Implements GET /api/audio/levels, reading all six 1×RTA level-detector
cells on demand (no background polling, no caching -- only runs when
called, per explicit request this session).
The read mechanism is the ADAU1701's documented Data Capture Register
(address 2074/0x081A, datasheet Rev.0 pp.30,36: write a (program-step,
register-select) pair to configure what the register mirrors, then
read back a 3-byte 5.19 twos-complement value). The per-meter program-
step indices are taken verbatim from SigmaStudio's own compiler output
(Firmware/ADAU1701-Firmware/IC 1_DigiRadioFinale/net_list_out2/
trap.dat), not invented -- the datasheet explicitly says these indices
must come from that compiler-generated file.
Confirmed live: all six points return distinct, plausible dBFS values,
and the output meters track a master-volume change.
Also folds two pieces of live user feedback into the app brief: the
volume slider should reach +12 dB (the firmware's real ceiling), not
stop at 0 dB, and the new levels endpoint is what a "VU meter" UI
section should poll instead of faking one.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Bass Boost1/SPhat1 enhancement blocks
Replaces the 74-parameter ADAU1701 program with the new 224-parameter
SigmaStudio export. The new netlist has no mixer -- MX1 is an
exclusive selector (DC1) passing through exactly one of three stereo
pairs (radio/bluetooth/beep) instead of blending them with independent
gains. core::MixSource/MixerState are gone; core::ActiveSource plus
IDsp::selectSource() replace applyMixer()/setInputVolume() throughout
the driver/service/API stack. AudioProfile.mixer -> activeSource;
the HTTP "mixer" JSON object -> a single "active_source" string.
DC1 turned out to need a raw 32-bit integer (0/1/2), not the 5.23
fixpoint its compiled TYPE_DC1 macro implies -- confirmed live by
writing both encodings and listening for which one actually switched
sources. Documented in Adau1701Driver::selectSource() and
adau1701::paramSourceIndex().
Bass Boost1 and SPhat1 are real ADI algorithm blocks in this revision,
so core::applyEnhancementsToEq() (the old EQ-band-overwrite hack for
bass/stereo enhancement) is deleted; IDsp::setBassBoostLevel()/
setStereoSpreadLevel() scale each block's compiled coefficients toward
identity/unity instead. Confirmed live: Bass Boost audible on real
program content (not a static test tone -- the algorithm is dynamics-
based), Stereo Spread audible but subtle. The EQ "locked" flag from
2026-08-24 (enhancements silently overwriting manually-set bands) no
longer applies to bands 1-5.
A full sweep of all 223 non-DC1 named parameters (writing each back to
its own compiled default) completed with zero failures, confirming the
whole new address space is reachable.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The 2026-08-16 IBP=1 override (commit 6974095) was applied alongside a
separate, simultaneous fix to Si4684's PIN_CONFIG_ENABLE and credited
with turning static into audible music. SerialInputRegister (0x081F) is
a single register shared by every SDATA_INx pin on the ADAU1701, so the
override also applied to the ESP32 streaming input, not just Si4684's.
Live A/B testing today (DAB, FM, and ESP32 web-radio, all isolated via
mixer gain, with and without ADAU1701 DSP bypass, with and without BT
A2DP codec changes) narrowed the hiss to this one shared register.
Removing the override and leaving IBP at its compiled default (0x00)
resolved the hiss on both the Si4684 and ESP32 paths, confirmed by ear.
Also:
- Add a runtime HTTP API (GET/POST /api/bluetooth/a2dp-codec) to change
the BT1035 A2DP codec bitmask without reflashing, used to rule out
AAC/SBC codec choice as a contributing cause.
- Extend the ADAU1701 boot-time EQ diagnostic to read back all 6 bands
(previously band 0 only) using the correct 5.23 fixed-point format.
- Note EEPROM persistence for ANTCAP/crystal calibration as TODO.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Root cause of FM/DAB "stonata" audio: xtalCtun=31/nominal XTAL_FREQ
defaults were never measured against this board's actual crystal
(Abracon ABM8-19.200MHZ-10-1-U-T, CL=10pF, two external 15pF load
caps). Fixed via CTUN trim by ear (31->0) plus a new live calibration
loop that reads the Si4684's own FM_RSQ FREQOFF field (broadcast
carriers are GPS-locked, so it's a free precision frequency reference)
to trim XTAL_FREQ with no lab equipment. Converged to CTUN=0,
XTAL_FREQ=19199750 Hz, residual -3/-4 ppm cross-checked on two
stations.
New tools/infrastructure (kept, not one-off):
- Si4684Driver::recalibrateXtal() + POST /api/tuner/xtal-calibrate:
live crystal re-trim without an ESP32 reflash.
- FM_RSQ FREQOFF exposed as "freqoff_ppm" in GET /api/tuner/status.
- tools/si4684_xtal_calibration.py: automates the trim loop.
- tools/si4684_antenna_calibration.py: AN851 Appendix A ANTCAP/VARM/VARB
sweep tool (same session, separate calibration).
- CONFIG_ESP32_I2S_TEST_TONE (off by default): isolates Si4684-specific
audio issues from shared-downstream ones by writing a tone directly
over the I2S bus the Si4684 also uses.
- SIGMA_WRITE_REGISTER_BLOCK/sigma_safeload_block now retry on NACK and
verify via read-back instead of firing I2C writes blind.
- FM de-emphasis set to European 50us (was left at the US 75us default).
- DAB_ACF_ENABLE restored to its previous 0x0000 with a citation
explaining why (tested the datasheet default of 0x0003, made things
audibly worse).
See docs/si4684-rf-investigation-report.md's 2026-08-23 entry for the
full elimination chain and docs/TODO.md for follow-up work (persisting
calibration results to EEPROM instead of requiring a firmware edit).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
New core::IDsp::writeRawParam(address, value) safeloads any named
Parameter RAM cell in the compiled SigmaStudio program (74 cells: mixer/
Beep1/PEQ coefficients/limiter thresholds/etc — the same set SigmaStudio's
own Remote Connection, components/net/SigmaStudioTcpServer, already has
full access to). Value is a plain SigmaStudio floating coefficient,
converted to ADAU 8.23 fixpoint via the existing core::floatToFixpoint823.
Adau1701ParamTable.hpp holds the name->address table extracted from
Firmware/ADAU1701-Firmware/DigiRadio_IC_1_PARAM.h; core::DspParamJson
handles the wire format without core/ depending on the adau1701 driver
(net/SetupWebServer.cpp bridges the two, consistent with how other
JSON DTOs are supplied their data by the net layer).
GET /api/dsp/params lists every cell (name + address) for discovery.
PUT /api/dsp/param {"name":...,"value":...} writes one. Deliberately no
domain validation, matching the trust level already implied by the
existing SigmaStudio TCP bridge being reachable on the same network.
HTTP routes were registered in the SetupWebServer.cpp change committed
alongside the FM band scan feature (3a10ed7).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
Two independent bugs silenced the digital audio path from Si4684 into the
ADAU1701 even after the FM/DAB tune fix produced a real RF lock:
1. Si4684Driver::configureAfterBoot() wrote PIN_CONFIG_ENABLE (0x0800) as
0x0003, enabling both I2SOUTEN and DACOUTEN. AN649: "only I2SOUTEN or
DACOUTEN can be enabled at a time. If both enabled, only analog audio
output is enabled" — the chip silently fell back to its unused analog
DAC output on every boot. Fixed to 0x8002 (I2SOUTEN + INTBOUTEN),
matching the value hitech95/si468x_dab_receiver's working ALSA codec
driver uses (SI468X_PROP_I2S_ENABLED); I2SOUTEN alone (0x0002) was not
sufficient on this hardware. Also fixed AUDIO_OUTPUT_CONFIG (0x0302),
which was being written with a stray I2S-enable bit that property does
not have (its only real field is bit0 MONO).
2. Even with the chip correctly outputting I2S, the ADAU1701 received only
static. Traced with SIGMA_WRITE_REGISTER_BLOCK live overrides of
SerialInputRegister (0x081F, baked into the compiled SigmaStudio export
at ILP=0/IBP=0): IBP=1 (input data clocked on the opposite BCLK edge)
produced real, recognizable music instead of static on a locked, strong
FM signal — first confirmed end-to-end audio in this project's history.
ILP=1 made it worse and was reverted; IBP=1 kept as a runtime override
in Adau1701Driver::boot().
Remaining noise on top of the music is attributed to antenna quality
(RSSI/SNR fluctuated significantly between retunes of the same station on
the current improvised antenna) — not yet confirmed with a proper antenna.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
- Add docs/si4684-rf-investigation-report.md: full record of the FM/DAB no-lock
investigation (crystal, front-end matching, ANTCAP sweep, continuity, leading
EP solder-defect hypothesis, PCBWay report sent) plus the separate audio
profile NVS bug found and partially fixed this session.
- Fix sigma_i2c_write() (SigmaStudioFW.c): no retry on I2C failure meant a single
transient NACK anywhere in a long safeload burst (EQ apply = ~55 sequential
transactions) aborted the whole sequence. Added a 3-attempt retry.
- Add granular failure logging (AudioService::applyProfileToDsp/persistProfile,
Adau1701Driver::applyMixer/applyEq, NvsAudioProfileStore::saveProfile error
codes) to isolate the remaining NVS-side audio profile save failure.
- Si4684Driver::tuneFm gains an optional ANTCAP argument (default 0 = unchanged
auto-tune behavior) used during this session's front-end matching sweep.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Streaming (main feature this session):
- New WebRadioConfig/WebRadioJson core types, ISecureStore-backed persistence
- New webradio::WebRadioService (thread-safe live config) + GET/POST /api/streaming
- web_radio_stream task now runtime-toggleable (no reboot), no hardcoded URL
- Content-Type diagnostic: warns clearly when a URL is a webpage, not an audio stream
Boot cleanup:
- Removed boot-time auto FM/DAB tune, auto-beep, and the (now-concluded) Si4684
crystal IBIAS/CTUN empirical sweep from main.cpp — tuning/beep are on-demand
via the existing REST API only
Web UI:
- Modernized styling (cards, gradients, toggle switches, light/dark theme)
- New Stream tab wired to /api/streaming
Fixes found via real idf.py build (not just clangd):
- Restored wrongly-removed si4684/Si4684Tuner.hpp include in main.cpp
- Fixed MP3Decode() argument types in web_radio_stream.cpp (unsigned char**/int*)
Quality-gate fixes:
- Host-test stub headers (esp_log.h, freertos/*) so TunerService.cpp's
scanForStation logging/pacing compiles for station_service_test /
integration_service_test instead of running stale binaries
- Added WifiScanner and WebRadioService manual sections; filled in missing
Doxygen docs on BluetoothService, i2s_sdata_probe, test_firmware, Bt1035At
- Ignore clangd's .cache/ index directory
Also includes prior uncommitted work carried in the tree: Wi-Fi/Bluetooth
device scan REST API and UI (WifiScanner, BT scan), SigmaStudio TCP bridge,
and the current ADAU1701 SigmaStudio DSP program export.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Decouple the SigmaStudio RAM download from compiled-in adau1701_program.c:
DRAD v1 blobs in the dsp partition with embedded fallback, POST /api/dsp/program,
and host-tested blob parse/serialize helpers.
Co-authored-by: Cursor <cursoragent@cursor.com>
Read the factory 24AA025E48 serial after ADAU I2C boot, derive SoftAP SSID, BT name, STA hostname, and expose serialNumber on GET /api/health with graceful fallbacks.
Co-authored-by: Cursor <cursoragent@cursor.com>
Document the ADAU1701 schematic chain (sigma-chain.jpg), cross-link from
hardware/firmware chapters, skip safeload on fixed high-pass band 0, and
match EqProfile default peaking frequencies to SigmaStudio.
Co-authored-by: Cursor <cursoragent@cursor.com>
Safeload mixer/EQ/master on the ADAU1701, persist AudioProfile in NVS,
expose /api/audio routes and web UI controls, with host tests and manual sync.
Co-authored-by: Cursor <cursoragent@cursor.com>
Implement ESP-IDF walking skeleton with SoftAP, health API, and host
tests, then Slice 2 ISecureStore/NvsSecureStore, STA join, POST
/api/wifi, and the provisioning web UI.
Co-authored-by: Cursor <cursoragent@cursor.com>
micheleandClaude Sonnet 5