Refresh BOM (2026-07-09 CSV), Gerbers, EasyEDA project, pick-and-place, and schematic export; document corrected ADAU crystal/PLL strapping and Si4684 reference clock in the manual; add PCBWay acknowledgement on the back cover only.
Co-authored-by: Cursor <cursoragent@cursor.com>
Add wrapping table columns, breakable paths, and ragged callout boxes in digiradio-manual.sty, then reflow long endpoint headings, JSON examples, and hardware/driver tables to stay within page margins.
Co-authored-by: Cursor <cursoragent@cursor.com>
Switch BT1035 bring-up from Line-In to I2S slave (AT+AUXCFG=3, AT+I2SCFG=67) to match the ADAU1701 PCM routing, confirm 2 kΩ I2C pull-ups on R1/R16, and sync firmware docs, AGENTS rules, and the DATASHEET bundle.
Co-authored-by: Cursor <cursoragent@cursor.com>
Enable GPIO_PULLDOWN_ENABLE during gpio_config so RSTB cannot glitch high before gpio_set_level(0), and add manual validation notes explaining why the internal pull-down complements the external one.
Co-authored-by: Cursor <cursoragent@cursor.com>
Implement Bt1035Driver AT init (AT+AUXCFG=1), core AT parser with host tests,
wire boot into HardwareBootstrap, and document DAB/FM tuning workflows in ch-si4684.
Co-authored-by: Cursor <cursoragent@cursor.com>
Document the ADAU1701 schematic chain (sigma-chain.jpg), cross-link from
hardware/firmware chapters, skip safeload on fixed high-pass band 0, and
match EqProfile default peaking frequencies to SigmaStudio.
Co-authored-by: Cursor <cursoragent@cursor.com>
micheleandCursor