Implements GET /api/audio/levels, reading all six 1×RTA level-detector
cells on demand (no background polling, no caching -- only runs when
called, per explicit request this session).
The read mechanism is the ADAU1701's documented Data Capture Register
(address 2074/0x081A, datasheet Rev.0 pp.30,36: write a (program-step,
register-select) pair to configure what the register mirrors, then
read back a 3-byte 5.19 twos-complement value). The per-meter program-
step indices are taken verbatim from SigmaStudio's own compiler output
(Firmware/ADAU1701-Firmware/IC 1_DigiRadioFinale/net_list_out2/
trap.dat), not invented -- the datasheet explicitly says these indices
must come from that compiler-generated file.
Confirmed live: all six points return distinct, plausible dBFS values,
and the output meters track a master-volume change.
Also folds two pieces of live user feedback into the app brief: the
volume slider should reach +12 dB (the firmware's real ceiling), not
stop at 0 dB, and the new levels endpoint is what a "VU meter" UI
section should poll instead of faking one.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds the new SigmaStudio project export (Sigmastudio.zip, source
screenshot) alongside the existing project archives in Sigmastudio/,
rewrites docs/adau1701-sigmastudio-analysis.md for the 224-parameter
program (exclusive source mux replacing the old mixer, Bass Boost1/
SPhat1 dedicated blocks, unimplemented VU-meter readback), adds the
DigiRadioFinale figure/table to the manual, and adds a brief for the
iOS app side (active_source API shape, enhancement semantics change)
to hand to Cursor.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Root cause (found via SigmaStudio firmware analysis requested this
session): NVS was initialized AFTER HardwareBootstrap::boot(), which
internally calls AudioService::loadAndApply() to restore the saved
mixer/EQ/master-volume profile. Every nvs_open() inside
NvsAudioProfileStore::hasProfile()/loadProfile() failed with
ESP_ERR_NVS_NOT_INITIALIZED (0x1101), silently swallowed as "no saved
profile" -- the audio profile was never actually restored on any boot,
regardless of how many times it was saved via PUT /api/audio/profile.
Fixed by moving secure_store::initEncryptedStorage() to the top of
app_main(), before HardwareBootstrap::boot() (nvs_flash_init() has no
hardware dependency, so this is safe).
Second, related bug: HardwareBootstrap::boot() called
AudioService::applyRadioFirstMix() unconditionally right after
loadAndApply(), discarding any just-restored mixer/master values on
every boot. loadAndApply() now returns whether it actually restored a
profile from NVS; the radio-first fallback only applies when nothing
was saved.
Verified live: a distinct mixer+master+5-EQ-band test pattern now
survives a full reboot exactly as saved (previously always reset to
factory default). DAB/FM/BT unaffected.
Also: added a "locked" flag per EQ band in the audio profile JSON --
band 0 is always locked (fixed high-pass, Adau1701Driver::applyEq()
never safeloads it) and bands 1-2/3-5 are locked whenever
bass_level/stereo_level is active (core::applyEnhancementsToEq()
overwrites them with formula-derived values). This was previously
undiscoverable from the API -- GET echoed back the stored, inert value
with no indication it wasn't what was actually playing.
Full register-by-register analysis of the compiled SigmaStudio program
(signal chain, all 74 Parameter RAM addresses grouped by function, HTTP
API mapping, every endpoint tested live) in
docs/adau1701-sigmastudio-analysis.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
micheleandClaude Sonnet 5