxyfile` → `Software/docs/api/html/index.html`.
---
## Design Highlights
| Topic | Choice | Rationale |
|---|---|---|
| **Audio quality** | QCC3056 / aptX Adaptive | Codec dominates wireless quality; DAC lives in the sink |
| **Audio path** | Fully digital I²S | Avoids unnecessary A/D–D/A between tuner and Bluetooth |
| **I²S master** | ADAU1701 (12.288 MHz) | Clean ×256 → 48 kHz; avoids sample-rate mismatch |
| **Firmware style** | C++23, `std::expected`, RAII | Typed errors, host-testable core, no primitive obsession |
| **Stack-up** | 6-layer, 2× GND | Solid ground under RF, crystals and USB |
| **USB routing** | TOP, ref. GND | 90 Ω diff at manufacturable geometry |
| **Antennas** | 3 zones, diagonal 2.4 GHz | Coexistence separation + full-layer keep-outs |
---
## Status
| Layer | State |
|-------|--------|
| **Schematic** | Complete and reviewed |
| **PCB layout** | 6-layer, DRC clean, plane continuity verified |
| **BOM** | Finalised (manufacturable / sourced) |
| **Prototype** | In fabrication (PCBWay) |
| **Firmware** | **0.8.2** on `main` — CI green; full Web UI, integration, RDS/DLS |
| **Web UI** | Tabbed SPA covering every REST endpoint |
| **Production hardening** | Si4684 blob policy (T7), NVS encryption (T8) — open |
Agent task list: [`Software/docs/TODO.md`](Software/docs/TODO.md).
---
## Manufacturing
The board is manufactured with **PCBWay** as a 6-layer, impedance-controlled PCB
with turnkey assembly. The FSC-BT1035 Bluetooth module is sourced from Feasycom
(the footprint uses a BT806-compatible, pin-identical land pattern). See the
[Technical Manual](Software/docs/manual/manual.tex) hardware chapter and manufacturing
notes for fabrication settings and MSL-3 handling of the BT module.
---
## License
- **Hardware** (schematics, PCB, Gerbers, BOM): CERN-OHL-S v2 — see [`LICENSE`](LICENSE)
- **Firmware / Software**: Apache-2.0 — see [`Software/LICENSE`](Software/LICENSE)
- **Documentation**: CC BY 4.0
Intellectual property of the design remains with the author. You are free to study,
modify and build the hardware under the terms of the respective licenses.
---
## Author
**Michele Bigi** — Open-source hardware project.
*Contributions, issues and questions are welcome via the [issue tracker](https://github.com/manvalan/DigiRadio/issues).*