Confirmed live tonight that the Si4684's automatic front-end tuning
(FE_VARM/VARB properties) is measurably suboptimal on this board: a
129-value ANTCAP sweep (0-128, AN851 Appendix A) at four different FM
frequencies found antcap=102 beats auto-tune by +6 to +11 dB RSSI and
+3 to +11 dB SNR everywhere tested, consistent with the front-end
network component mismatch already logged in
docs/si4684-rf-investigation-report.md — the board's actual matching
network differs from the AN851 reference network those auto-tune
constants were derived from, so a fixed empirical override
compensates for a gap the chip's own algorithm can't see.
Wiring, bottom to top:
- Si4684Driver::tuneFm() already took an antCap byte; threaded it
through core::ITuner::tuneFm() and si4684::Si4684Tuner::tuneFm() as
a new parameter (default 0 = auto, unchanged behaviour for every
existing caller).
- TunerService::tuneFm() takes an optional override instead: omitted,
it falls back to a new defaultFmAntCap_ member so every ordinary FM
tune (seek, scan, station recall, live UI) benefits automatically
once calibrated, not just calls that pass antcap explicitly.
- POST /api/tuner/tune gained an optional "antcap" field for sweeping
live without touching the saved calibration.
- POST /api/tuner/calibrate-antenna commits a sweep result: writes it
to the 24AA025E48 EEPROM's user-writable region (word address 0x00,
separate from the factory-locked EUI-48 at 0xFA-0xFF) via a new
Eeprom24aa::writeFmAntCap()/readFmAntCap() pair, and immediately
updates the live TunerService default — no reboot needed to take
effect, though HardwareBootstrap::boot() also loads it at every
boot so it survives power cycles. Same net::AntennaCalibration
function-pointer bridge pattern as PhoneStreamSink/BleProvisioning,
so components/net stays free of eeprom24aa headers.
Verified end to end on hardware: swept and found 102, saved it via
the new endpoint, confirmed the live default changed immediately,
then power-cycled and confirmed the boot log reports "FM ANTCAP
calibration loaded: 102" and a subsequent default tune reflects it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
New core::IDsp::writeRawParam(address, value) safeloads any named
Parameter RAM cell in the compiled SigmaStudio program (74 cells: mixer/
Beep1/PEQ coefficients/limiter thresholds/etc — the same set SigmaStudio's
own Remote Connection, components/net/SigmaStudioTcpServer, already has
full access to). Value is a plain SigmaStudio floating coefficient,
converted to ADAU 8.23 fixpoint via the existing core::floatToFixpoint823.
Adau1701ParamTable.hpp holds the name->address table extracted from
Firmware/ADAU1701-Firmware/DigiRadio_IC_1_PARAM.h; core::DspParamJson
handles the wire format without core/ depending on the adau1701 driver
(net/SetupWebServer.cpp bridges the two, consistent with how other
JSON DTOs are supplied their data by the net layer).
GET /api/dsp/params lists every cell (name + address) for discovery.
PUT /api/dsp/param {"name":...,"value":...} writes one. Deliberately no
domain validation, matching the trust level already implied by the
existing SigmaStudio TCP bridge being reachable on the same network.
HTTP routes were registered in the SetupWebServer.cpp change committed
alongside the FM band scan feature (3a10ed7).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
New TunerService::scanFullFmBand(): tunes to the band bottom then seeks up
repeatedly (reusing the existing hardware-seek + RDS-name-poll machinery
from scanForStation()) until the sweep wraps back around, collecting every
station that clears the existing scan RSSI/SNR thresholds. Returns the
list without touching saved presets or leaving the tuner in any particular
place — callers decide what to do with the results.
New POST /api/tuner/scan/full endpoint (core::TunerFmScannedStation DTO,
serializeTunerFmBandScanJson). Blocks for the whole sweep like the existing
/api/tuner/scan.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0178rASQ6ZETPMUamvpoR2KR
- Add docs/si4684-rf-investigation-report.md: full record of the FM/DAB no-lock
investigation (crystal, front-end matching, ANTCAP sweep, continuity, leading
EP solder-defect hypothesis, PCBWay report sent) plus the separate audio
profile NVS bug found and partially fixed this session.
- Fix sigma_i2c_write() (SigmaStudioFW.c): no retry on I2C failure meant a single
transient NACK anywhere in a long safeload burst (EQ apply = ~55 sequential
transactions) aborted the whole sequence. Added a 3-attempt retry.
- Add granular failure logging (AudioService::applyProfileToDsp/persistProfile,
Adau1701Driver::applyMixer/applyEq, NvsAudioProfileStore::saveProfile error
codes) to isolate the remaining NVS-side audio profile save failure.
- Si4684Driver::tuneFm gains an optional ANTCAP argument (default 0 = unchanged
auto-tune behavior) used during this session's front-end matching sweep.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Streaming (main feature this session):
- New WebRadioConfig/WebRadioJson core types, ISecureStore-backed persistence
- New webradio::WebRadioService (thread-safe live config) + GET/POST /api/streaming
- web_radio_stream task now runtime-toggleable (no reboot), no hardcoded URL
- Content-Type diagnostic: warns clearly when a URL is a webpage, not an audio stream
Boot cleanup:
- Removed boot-time auto FM/DAB tune, auto-beep, and the (now-concluded) Si4684
crystal IBIAS/CTUN empirical sweep from main.cpp — tuning/beep are on-demand
via the existing REST API only
Web UI:
- Modernized styling (cards, gradients, toggle switches, light/dark theme)
- New Stream tab wired to /api/streaming
Fixes found via real idf.py build (not just clangd):
- Restored wrongly-removed si4684/Si4684Tuner.hpp include in main.cpp
- Fixed MP3Decode() argument types in web_radio_stream.cpp (unsigned char**/int*)
Quality-gate fixes:
- Host-test stub headers (esp_log.h, freertos/*) so TunerService.cpp's
scanForStation logging/pacing compiles for station_service_test /
integration_service_test instead of running stale binaries
- Added WifiScanner and WebRadioService manual sections; filled in missing
Doxygen docs on BluetoothService, i2s_sdata_probe, test_firmware, Bt1035At
- Ignore clangd's .cache/ index directory
Also includes prior uncommitted work carried in the tree: Wi-Fi/Bluetooth
device scan REST API and UI (WifiScanner, BT scan), SigmaStudio TCP bridge,
and the current ADAU1701 SigmaStudio DSP program export.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Align README, manual, and backlog to 0.8.4; add Web UI System tab for OTA/DSP uploads, serial in health header, FM seek down, and BT1035 paired list plus auto-reconnect API.
Co-authored-by: Cursor <cursoragent@cursor.com>
Stream application binaries to the inactive OTA slot via POST /api/system/ota,
validate the esp_app_desc project name in core, and cancel rollback after a
healthy network boot through OtaService::confirmBoot().
Co-authored-by: Cursor <cursoragent@cursor.com>
Replace the services stub with IntegrationService for boot preset recall and tune orchestration, persist last preset in NVS, and remove invalid @return tags that broke CI on T4 metadata headers.
Co-authored-by: Cursor <cursoragent@cursor.com>
Ship station reorder, DAB playing ids in presets, RDS PS/RT and DAB DLS in tuner status, Si4684 data-service read, host tests, and UI now-playing lines.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose discoverable mode and A2DP control over REST, add persisted
DAB/FM preset list with web UI, and document gaps in docs/TODO.md.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose POST /api/audio/stereo-enhance and bass-enhance with 0–100 levels,
persist enhancements in AudioProfile, and document the virtual EQ mapping in
the manual and SigmaStudio chapter.
Co-authored-by: Cursor <cursoragent@cursor.com>
Safeload mixer/EQ/master on the ADAU1701, persist AudioProfile in NVS,
expose /api/audio routes and web UI controls, with host tests and manual sync.
Co-authored-by: Cursor <cursoragent@cursor.com>
Implement ESP-IDF walking skeleton with SoftAP, health API, and host
tests, then Slice 2 ISecureStore/NvsSecureStore, STA join, POST
/api/wifi, and the provisioning web UI.
Co-authored-by: Cursor <cursoragent@cursor.com>
micheleandClaude Sonnet 5